Similar Questions

• 0x8004fe21 - "this computer is not running Windows" - KB3024777 update does not resolve the issue

  Hello

  My Windows 7 has been giving me some problems lately. I get messages that "this computer is not running genuine Windows" (0x8004fe21). I'm running a genuine version of windows, and when I check the properties of my computer, it tells my that I have in fact validated my copy of Windows 7.

  I also had a problem when new updates to Windows Update settle not and after a few google searches, I have concluded that this must have been caused by bad KB3004394 update.

  It has been suggested that I deleted this update, but it did not show anywhere under installed updates.
  It has also been suggested that I downloaded the patch of "quick fix" KB3024777, which is supposed to remove the faulty update.
  I did, and since then, the issue of windows updates has been resolved. Again installing the updates of windows, but I still get messages I'm not authentic Windows.

  In addition, I tried all sorts of things, I found in online forums, but I don't remember exactly what those who were, because most of them were things that I didn't understand.

  Maybe you guys can help. Thank you in advance!

  I was told to run MGDiag and post the results here so here go us:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {DFF68C19-1503-487E-A692-8C435EF12F1F} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150316 - 1654
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {DFF68C19-1503-487E-A692-8C435EF12F1F}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-3113075717-3854388810-3852344427Dell Inc.. L421X XPS Dell Inc.. A14 20130522000000.000000 + 00011A80F00018400FE04130409Malay Peninsula Standard Time(GMT+08:00)03DELL CL09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1043-7601.0000-1052015
  Installation ID: 019613804902779735492485549691725206407303392291262906
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 19/04/2015-16:10:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 4:15:2015 22:03
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LgAAAAAAAQABAAIAAAABAAAAAwABAAEAln3yCEagjqxGq8ILYPbwHZ5vvtyWYw ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  CL09 DELL APIC
  CL09 DELL FACP
  DBGP DELL CL09
  HPET DELL CL09
  STARTING DELL CL09
  CL09 MCFG DELL
  TCPA DELL CL09
  CL09 DELL SLIC
  CL09 DELL UEFI
  ASF! REFERENCE DELL CL09
  CL09 DELL SLIC
  SSDT CRV COMPAL ORB
  ASPT DELL CL09
  FPDT DELL CL09
  SSDT CRV COMPAL ORB
  SSDT CRV COMPAL ORB
  LAURENCE DELL CL09
  SSDT CRV COMPAL ORB
  SSDT CRV COMPAL ORB

  I don't see anything abnormal in your report - which probably means that the problem is a race condition where your AV is to win the fight for access to certain critical files when the Service for the Protection of software needs to access.

  Certainly, it will disappear after a few days.

• Designjet T1100ps 44 inches: update Firmware to resolve the 81:03 error?

  We get errors 81:03 in the middle of several pages in PDF of print jobs.

  Our current version of the firmware is: TJ6 - TAJ6_6.0.0.4

  Does update the firmware? If Yes, where can I find the latest version for download?

  Any help is greatly appreciated.

  L

  81:03 is an error with your preliminary media.  You can try to restart the printer, power down at the back and unplug the power cord.  Well that off and unplugged hold the power button the front panel for 10 to 15 seconds.

  This can sometimes erase an error that is logged in motherboards will not erase.

  Looking for FW go to... HP.com-> Support tab-> enter your printer information.

  The T1100 is an obsolete printer, so HP has ceased to put the newer versions of FW and get parts through them will be difficult, because they no longer support this model of printer.

  I would recommend examines a new plotter, using a refund from HP for the T1100 should ago get a discount from nice on the new machine.

  I hope this helps.

• Is there a service pack for Windows 10 update that may resolve some of the problems in the Adobe programs?

  I've loaded a service pack when I installed CC 2014 on Windows 8.1 but now that my computer is running on Windows 10, shouldn't there be a service pack update? It seems like everyone using Adobe programs that are passed to 10 WIndows knows problems that maybe set a new service pack?

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  For Win10, I think this means that CC2014 will not "fixed" because the "fix" is the most recent version

• The strange characters that appear after Adobe Flash update

  After updating to the latest version of Adobe Flash, there are weird characters on the tabs at the top of the screen. I'm a little worried what may be.

  Hello ka5biw, this is a defect caused display extension Advisor to mcafee site - please try to disable or remove that in case you have a present that there is a mcafee update that may resolve the problem.

  http://service.McAfee.com/faqdocument.aspx?ID=TS100162
  https://community.McAfee.com/thread/76071

• Clicking on a video clip selects the entire clip, rather than the range.  I did the update and it still happens.  Help!

  Problem * by clicking on a video clip selects the entire clip, instead of cuisiniere.* *.

