ERROR on SCREEN BLUE - DRIVER_IRQL_NOT_LESS_OR_EQUAL (Windows 7)

I am a user of Windows 7 bits (64).
Recently my PC (DELL Latitude E6320) crashes randomly, showing a blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL

Also in my device manager there is an unknown device, details below

Can someone help me solve this?

Hello Gonçalo,

This error is generated when a driver or part of Windows tries to access pageable memory using kernel IRQL process that is not valid.

Method 1:

Make sure that you have the latest drivers for your video card and network card installed.

Reference:

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

Method 2:

Boot into safe mode and system restore:

Reference:

Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

System restore

http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

Similar Questions

Error on screen blue/black (cannot start pc)

In the middle of the day that my pc everything went black without reason... by the time I could still hear people talking about other software, and they could hear me fine. I restarted my computer, but when he started upward I got was a black screen with colored horizontal lines. Whenever I try to start my pc it does this or is a blue screen that has repair options. On the repair options, I try to restore my PC, but it requires a password for my account profile computers that I disabled the past few months. I also try to reset my pc everything but it says "Insert your installation or windows recovery media" who am I to all too well. but I tried to put the windows disk 8 in which he refused to take.

Help, please!

Hi Tom,

Thanks for posting your query in Microsoft Community.

According to the description of the problem, I understand that your computer has become suddenly black and now in any start-up situation with the blue screen repair option, correct me if I'm wrong.

Blue screen (sometimes referred to as errors or errors of STOP code black screen) errors occur if a serious problem, windows to shut down or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

To better understand this issue, I would like to know the following information:

1. What is the brand and model of the computer?

2 did you receive an error message before the computer went black?

3. did you of recent changes to the computer before this problem?

4. are you not able to start on the screen?

5. When you say "I tried to put the windows disk 8 in which he refused to take", is the DVD drive on the computer that works well or not the same bed on another computer in Windows 8 support?

When you say "on the repair options, I try to restore my PC but it requires a password for my account profile computers that I have disabled months ago" I suggest you try the enter without specifying a password and check if it allows to connect to the user profile that you have disabled the password long ago.

If you are not able to connect with the system restore without entering the password, and since you're telling the DVD of Windows 8 refuse to take, I suggest you to create recovery USB Windows 8 media and then try to repair the computer.

Create a recovery USB disk

http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

Method 1: Auto repair:

(a) when your computer starts, wait for the logo of the manufacturer check the option of start menu, it will usually F12.
(b) the start menu key can be different with each manufacturer. If you are unable to find the start menu button, you can consult the user manual.
(c) restarts the computer, when you see the logo of the manufacturer, continue to press the Boot option menu key to enter the boot menu and change the option to boot in DVD ROM.
(d) once you start your computer by using Windows 8 DVD or system repair disc, a black screen is displayed with the gray text "press any key to boot from CD or DVD". Press a button on any.
(e) select the exact time and the type of keyboard.
(f) click on repair your computer in the lower left corner
(g) click on troubleshooting, advanced option and then click on auto repair.

Method 2: If the method above to perform the automatic repair does not help, I suggest to follow the article below and try to run the system restore.

Resolution of errors blue screen in Windows

http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

System restore warning: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

Additional reference:

Repair & recovery

http://Windows.Microsoft.com/en-us/Windows/repair-recovery-help#repair-recovery-help=Windows-8&V1H=win8tab1

Hope this information helps, just reply to the State of the question to get help.

We will be more than happy to help.

Launch UA screen blue on Windows 10 of Photoshop...! A solution?

Hi all,
I appeal to you today to pay understand why when I run Photoshop, 1 times 2 CELA cause a blue screen on Windows 10. It's unfortunate when you are working on several window.
Kind regards
JF PROUST

Hi JF.

Please see this thread BSOD when opening photoshop cc 2015 (Windows 10) and let us know if this helps.

Kind regards

Assani

(athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen

Original title: Blue error screen

I bought a laptop Toshiba Satellite M840. When I took my laptop to work, when all of a sudden my laptop crashed? It came with (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen. The problem is still ongoing and happens at least once a day, and it seems to be crashing more often?

