How to defragment the drive? He said that it is planned.

Similar Questions

• How to defragment the drive d error: some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.

  Original title: how to defragment the d drive

  Defragmentation is complete for: (c :)) some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.   I solve this problem with pagedefrag but same problem with the D: drive. What can I do? is a D: disk defragmentation program at system startup? Please help me :(

  Its a simple but problem ongoing with the pagefile... The hd is in use & cannot defragment parts of it

  because of this, use to defrag times. To fix the files fragmented on any hard drive, open the system

  Properties, performance, advance, the page file, change the button, select the hd, press "no paging file" value

  Enter 2 X, close, restart the pc. Once in xp, open cmd, type: CLEANMGR then select the hd,

  type: Defrag D: D: being fragmented, once through, hd output cmd, return to system properties, set

  the swap file for hd to "let the system manage", click 2 x game, close, you get a couple of windows

  saying: 'replace the file' say Yes close... Sometimes you have to try several, but you will succeed...

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• Satellite Pro A60: How to replace the drive?

  Satellite Pro A60 replace DVD player - need repair
  Or does anyone know how to remove the drive of this laptop Bay

  Post edited by: chrielli

  Hello

  I think the disk replacement procedure is very similar to replacements on other laptops.
  To remove the STRANGE bay module follow these steps:

  1. turn the computer.
  2. remove the black binding screws.
  3 turn the computer over and open the display.
  4. push the module bay ODD.

  All that s. It s not achieved with a screw.

• Series HP Photosmart Prem C310: How to download the driver for Acer desktop computer

  I got my computer and I have a printer HP Photosmart Prem C310.  It works very well with my old laptop, but do not print with my new Acer desktop computer.  It is said that missing d driver and I need to download or use a disc to install it.  My computer does not have a place to insert the discs and whenever I try to download the driver it says that it can not be found.  All of the suggestions.  I can't print with my new computer to my old printer, even if the printer still works.

  pigletpsu

  Welcome to the Community Forum of HP.

  The Support Pages for the printer are apparently all in a tangle.  I can't, either.  Mutter, bang the mouse on the desktop...

  OK - that found replacing then you can install the full feature software.  The tire site it draws from HP.

  Make sure you take the download for PC and not for the Mac.  The smile.

  The download link is located below the list of operating systems...

  Software and drivers complete HP Photosmart Premium C310a

  As soon as the HP website is 'back', be sure go you back and grab a copy of your user's Guide.

  =========================================================

  Instructions for the installation and other pieces of interest - some will be useful when the Support site is returned:

  Install the full features software - printer

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• How to upgrade the driver for my video card?

  How to upgrade the driver for my video card?

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How to: install the driver for scanner "visioneer onetouch 8920 usb" diskless

  Original title: is there a way to get a "driver" for my scanner "visioneer onetouch 8920 usb", other than the dish that comes with it? (I have no disc drive for my netbook)

  I recently got a netbook, the Acer aspireone running windows 7 starter edition, I have a scanner, visioneer onetouch 8920 usb. the netbook I have has no disk drive, I plug the scanner and windows cannot load the driver.  I need help to find how to install the driver, so I can use this scanner.

  Driver download page (but the latest drivers for XP - they will probably not work):
  http://support.Visioneer.com/products/8900/downloads.asp

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in windows 7.

  More information on how to make older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• It's been two months that I downloaded photoshop cs6 and it was fine, but now when I try to open the program, he said that I have to uninstall. When I go to the control panel and click on uninstall, so I can install it again, it just says: I need to clean

  It's been two months that I downloaded photoshop cs6 and it was fine, but now when I try to open the program, he said that I have to uninstall. When I go to the control panel and click on uninstall, so I can install it again, it just says: I need to clean my computer or restart, because it can not uninstall the program. I already did and it is still not uninstall. How should I proceed?

  run the cleaner, the use of the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  and then reinstall it.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Can I use on my Mac Mini 10.8 mid-2007 4 GB? The guy at the apple store said that it would crash

  Can I use on my mac mini 10.8 mid-2007 4 GB? The guy at the apple store said that I shouldn't exceed 10.7.5 (Lion), but that will not be taken in charge by google chrome

  10.7.5 is the highest that can go a 2007 Mini.

• How to install the driver for Intel HD on Satellite C660-22V

  Hello

  I couldn't answered below so here's my question.
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68240

  As * I don't know if you work for toshiba but what else am I supposed to do if the driver is installed on a new laptop does not allow me to use my software?

  The software is ArcGIS and would be widely used.

  Looks like it's been 2 years since the driver was updated by Toshiba so what is that?
  I expect the laptop to work out of the box, given that the specifications meet the system requirements for the software.

  Will there be an update in the future?

  Hello

  This seems to be a user to user forum so don't expect to get answers from Toshiba here

  > Looks like it's been 2 years since the driver was updated by Toshiba then what is that?
  > I would expect the laptop to work out of the box, given that the specifications meet the system requirements for the software.

  Where a problem? Satellite C660-22V supports Intel graphics cards.
  Visit the Intel page to get the latest graphics driver.

  If you would not be able to install this using the install.exe, go to the Device Manager and install/update the driver via Device Manager graphics card
  Use the option of advanced installation so that it points toward the driver's record that contains the latest driver files that s

• How to reinstall the driver hotkey Qosmio F20-149?

  I had the problem of "THotkey. -0 x 00031402, 0 x 00000002 code. So, I did the respective driver download but now, if I want to launch the program Tfnf5
  nothing starts.
  Can someone give me it please tip how to get the driver reinstalled?

  Fraetzi

  First of all, you should try to refresh o (restore) the common modules!
  Then remove the Hotkey utilities for display add it & remove features in the control panel software. Reboot the laptop and install this app again.

• The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server?

  I am running Windows 7 Pro 64-bit in a dish netwrok with no announcement. I can map drives on the server without any problems and everything seems fine. Then after a few hours it seems to lose the mapping on the drive. There are two mapping drives and he loses a. It will show in my computer as being mapped, but you cannot access it. You can connect to the mapped drive on bringing the command run and typing in the UNC path in.

  The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server? Once you tell to remap things in car are fine for a few hours.

  My question is where and why it does this?

  Thoughts?

  Thank you

  Tom

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Hope this information is useful.

• Windows 7 on Dell Inspiron 545. Impossible to delete backup files from the drive d. careful that the disk is full.

  Constipated D drive.
  Warnings this drive D (backup) is complete.
  Tried to erase the contents of the disc without success.
  D drive shows a big red line...

  IMMEDIATELY STOP using the D drive and for the backup. The D drive is your recovery partition which is used to return your computer to the factory door specifications - IE to re - install Windows.

  Please get in touch with Dell to find out how to return the drive to its original state recovery.

• How to make the color of ScrollBar that are created using the css code is displayed in Windows 8

  I wish I could understand how to get the color of ScrollBar that are created using the css code appears on my web design theme games. But I can't see them in Windows 8. Is there something that I need to enable to see colorful scroll bars? I'm used to be able to see them on my Windows XP computer. It is important for me because a lot of people like models with colorful scroll bars.

  Open the Tools menu and turn on "Compatibility view" to do.  Note that this works only in the desktop version of Microsoft Internet Explorer.