  I restarted my computer like new.  Lost the iMovie app.  Re downloaded in the App Store.  Now I have a crappy iMovie on the App Store application.  Then I made, I got the updated version and I did.  Always update does not resolve the problem.  I'm sucking in a hole because I need to make new videos for work and I can't.  In addition, I'm too broke to buy Final Cut.  In addition, all apple stores have a waiting list of 5 days before they see you!  Thank you Apple with a 6 bites taken out of it!

  I had a similar problem and it was driving me crazy. I think you press and hold the 'R' key now to select a range, otherwise, it will select the whole clip. I think it's a goal a feature and not a bug? Hope that helps!

• Thunderbolt Display Firmware update could not complete.

  Hello.

  Am myself a brand new Mac Pro recently and I'm loving it. Hooked up to my old TB screen which is unused to cause a few months the all-in-one cable is broken. Not much, I bought a cable TB, and used only to plug it in and it works fine.

  That is, until I went in the App Store and noticed a firmware update for display among all other system updated. I do not think that anything of it in time and just continued to download and install all updates in bulk. Well, after all has been said and done I got the popup saying he could not apply the on-screen since it must route the cable all-in-one to do. Not a problem, I thought, it's not that important to me it is installed. But now after whenever I restart the machine, I get the annoying popup even in my face, no matter what I try to do to remove it. I'm fine with not getting updated, I just want this bitch popup go away!

  I am a very advanced user, so I am not against the orders of terminals and/or editing plists performer or that you have to solve this problem. I don't know where to look and I thought this would be my last ditch effort fixing before you say screw it, wipe the system and start over. If no preview of this would be useful. Thank you.

  Apple doc:

  Thunderbolt Firmware Update 1.2: continues to reappear and Thunderbolt ports and target Display Mode may not work

  After the installation of Thunderbolt Firmware Update 1.2:

  • The Thunderbolt ports may not work.
  • Target display mode may not work.
  • The update can keep reappearing as available for download.

  This happens when one Thunderbolt self-powered (other than one directly connected Thunderbolt display) device is connected to a Thunderbolt port during the installation of the update. To resolve this problem:

  1. Shut down your computer.
  2. Disconnect all devices Thunderbolt.
  3. Wait for 10 seconds.
  4. If you use a Mac mini with a Thunderbolt screen, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other devices Thunderbolt at the moment.
  5. Restart your computer.
  6. If sight Firmware 1.2 update is available, download and install and restart your computer when asked. If the update of Thunderbolt is not available, the update has been successfully installed.
  7. Reconnect all devices Thunderbolt.

• White screen to update the Portege M400 firmware after waking from sleep state

  Why this topic has been closed? http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19803&MessageID=74193

  I just wanted to add that this update does NOT resolve the problem in vista and it is NOT a driver problem. The update will not install in vista and vista is already provided with videoprt.sys 5.1.2600.2911.

  When it occurs, the laptop again indeed. You can manipulate and even hear the sounds, but the backlight does not come on or there is no output from the video card. I'm fairly certain that it is a signal of hardware problem.

  No matter what laptop I, euro or us, could someone please tell me the file so that I can look at what changes actually code?

  Hello

  > Why this thread has been closed?
  I think that the admin closed this thread because, as indicated by the user lumix2day the MS update has solved this problem.

  The M400 was delivered with Win XP it's why the update should work with Windows XP!

  Regarding your question.
  Looks like you are using your own copy of Vista on the M400.
  You should check if Vista is already up to date. Each week the new MS updates are published.

  Additinally, I recommend updating the BIOS and check for a driver update more recent display!

  Best regards

• Satellite A500 - cannot update the BIOS (error message)

  Hello

  I have a PSAR3A - 02U002 Satellite A500 with BIOS version 1.9 is installed.

  After reading several forums, I discovered that there may be a BIOS (v2.0) update available to resolve the current problem, these Satellites have with overheating cooling switch down.

  Excited, I have tried to install the new BIOS - this is what I get:

  "There is an error occurred, please check below the elements."
  BIOS version more than 200.
  Battery capacity more than 10%.
  AC is fixed. »

  First of all, my BIOS version is 190, no more than 200. Second, I find it very difficult to believe that the battery must be less than 10%. And third, I don't see what that remove the power supply cable will do.

  Please note that this update of the BIOS found on Toshiba's European website, but v2.0 claims to be a worldwide release. I then checked on the Australian site and there is no BIOS for my model. I don't know how to interpret this contradiction.

  Help, please!

  Hi umm_excuse_me,

  So I think that BIOS update is not available at this time for you. European and Australian models have different model numbers, so I doubt that the update of the BIOS is always the same. The pieces of equipment may also be different.

  In your case, I would wait until the BIOS was released on the page Australian too.

  By the way: where did you read that this update was release in the world?

• Can not boot from HDD after bios update [Z510]

  Hello

  I've just updated my bios on my Z510, and now only boot options I have is the network boot, something that I don't use.