I created minidumps.

https://onedrive.live.com/redir?RESID=B4BF3E5538F50D20! 119 & authkey =! AOTgLWC39ykXKi4 & ithint = % 2cdmp

Can someone help me solve this problem? Thanks in advance.

There are two questions.

1 - athw8x.sys (your wifi atheros driver)

2 - Symantec.

I would completely remove the atheros driver and remove Symantec and use the built in Defender

Remove the driver current completely and install the latest driver available. For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

HP Photsmart C7280 - flashing lights and error messages on blue when screen off the printer.

HP Photosmart C7280 All in One.

This 3 year printer seemed to install OK when I it connected via a wireless modem/router.

My turn and Lap Top printed ok for months. They use Windows 7 64-bit.

Recently when the printer was left off for a few days all its lights started to blink.

If I disconnect and reconnect it the power and cable modem/router, the printer works ok again until it is turned off.

The lights will start to Flash. Also, I'm getting 2 error messages on blue screen when the power is off and the lights are flashing...

B8SIFE84 blue screen error code still appears, and once I saw the blue screen B3772734 error code appear as well.

I deleted and reinstalled the device by using the printer software HP correct and downloaded and installed all the relevant printer updates that I can find. The problem still persists.

Help, ideas or thoughts to the subject of what to do to solve this problem would be appreciated.

Don't

Have sussed out.
Power supply is 'blacktus cactorum cactus. "
It is unclear when it is off.
Looks like this is a new printer for "don't" then buy HP shares and buy a 5 year warranty with the new printer.

window does not go past a blue screen that says windows can't connect me

Hi I have an older version of windows xp and that you downloaded an older version of quickbooks 2007 program a disc when it said to restart the computer I hit reboot and now my computer will display loading windows and then stop to blue screen with the windows logo, I can move my mouse but nothing happens I (use this computer very rarely) that it is an old but I still need it from time to time. help please. Thanks Rose

Hi Rose,

· What is the error displayed in the blue screen?

· Provide the full error message with the error code.

· What is the service pack installed on the computer?

· What is the number and the model of the computer?

Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

Dell Inspiron6000 / Win XP SP3: screen blue C0000218 (registry file failure) error - HELP!

Hello.

I'm a complete newbie to all this so please keep it simple for me :)

My laptop Dell Inspiron 6000 (purchased in 2006) has the blue screen of death. He's going through the process initial priming and then at the start of the Win XP black screen with the blocks moving on the screen to complete darkness for about 10 seconds then blue screen.

The initial error was as above with the title, as it reported:

The registry cannot load the hive file:

\systemroot\system32\config\default

or its log or alternation. It is damaged, missing, or not accessible in writing.

Laptop and then thrown out of physical memory and remained in that State until I put in now the power button power off / stop.

What I've done so far:

1 tried to start in safe mode - will not start to last known good config etc or in any safe mode - it lists various programs and then stops at themup.sys file then possibly a blue screen.

2. run the tree of symptom diagnosis for "can not boot the OS " - failed the following tests:

DRIVE IDE S/N [serial ]

read (error code 0F00:0244 ),

check (data error impossible to fix error code 0F00:1 A 44 msg block 346292 or media is write protected )

Passed the following tests: device self test, search, SMART, launch control (slowed down) unit, stop the command unit (standby mode).

3. with a Dell technician on the phone, we did the hard drive (DST short status test) diagnostic tests and the message returned was:

Unit 0: Status of the IDE failed status byte = 64 control code = 1 Msg no = no additional sense information.

The Dell technician has determined that the hard drive was not so I need a new. Is this true? Could there be any other cause?

4. run a Test Express via diagnosis - on confidence Test it reportedcode 0F00:1344 with Error Msg: block incorrigible data error 344575 or media is media is protected . Reinforced the message with several blocks - basically all one of 367933 to 346292.

