How to determine if the AHCI or IDE is in use.

Similar Questions

• HP DX2000 MT, how to change the AHCI to IDE in the BIOS?

  I tried 4 work HARD drive on this machine reloading XP but when I get to the installation, is to show the problem of partitioning in the images below and I can't delete the partitions so I like to check the new BIIOS and I need to change the AHCI to IDE but how do I do this please? I'm not finding anything on the net to change it in the BIOS and looking in the BIOS for this I don't see anything?

  Hello:

  Your model is too old to have the AHCI support.

  There is no setting in the BIOS to change.

  You can try some free software like partition wizard and use it to make a single partition.

  http://www.partitionwizard.com/free-partition-manager.html

• How can I activate the AHCI on a Studio 540?

  Hello I recently upgraded my pc to an OCZ Vertex 3 240 GB ssd hard drive and moved my old HDD as a secondary for the storage of music, pictures and video files. I read that using the SSD in AHCI mode will further improve the performance of the disk. My question is how can I activate the AHCI in bios dell. the only im options given are SATA and RAID. Is it possible to run AHCI? Any help is appreciated. I have better than average knowledge with pc, s but far from an expert. Thank you

  Care Syatem

  Core 2 quad 8200 processor 2.3 ghz

  8 GB DDR2

  PNY geforce 560ti

  Agility 3 OCZ 240 GB primary

  WD caviar black 640 GB secondary

  Corsair 600w ch

  Windows 7 64 bit

  If your bios allows, you can find passage to the raid (even if you have only a single boot drive) can put you in ahci mode. Before making the change in the bios, you will have to do some registry tweaks like just change the bios setting you will get a bsod when you start.

  To enable switching between RAID/AHCI/IDE mode, you will need to change the values 'Start' in these key 0

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide\Start

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV\Start

  Once you make these changes, restart and set AHCI/raid in BIOS, save the changes and then restart.

• How to determine whether the current operating system is windows, or MAC?

  How to determine whether the current operating system is windows, or MAC?

  CSparrow wrote:

  operatingSystem var = $.getenv ("OS");

  operatingSystem = operatingSystem.toString ();

  alert (operatingSystem);

  It gives me Windows NT Windows 10

  With the help of:

  alert($.os);
  

  works for me.

  (result: Windows/64 10.0)

  and the Silly-V code

  Folder.FS

  gives you the name of the operating system

• the activation server determined that the specified product key cannot be used to 0xC004C008

  Hello

  I'm running a server KMS on Windows server 2012 R2 and I have enabled more than 300 PC and servers.

  But for some reason, can no longer trigger the new PCs and servers. They get 0xc004c008 the activation server determined that the specified product key cannot be used.

  Nothing has changed on the KMS server and I do not see where the KMS host key could be used outside of the host itself.

  All ideas

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I add the speaker notes to a slide using applescript?

  How can I add the speaker notes to a slide using applescript? I am able to create slides, add a title and bullet points, but when I try to add the speaker notes, it does not work.

  say thisSlide

  -set the title

  set the text of the object to the default title at "TITLE" element

  -create a bulleted list

  the text of the object of the item to the default body ¬

  "Bullet Point 1" & return & "Bullet Point 2" & return & "Bullet Point 3"»»

  -put the presenter notes

  ¬ the text value of the object of the presenter notes

  '' Here is my presenter notes.

  How can I add the speaker notes to a slide using applescript?

  Maybe like this:

  say thisSlide

  -put the presenter notes

  Set presenter notes to "here is my presenter notes.

  end say

• How can I get the amount of free disk space using the space using windows 7 Please share example using GetDiskSpace

  How can I get the amount of disk space by using windows 7 Please share example using GetDiskSpace I already studied http://digital.ni.com/public.nsf/allkb/9958B8E473C4EF1786256BBC0053B64F

  Reading your question a little more in detail, I doubt if you are using the Win32 GetDiskFreeSpace API function (including my previous post is the solution) of the function GetDiskSpace from the Toolbox of the programmer.

  With respect to the other, it works even with capacity greater than 2 GB disks, but you must use the appropriate formatting code to display the returned value. I updated my example to display the total of free space in the debug output window and added a comparison with the value of 3 GB using UInt64TypeCompareUInt box to tools programming interface.

