How to create this effect?

Here's the video... I concentrate on the slomo to accelerate the effects, I know it sounds simple, and it's probably, but how?

01:20 - 01:25

First, shoot at a higher level than the normal rate. At least 60 (59.94) fps. Then, import your images in AE or Premiere Pro. Finally, adjust the speed of playback.

For example, if you put the clip in After Effects you would go to the interpretation of the file and change the interpretation of the images of 60 (59.94) FPS to 29.97. This will make the images read at half speed. One second of real time will take two seconds of screen time. Then you start a new publication which is 29.97 FPS. Then you could time-remapping. You will see two keyframes, one at the head and the other at the tail of the shooting. These keyframes represent time. Now, rub through the shooting and choose the points where you want the speed to change and add additional keyframes. Here's the tricky part. Let's say you want the first two seconds of the shot to play in real time, so you want the next 2 seconds to play in slow motion, then the next second 1 in real time then the last segment of the shot to play in slow motion (half speed). You would set keyframe at 2 seconds, keyframe to Keyframe three to five seconds and 4 seconds, and 6 of the keyframe at the end of the clip. Now, you position the CTI (current time marker) to 1 second, take all the keys except the first images and make them slide to ICT with the SHIFT key to make the keyframe 1 aligns with the ICT. You have now accelerated the first two seconds of the sequence so that it plays in real time. You now have keyframes at 0, 1, 3, and 4 seconds and the last one second before the end of the clip.  Then, you move the CTI to mark 03:15 (three and a half seconds), select the two last keyframes and do the shift drag turn again to compress the time between Keyframe 4 and 5 for the half a second key frame. Who's going to do.

This:

Becomes this:

The speed graph looks like this:

The fastest angle the clip plays back.

An easier way to do may be to split the clip whenever you want to do a speed change.

You can also do this in Premiere Pro simply clip cut into pieces and adjusting the speed of playback of each segment. It's not difficult, but it is very difficult to make it really good look unless you shoot at a higher rate that you use for your project.

Tags: After Effects

Similar Questions

  • How to create this effect of shadow to the text?

    Hi all

    I don't know what I should call him, but I've seen a number of this shadow effect behind the text 'SALE' and always wondered how to do this.

    I tried to mix the tool with text copied to 45 degrees, but it doesn't seem to work.

    Is the pen tool to create the shape manually the only way to do it? or is there another way?

    Thanks in advance!

    Screen Shot 2016-02-12 at 1.18.38 PM.png

    Take a look at the plugin by 63mutants Oct.

  • How to create this effect of cool scroll as shown in this Web site

    Hi all

    Please visit www.august.com

    How should we do replicate the way in which the top image gets 'hidden' in the bar of navigation as well as the images below when one scrolls down, in Adobe Muse?

    I am new to the program and need urgent help with it! Do not copy the website but copy this feature "hide"...

    Thank you!

    Hello

    If you try to reproduce the effect of the menu at the bottom that move upward and stays there for the rest of the scroll to the bottom of the site, then it is possible. This effect is possible by using the effect of Parallax of Muse. Here is a link for parallax scrolling tutorial of muse: http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-parallax-scrolling-may-2013/

    I can give you the settings I used to achieve this effect on my site. Here is a screenshot:

    Hope the helps of information.

    Kind regards

    Fox

  • How to create this effect "scattered edge?

    Screen Shot 2014-12-23 at 10.49.16 PM.png

    I found this image on the internet, and I'm trying to reproduce the effect of dissolved/dispersed edge what do you see in the shadows.

    I tried all the filters/combination of filters on photoshop, but none of them work. Was the closest I've gotten using brushes custom (with a spacing and scatter XY), but it is not very effective and is not as clean as you see in the example.

    There must be a method to instantly dissolve the edges of a shape (sounds simple enough), but I can not just know how to do. Please can someone help me?

    For a little more clumping follow with this step...

  • How to create this effect of brilliance?

    Hello

    Currently I'm building a master based on the work of someone else.
    I'm redoing a glossy effect, but I can't understand how she did it.
    In one of the files, I found out how it works.
    The glossy effect is a Pentagon placed on top of an image, as in the photo I've included.Helpimage.jpg

    Can someone help me on how to recreate a Pentagon like this?

    Thank you very much in advance!

    Check the color of the polygon overlay and it's blending mode and transparency in the effect controls panel.

  • How to create this effect of pixel juxtaposed?

    Hey guys really need to understand how this image has been created...

    image.jpg

    first of all it has been done in photoshop? If so what techniques? I tried to use colors indexed image > mode, with palette > uniform dither, > model but when even does not have the high quality that these guys here got. I tried to save as a gif/png with pattern option selected in photoshop and illustrator, still no success. Was - this fact using pixelbender? or some type of plugin? in any case, really need to understand that. appreciate any help you guys can provide. Thank you.

    It took a few tries but I was able to emulate this look by working at 400% of the final size, and using the filter halftone color filter - Pixelate - applied on a layer to grayscale, inverse and mixed with the underlying layers using overlay.

    Here is a small part of what the filter of halftone color generated at 45 degrees, RADIUS 6 pixels:

    Here's a PSD file, where you can see how I mixed it in detail:

    http://Noel.ProDigitalSoftware.com/ForumPosts/ColorHalftoneDemo.PSD

    -Christmas

  • How to create this effect of title?