Other information that might be relevant
1. A few weeks ago I remember an error message (think blue screen came then as well, but not as shown above), then it auto ran chkdsk, said something to be dirty, completed and started normally.
2. Some time ago (6 months), I did a "full backup of the system" through windows in which I myself remember a section of the disk has been partitioned "in case of emergency. Plug my Maxtor hard drive on my desktop, I can see the backup and explore folders - one is called windows and there a subfolder called to repair ; Another is called 'State system' with folders calledboot files , COM + registration database class , register . Is there a file called 'default' in there that I could replace the defective one with?
3. Windows XP is professional, version 2002 with Service Pack 3. I don't have disks, OEM installed.
What I would do:

Of course, to fix the computer, but as always, to retrieve the data I have on it (a lot!) as well as the programs/applications I have on it. A friend said use what we call "hirems mini xp"-apparently it starts from a cd and looks like a windows safe mode, then copy all data on my external Maxtor drive? Can I get to a point where I could restart windows normally and do a full save / copy data/applications?

Can I get another hard drive (assuming that the Dell technician is correct in that it doesn't have / does not) and transfer all the files from the old hard drive on my Maxtor external drive, then on the new hard drive (I read somewhere in these forums, you can get a kind of "box" usb Link the old hd once out , the new hd once in the laptop - it is a better option? Where can I get this kit?

I would appreciate any help/tips on how to recover from this situation.

Thank you very much

Hi again.

A friend (an very teccie one!) had a look and found that the head had crashed into the disc. He had not received a blow as it was probably caused by my turn off the card in the stop - I would have thought the transfer of energy from the battery car would not have had impact, but we live and learn lol - won't do it again. Ordered new hard drive...

Hope that helps

See you soon

HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

Hello

Please do not type in capital letters because it's difficult to read and considered to be shouting.

---------------------------------------------------------------------------------------------------

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

-------------------------------------------------------------------------

Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html

===========================================================

The system has RAID? If so, it's also very suspicious.

This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.

Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.

When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.

BCCode: 7F 0x0000007E which is also 0x1000007E

Cause

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.

Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).

Solve the problem

If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.

If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

In case of exception code 0 x 80000002, the trap frame provides additional information.

If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.

Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.

You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.

The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

----------------------------------------------------------------------------------------------------------------------

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during ' blue screen of the.
death ' crashes and displays information about all accidents of a table.
Free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.

You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Windows vista 64-bit crashing into the screen blue and often impossible to reboot after crash

My windows crashes constantly everytime I try to watch a video or go to a page with java, if I try to install the new version of Adobe, it stops it's self down and do not restart, just it becomes black and stops. I pay for membership to netflix and I can't even watch a movie. I go on youtube it crashes, I'm trying to play farmville on facebook, he crshes... in a blue screen and this is what I get when I start it again:

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8006F77030
BCP3: 00000000B 6000000
BCP4: 0000000000000181
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\Mini071911-04.dmp
C:\Users\DrGraceG\AppData\Local\Temp\WER-85098-0.SysData.XML
C:\Users\DrGraceG\AppData\Local\Temp\WER26A2.tmp.version.txt

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

July 20, 2011 Crash, 6 times

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80070B6030
BCP3: 00000000B 6000000
BCP4: 0000000000000181
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\Mini072011-01.dmp
C:\Users\DrGraceG\AppData\Local\Temp\WER-144456-0.SysData.XML
C:\Users\DrGraceG\AppData\Local\Temp\WEREBE4.tmp.version.txt

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

July 21, 2011 breaks down, 4 times

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007066030
BCP3: 00000000B 6000000
BCP4: 0000000000000181
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\Mini072111-03.dmp
C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

July 22, 2011 crashed 7 times

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007066030
BCP3: 00000000B 6000000
BCP4: 0000000000000181
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\Mini072111-03.dmp
C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

Many many people have this problem when I talk to others. Miscrosoft compromises our computers so we would have to buy new ones?
They know there is a problem and they don't even try to find a solution for this. In this economy, they force people to buy new computers, they will just leave people blocked company becase NOBODY takes the phone, if you do not have email, people don't keep in touch, if you are not on a social network or business networking nobody will know your business, you won't make any money nobody reads the ACTUAL newspapers these days, everybody reads the news on the internet. They only hurt people, they are forcing anyone to buy a new computer, people just can't afford it. Hundreds of thousands of people can barely keep their utilities on. In doing so I wish they will reconsider. I am disabled I will definitely cut if my computer goes down for good.