  I used the tool to update the bios that Lenovo is distrubiting from page of the drivers for my PC.

  Can someone help me with this?

  Hermonella wrote:

  Hello

  I've just updated my bios on my Z510, and now only boot options I have is the network boot, something that I don't use.

  I used the tool to update the bios that Lenovo is distrubiting from page of the drivers for my PC.

  Can someone help me with this?

  After the bios update, try to resolve everything by default, and then save. Then change the settings of date back to the time you have not yet updated to the bios. Save and exit.

  Because you don't want to initialize the network try to disable it in the bios.

• Updated patch or fix, even a pilot?

  Hi I have a HP Pavilion DV7, and facing a problem with my HP BD Rom model player BC - 5550 h that it will not recognize a BD - R disc? It happens with just the message cannot read the disc, please insert the floppy disk or drive not recognized?  Its frustrating and now a little expensive because I'm sitting on a BD - R Memorex discs 10pk and cannot use them as Frisbee.  If anyone knows a fix, patch, an updated driver that resolves this problem I would be very happy, thank you.

  Hello

  On this basis:

  http://www.Sony-Optiarc.EU/products/bluraydrivesnotebooks/ bc5550h.html

  The optical drive (ODD) on your machine can ONLY write data to void (or rewritable) DVD and CD, he can't write anything to blank BD discs. It only reads BD and BD movies.

  I hope this helps.

• Updated same guard resettlement (KB983583)

  No worries. Some Net Framework has been corrupted. I lived the same problem on my XP3. Add/Remove showed updated installed but MBSA wanted me to install & so was the auto update by downloading it again & again. Installs repeated does not solve the problem.

  Finally, uninstalled all net frameworks, cleaned up the C drive & rebooted. Reinstall all net frames in sequence & Ran MBSA 2.2. He advises to install some updates, installed their & the problem is over. Everything is back to NORMAL. No warning was updated

  To resolve this problem, please follow the steps mentioned in my blog: http://blogs.msdn.com/b/smondal/archive/2010/08/19/kb983583-is-re-offered-by-windows-update.aspx

  Or just see http://support.microsoft.com/kb/2262911 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista updates which will not install

  My OS Vista Home Premium 32 - bit for my HP Pavilion a6460t computer will not install the updates listed below.  I scanned for virus conficker, as well as for other viruses, most recently with the Microsoft OneCare security scan (beta), and my computer is not infected according to these analyses.  I have also tried installing these updates directly from the websites of download from Microsoft without success ("the following updates were not installed").  Auto update is on.

  Update security for Windows Vista (KB960225)
  Update security for Windows Vista (KB958690)
  Update for Windows Vista (KB959772)
  Update definition for Windows Defender - KB915597 (definition 1.55.1119.0)
  Update for Windows Mail Junk e-mail filter [March 2009] (KB905866)

  Thank you

  Ron Alexander

  After several calls to the technical support of HP (which is also the warranty service for my Vista installed factory), the problem of update is finally resolved by reinstalling the operating system Vista.  Thanks again for all your help and suggestions.

  Ron Alexander

• Problem printer with XP updates

  I updated to XP and lost the ability to print on my HP OfficeJet Pro 8500.  Other users has solved the problem by doing a system restore.  My restore feature has been turned off, so I did not have this option.  Another way to reverse the cause something updated or otherwise resolve the issue?

  Hi Hadley,

  We would require the following details to help you best.

  (1) do you get an error when your computer fails to print?

  (2) update do you have installed?

  (3) is the issue limited to any particular document?

  You might face this problem if the printer drivers are corrupt. Follow the steps below to solve the problem.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can download the latest drivers form the link given below.

  Driver downloads &

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3752456

  You can follow the steps below to check the installed Windows Update and provide us with the number that caused the problem.

  (a) click on the button "Start" and select "Control Panel" from the menu that appears.

  (b) double click on "Add / Remove Programs' to open the list of programs currently installed on your computer.

  (c) click on the box next to the option 'see Update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  You can turn on Restor system on your computer by following these steps.

  (a) click on 'Start' and then 'right click' on ""my computer ' point and select "Properties". ".

  b) in the "System Restore" tab, uncheck "turn off System Restore', press 'OK'.

  Write us with the details asked. We will help you to come up with the question.

• cannot access windows update - windows freezes a startup (error 0x8007043C)

  original title: cannot access windows update - windows freezes a start-up

  Error number: 0x8007043C when I try to access windows update. I tried to restore my computer to an earlier date without result. Windows hangs after login. Not sure if this is a update problem or another problem.

  Error number: 0x8007043C when I try to access windows update. I tried to restore my computer to an earlier date without result. Windows hangs after login. Not sure if this is a update problem or another problem.

  Do some basic cleaning and updates that may resolve your problem (also - check your time and date - as well as your setting time zone...)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you will use the aggressive version if given a choice):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.