    Please take a look at the first five seconds of this video:

    http://Vimeo.com/5644416

    My customer wants an opening like that.  I * think * this is something that is built into Final Cut Pro, but I could be wrong.  Someone make a program that works with the first (or standalone on a PC) to create titles like that?

    J. D.

    You can do this with After Effects by using '3D text '.

    -Jeff

  • How to create this effect roll in DW

    What is does in frames? How can I create buttons animated like the ones on this page. Click here

    Just click on any CAP and you will see that they have thumbnails grouped on the left side and when you click on one, a larger image and appears on the right of the clicked tile.

    I'd like to create a site with similar functionality for different products. Not sure if it is more a specific matter DW and FW, maybe both. Thanks for the pointers.

    Figured this out. I didn't put a name in the property box, so when I went to swap image behavior, all images have the same name. Putting a name in the property, you can choose which image you want to swap on another table or cell. I couldn't remember for the life of me.

  • How to create this effect of movement of the 3D effect?

    Hi, this is my first post.

    On Brad Kremer Hayaku video: A Time Lapse Journey Through Japan,.

    https://Vimeo.com/12112529 . to: 22.

    What is the use of technical effect on the: 22 (men of the street, background moves but not the subject of front)

    Hayaku A Time Lapse Journey Through Japan on Vimeo.png

    Is effect a new 3D with Photoshop or Afrter effect.

    What is the name of this type of effect.

    Could find us a tutorial on Adobe.

    Thank you whatching and answer

    Stone fountain

    Yes a fantastic film.

    Here's a good Creative Cow 2.5 D tutorial:

    And here's another good to animate a still from video Copilot

  • How can I create this effect to text and shine?

    I wanted to know how to create this effect of text (there is a gradient on the text and the race seems to be beveled) in Photoshop.

    Image

    Also, how can I create this effect of gloss on this image?

    Image

    Thanks in advance.

    :)

    The text I believe is a simple style using bevel and Emboss. A sample of what I think they did is attached. I used black Ariel for the police.

    The background is a 50% gray

  • How to create the effect below

    SMS (oru kal oru kannadi) HD song .mp4 - YouTube

    In this song, the heroine walks on the bridge (03:40 - 03:43). How to create this effect using after effects software?

    Read this thread: How to get to this effect

    The answer is basically that it is just to jump time by moving the shot. There are many ways to do it. I just explained a.  You must be quite familiar with the intricacies of EI to remove. There is no magic button.

  • How can I create this effect speckled?

    Untitled-1.png

    Can someone help how to create that effect speckled in the corners of objects?

    Von Glitschka's brushes to shade large grain.

    You may need to add points of angle manually, however.

  • How to make this effect of line?

    Good people, probably an easy answer, but I just can't understand try it!...

    I am trying to create this effect in Illustrator, but after an hour by train, I hit a brick wall:)

    Anyone knows a method on how to do it? I need lines like vector and separate so they can be changed individually.

    Hoping that,.

    Steve

    shape.jpg

    Try a mix:

  • How to create this type of drop shadow to a vector

    Hello!

    I wanted to ask you how to create this type of drop shadow to a vector in illustrator. I've seen these files and tried a lot to create that effect

    123.jpg

    The shadow under the letters make this beautiful banner.

    Any help would be appreciated.

    I wouldn't have the effect of "vector". I could do this:

    1. Select the text object
    2. The background/contour value 'None '.
    3. Add 2 attributes of filling level of the objects in the "appearance" Panel
    4. Give the top of the page a 'white' and low 'Black.
    5. Select the fill 'Black' and it has an effect of "blur".
    6. Set the transparency of the fill black to "multiply".
    7. Save the appearance as a 'chart' Style and assign to each character separately

    If you want to change the character of a select skin, make the changes, and 'Option' drag the thumbnail from the appearance on the graphical Style available today. The changes will appear at any location, the Style is used.

  • How to create this extended granulated texture of noise/grain?

    Hi, I'm aware of the photoshops useful grain textures and adding noise etc, but I am desperately looking how to create this type of texture? It appears not to be through grain or noise as the formatting and overall spacing between individual points is quite unique. Ive tried to use a sparse brush but still does not have the same effect as some points overlap.

    Any help is appreciated!

    Screen Shot 2016-05-11 at 12.58.16.png

    As a temporary solution, you should consider to make a selection of the segment of the current structure, Edit > as motive, then change > fill with your newly created pattern

Maybe you are looking for

  • see the update panel

    Hi all I have a question about chart updated in LabWindows/CVI. My question doest do not plot, but the chart legend: how avoid the "legend flashing effect" when I refresh my chart? Please see below my function... (Note that the following options are

  • Update OKR 6 - RESOLVED

    Recently some users have reported errors when using OKR 6. Error is unable to make recovery disks running OKR 6 windows. Lenovo is already an update - you can download it here Edit: link fixed

  • my computer has a 871122 error how can I fix it.

    my computer is showing error 871122 and will not let me on the internet.how can I do?

  • burner does not get recognized

    The computer is HP pavilion 7955, XP home edition. There are two features of optical disc. The first is a HP cd-writer. This device does not get recognized and does not appear in my computer screen. When the button open the tray, there is no green li

  • ERROR on SCREEN BLUE - DRIVER_IRQL_NOT_LESS_OR_EQUAL (Windows 7)

    I am a user of Windows 7 bits (64).Recently my PC (DELL Latitude E6320) crashes randomly, showing a blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL Also in my device manager there is an unknown device, details below Can someone help me solve this?