Can we do any smell that?

There are also a lot that I need to run startup until the restoration. Windows restarts after the crash of the blue screen, I reinstalled windows twice, it works fine until I have start to install all updates. I have only installed MSE and it still happens. I lost all my music I paid a lot of money for, my paintings for children, important documents, all because I had to reinstall windows twice now. I may have to reinstall them once more and I do NOT wish to install the updates again. He really never stops until I installed updates to windows. I thought that if I use the programs from Microsoft that it will work, because after all, it's all done by the same company, but no, nothing works. I am so in the sincere real despair. Be alone without technical skills, hardly what actually on my disability check, now I'm going to cut everyone. Now I can't do ANYTHING without it crashing, nothing fun anyway. I tried Microsoft fix, I tried so many solutions. I paid for Adobe photoshop, because I like to draw things and I'm terrified to install it. I'm afraid to do anything fun or useful on this computer.

If I can afford a new computer at any time, I think I will try Apple, I lost my trust in Windows. Unless they make an effort to solve this problem, then I would give them a chance again, but not if they will try to help. I'm so frustrated. I spend a lot of money on this computer, it's an ENTERTAINMENT laptop and I get not very amused.

What is going on?

Hello

Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
It is just like it loses power or stop it in the normal way? Heat associated
does not necessarily mean excessive heat, it could be something is too sensitive to the same
normal levels of heat. Also a computer will produce more heat as is pointed out how adding
software or updates, among other measures, causes it. Of course those actions should not
cause enough stress or heat to shut down the computer.

For a laptop on everything that you can do is reinstall the memory and clean the ventilation openings (still may try to add
a small fan as a test). Of course first remove all power.

This sounds like material so if the above does not help you then probably need help
a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
Support of system Maker.

===========================================================

Check this thread for more information on using BlueScreenView, MyEventViewer and other
Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

----------------------------------------------------------

BCCode: 124 0 x 00000124

This is usually heat related, faulty hardware, memory, or processor even if it is
"possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
and cables (at both ends) - actually delete and replace - are not just tight. Ensure
the system has proper ventilation - add a small fan blowing in the contributions. Carefully
Inspect the card mother and other cards for damage. Pay attention to the fatal material
error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
or other BigBox stores) or system manufacturer support.

There has been a few cases where Norton/Symantec and other antivirus/security
programs have caused this error.

BCCode: 124 0 x 00000124

Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
data provided by the error Architecture WHEA (Windows Hardware).

0 x 00000124<-- read="" this="">
* 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

=========================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

You can try a system restore to a point before the problem started when one exists.

How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

Startup Options recovery or Windows 7 disk repair

How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

U2515H, black screen with error during startup until the Windows login screen

It is a half frustrating work situation.

Was doing this:

display port HDMI card--> cable HDMI - HDMI--> HDMI U2515H port

This configuration has worked in Windows 7, with a 2560 x 1440 resolution reached.

However, when you perform a reboot of the machine, the screen went black and impossible to display the BIOS POST screen (these text showing the amount of RAM you have, what are the HD detected, etc.). In addition, there was an error message on screen, saying:

"The current moment of entry is not supported by the display. Please change your timing of entry to 2560 x 1440, 60 Hz or any other listed monitor calendar according to the characteristics of the monitor"

The message error and white screen persists until Windows loaded to the login screen. This means that I can't see even the Windows logo, or the safe mode selection screen if I press F8.

It's so no way for me to go into the BIOS to change any parameter, or do a boot was secure.

Tried to use a DVI-HDMI converter and also a DVI-HDMI cable to make use of the DVI port of my video card. Still the same error as above. Worse still, this implementation does not work in Windows 7, gives me a white screen.

I'm sure the DVI port on my video card works, cos it can work with my old Samsung monitor. Inspired by the present, the steps to be followed to the letter, may force the U2515H to show the BIOS screen:

1. stop down and power down the computer.

2 port DVI video card-->--> old Samsung monitor DVI port DVI - DVI cable

3. turn on your computer. The screen of the MESSAGE on the Samsung monitor.

4. go into the BIOS by pressing del screen

5 disconnect the cable DVI - DVI video card DVI port.

6 port card video--> cable DVI DVI - HDMI--> HDMI U2515H port

The thing is, if I have to keep the old monitor, why bother to buy the new U2515H from Dell?

So, how can I get the U2515H to accept the signal from my video card during the POST screen and the start-up phase, without going through the tedious steps each time? Thanks in advance!

Material:

motherboard: Asus P5K - E Wifi (latest version of the BIOS)

video card: Galaxy 8800GT (DVI, HDMI)

It seems that your motherboard ASUS has a slot PCIe x 16 blue. If one of the beaches mid PCIe x 16 graphics cards will suffice. Go here. I have this sort by Nvidia PCIe x 16 2.0 video cards, low to high price. You look for one with DP or CDM. Or simply go to a local store and search the PCIe x 16 video cards with DP or CDM.

Blue screen - cannot access windows

I have a HP Pavilion dv6 notebook with an Intel i-72670QM @2. 20 MHz processor. The version of the BIOS F.1B by seller Insydle. It is currently running Windows 7 (well it can run Windows 7).

The following error occurs: Windows has shut down to prevent damage to your computer. Weather I run Safe Mode or network mode I get the following technical error on a blue screen:

STOPx000000IE/OXFFFFFFFFC0000005, OXFFFFFA80092B2B2330, OX0000000000000000. OX000007FFFFFA1000)

The primary hard disk Self Test I ran long and short. No problem. Memory test passed. I realize that this has been addressed many times but I don't know what would be my next step. I have to get this laptop to factory-installed? If so, I need to be walked through this process.

Again, I apologize if this is redundant, but not so sure of me. Any help would be greatly appreciated. As it is now, the laptop is unable to serve.

Thank you.

You can access the BIOS settings by pressing the ESC key as soon as you turn on the laptop. You want to press the ESC key about 1 time per second.

This will bring you in the Start Menu above where you should see the option to enter the BIOS by pressing F10

Once there, you want to press F9 to restore default

Click Yes to confirm

Press F10 to save and exit

Then click Yes to confirm

If that doesn't work you should do a system restore through recovery Manager (F11 on the Start Menu to the top)

Various blue screen of death windows 7, Asus laptop

Experts/dear Microsoft community,

Recently I had some problems with my laptop. I tried reformatting and everything but nothing seems to solve the problem long term, brief (2-3 days)

My computer crashes (blue screen of death), whenever I play big games online. Games such as Company of Heroes, or Dota 2, etc. If I don't play these games solo (offline) I have no problems. Also all other programs work perfectly.

I have a feeling that it has to do with my Asus laptop drivers, I tried to update, restore and re - install, but without result.

To tell you that as the scenario for the crash: I start the game, I log on online, join a game. Then after 20 to 25 minutes of play online with no loss of FPS, it auto-shutsdown the game with absolutely no message, followed with an accident soon after, sometimes immediately.

Here's the accident report I got the program: Whocrashed

Look forward to hearing your suggestions.

Concerning

computer name: ICRASHEVERYWEEK
Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
Windows dir: C:\Windows
Material: N61Ja, ASUSTeK Computer Inc..
CPU: GenuineIntel Intel (r) Core i5 CPU M 430 @ 2.27 GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 4140355584 total
VM: 2147352576, free: 1929850880

--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Dumps are enabled on your computer.

Friday, November 7, 2014 22:01:49 this computer crashed
crash dump file: C:\Windows\Minidump\110714-44912-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x5996A0)
Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Friday, November 7, 2014 22:01:49 this computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug control description: this bug check indicates that a system thread threw an exception that the error handler did not.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Friday, November 7, 2014 18:29:29 GMT crashed your computer
crash dump file: C:\Windows\Minidump\110714-17737-01.dmp
This was probably caused by the following module: athrx.sys (athrx + 0x1C4F76)
Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF88005E67F76, 0xFFFFF880035A7438, 0xFFFFF880035A6C90)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\athrx.sys
product: Atheros CB42/CB43/MB42/MB43 network card driver
company: Atheros Communications, Inc.
Description: Atheros Extensible wireless device driver
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

Friday, November 7, 2014 18:27:43 GMT crashed your computer
crash dump file: C:\Windows\Minidump\110714-14570-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag + 0x1421E5)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88005B4A1E5, 0xFFFFF88003E795E0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon Family
company: ATI Technologies Inc.
Description: ATI Radeon driver in Kernel Mode
Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
Google search: ATI Technologies Inc. SYSTEM_SERVICE_EXCEPTION

Friday, November 7, 2014 6:26:57 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\110714-15194-01.dmp
This was probably caused by the following module: atikmdag.sys (0xFFFFF88005B20B5B)
Verification of error code: 0 x 50 (0x0, 0xFFFFF88005B20B5B, 0xFFFFF8A0024CF000, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon Family
company: ATI Technologies Inc.
Description: ATI Radeon driver in Kernel Mode
Bug control description: This indicates that invalid system memory was referenced.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
Google search: ATI Technologies Inc. PAGE_FAULT_IN_NONPAGED_AREA

Friday, November 7, 2014 17:57:41 CEST your computer crashed
crash dump file: C:\Windows\Minidump\110714-49280-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag + 0x899D90)
Bugcheck code: 0xBE (0x12F9A6860, 0xFFFFF880035BC560, 0xFFFFF880062ACD90, 0xE)
Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon Family
company: ATI Technologies Inc.
Description: ATI Radeon driver in Kernel Mode
Bug control description: sounds if a driver attempts to write to a memory segment read-only.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
Google search: ATI Technologies Inc. ATTEMPTED_WRITE_TO_READONLY_MEMORY

Friday, November 7, 2014 17:55:49 this computer crashed
crash dump file: C:\Windows\Minidump\110714-16692-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000395AA49, 0xFFFFF8800AB310C0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Saturday, November 1, 2014 8:24:12 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\110114-17550-01.dmp
This was probably caused by the following module: rdyboost.sys (rdyboost + 0x2C476)
Bug check code: 0x1000007E (0x0, 0xFFFFF880035248B8, 0xFFFFFFFFC0000005, 0xFFFFF88003524110)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\rdyboost.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: driver for ReadyBoost
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

Saturday, November 1, 2014 8:22:52 CEST your computer crashed
crash dump file: C:\Windows\Minidump\110114-18142-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Wednesday, October 15, 2014 9:09:56 CEST your computer crashed
crash dump file: C:\Windows\Minidump\101514-50856-01.dmp
This was probably caused by the following module: athrx.sys (athrx + 0xF9D77)
Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880051BED77, 0xFFFFF880033A7708, 0xFFFFF880033A6F60)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\athrx.sys
product: Atheros CB42/CB43/MB42/MB43 network card driver
company: Atheros Communications, Inc.
Description: Atheros Extensible wireless device driver
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------

13 dumps were found and analysed. Only 10 are included in this report. 2 third party drivers have been identified to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

athrx.sys (Atheros Extensible, Atheros Communications, Inc. wireless device driver.)
atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.)

If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

Analysis of Dump 1Crash
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Dumps are enabled on your computer.

Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\101314-17004-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
Error: CID_HANDLE_DELETION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: this bug control appears very rarely.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheck + 0x0)
Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
Error: CID_HANDLE_DELETION
Bug control description: this bug control appears very rarely.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Monday, October 13, 2014 12:15:52 CEST your computer crashed
crash dump file: C:\Windows\Minidump\101314-17784-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x2EDF95)
Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003145F95, 0xFFFFF88004650448, 0xFFFFF8800464FCA0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Monday, October 13, 2014 11:09:34 AM GMT crashed your computer
crash dump file: C:\Windows\Minidump\101314-14320-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0xA (28, 0 x 2, 0 x 0 x 0, 0xFFFFF80002F21D80)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Monday, October 13, 2014 2:53:45 AM GMT crashed your computer
crash dump file: C:\Windows\Minidump\101314-46987-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x3B (0xC0000005, 0x0, 0x0, 0xFFFFF88002DA2910)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

Sunday, September 28, 2014 17:57:12 CEST your computer crashed
crash dump file: C:\Windows\Minidump\092814-16926-01.dmp
This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0xC0A1)
Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: DirectX Graphics MMS
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.
Google search: Microsoft Corporation KMODE_EXCEPTION_NOT_HANDLED

Monday, September 22, 2014 6:50:05 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\092214-42525-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x1A (0xFFFFF780C0000000, 0x1DEE, 0 x 5003, 0x420700003BD8)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that an error occurred serious memory management.
This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------

7 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

dxgmms1.sys (DirectX Graphics MMS, Microsoft Corporation)

If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

PC! PK

These two were related to the material. Specifically of the RAM. Please run memtest

Blue Screen Driver IRQL blue screen of death Windows 7 Ultimate edition and Windows Vista

original title: BSOD Driver IRQL blue screen of death Windows 7 ultimate and Windows Vista

I get the BSOD, and they are different every time.

I had originally Windows Vista on my pc (HP m8300f) and it worked fine for 3 years until last month, I started to have these BSOD.

So I thought a new clean install of Windows 7 Ultimate would solve the problem. Well, I was very happy to get the new operating system installed, but a few hours later that darn BSOD appeared and im now distraught.

What is my RAM? My drivers? My hard drives?

Computer IM but I'm certainly some type of technology. I have basic computer knowledge and that's all.

You can download minidump files and find the information system here in this zip file http://www.sendspace.com/file/mfx420

This issue is very very irritating and has ruined a lot of my work.

Well up to now (18 hours) my computer has not had the BSOD and what I did is that I removed 1 GB of ram for my motherboard. Their were two sticks of 512 MB. I took them both. Now, I have 2 GB of ram running in my system and had not had a BSOD or an error after you have done this.

What is the problem with my ram? I now have 2 sticks of RAM on my motherboard and both are 1 GB each stick. What is the mix n match that causes a problem all of a sudden? My computer came with this stock of installation. I also noticed the ram I got were the brand Samsung and the other on my motherboard are another brand.

Well idk I hope it was my problem. We'll see.

Equium P300-16 t - Windows error recovery screen

It started with not to connect to the internet and to say that something did not launch. I looked on the forum and he said press F8 chose the first option (to fix your computer), I did.

Then he took me to a with option 2 windows error recovery
-Launch Startup Repair (when press screen becomes black for 1 second, then goes back to the same screen)
-Start windown normally (when press turns the computer on and back on bringing me back to the same screen)

Now when I turn it on charges it takes me to the windows error recovery screen. And no matter what I push on I always end there.

Hope someone can be useful

Hello

Looks like something was wrong with the recovery process and now Windows may start t. Maybe something messed with the registry or a few important Windows files, so I think that the only option to get rid of it using the Toshiba recovery disc. It will wipe the entire HARD disk and restore the factory settings, normally it should work.

Just so enter the Toshiba Recovery disk and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings. :)

reformat and reinstall Windows XP but get the blue screen on the windows configuration page

I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer. How can I make this? I want to give this computer to my grandchildren.

Hello

1. why you try to reinstall Windows XP?

I suggest you to try the steps below and check if they help to resolve the issue.

Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.

a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.

b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.

c. do not choose the option to press R to use the Recovery Console.

d. in the Windows XP licensing agreement, press F8 to accept the license agreement.

e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

f. follow the instructions on the screen to complete the installation.

See the following link for more details on the repair facility:

How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed

http://support.Microsoft.com/kb/978788

Hope this information is useful.

ERROR on SCREEN BLUE - DRIVER_IRQL_NOT_LESS_OR_EQUAL (Windows 7)

Similar Questions

Maybe you are looking for