• How can I prevent the access denied message when you use the shutdown command?

  I use shutdown /m \\computername/s

  I have "Access denied (5)" as an answer.
  I am admin on all my computers. Same username and password on each of them.
  How can I get this shutdown command to work remotely, so I can't access every computer command prompt via Remote Desktop?
  How can I prevent the access denied message when you use the shutdown command?

  Hello

  I suggest you to report this issue in TechNet Forums for Windows 7 networks: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• The activation server determined that the specified product key cannot be used.

  (windows 7 Professional) product key, I get from MSDN, through my college
  the key has been used first in my office and I've activated, it
  later, I formatted my desktop computer and install w7 in my laptop with the above product key
  so I find the product key will be impossible to activate windows

  Here are the details of the error:
  ---------------------------
  Error details
  ---------------------------
  The following information was found for this error:

  Code:

  0xC004C008

  Description:

  The activation server determined that the specified product key cannot be used.

  ---------------------------
  Ok
  ---------------------------

  pls help >
  THX in advance

  Hello

  Since you have already activated this product key, the server displays the key as being in use. Simply call the Activation Center and activate manually settle.

  1. press the Windows Logo key + R. This will bring up the run dialog box.

  2. in the Open: box, type slui 4 and press OK. This starts the manual activation wizard.

  3 select your country from the drop down and click Next.

  4. the wizard displays a toll-free telephone number. Leave the wizard open on the computer and call this phone number.

  You will receive a few saved options. Select the option to speak to a representative.

  The representative will manually activate this system for you.

  Let us know if you mhave more problems

  Ronnie Vernon MVP

• How do you install the creative cloud on several computers using the same license?

  How do you install the creative cloud on several computers using the same license?

  Installation on multiple computers can be done independently of the subscription.  You only need the lic3ense when it comes to activation, you have two active facilities (signed in).  Just install the desktop application and use it to install the applications, and then connect to activate.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation
  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• How do to identify the documents called "models of library" using the RESTful API?

  How do to identify the documents called "models of library" using the RESTful API? Furthermore, what constitutes a document to be a "model of library"? I see nothing in the libraryDocuments RESTful documentation that describes this type of document, such as presented on the tab 'Manage' my developer account. Please see the screenshot below. There is a model of Document named "[DEMO ONLY] Test model" listed under "Library Templates" and I try to figure out which classifies that document to be included this way and how does produce a similar announcement by using the RESTful API.

  

  Thank you!

  Hello

  You can connect to access library models using the REST API, use 'GET /libraryDocuments' allowing to recover documents in library for a user. Models are created in the account of EchoSign, which later are accessible via the REST method mentioned above.

  Jat

• HP Envy 1540T H8: How can I activate the AHCI?

  I installed a new Pro 850 Samsung 1 TB SSD drive which replaced a Samsung 256 GB SSD.  However, I am unable to get the computer to start with I select AHCI mode in the BIOS of the reader.   I can only boot into RAID mode and magician then tells me to activate the AHCI for optimal performance.

  The following system information is provided:

  OS: Windows 8.1 64bits

  Chipset: Intel (R) C600/X 79 series chipset controller LPC - 1 41

  Storage controllers: Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller 12.8.2.1000

  RAM: 32 GB

  Does anyone have any suggestions on how to proceed?  Thanks in advance for your help.

  Mr President.

  Thank you very much!.  I tried to solve this problem for days.  I had already installed a new copy of Windows 8.1, so I've been worreid I need to start over, but I do not have.  All I had to do was follow you to start in safe mode.   I then rebooted in UEFI, changed the RAID on AHCI and disabled Secure Boot.  The system then finished the re-boot and is in AHCI mode.  I have not lost all data on my three internal drives (1 SSD and 2 hard drives).  For some reason, he did reformat a NAS attached, but I don't have something out there that was not saved.

  I really apprecitae your help!

  All the best,

  John

• How to determine that the user has purchased an article or not?

  Hello

  Can someone tell me how can I determine if the user has purchased an article or not?

  Until now, I add to the cart and then allow user to pay for this item through Paypal. But now, my goal is to show all these items that the user has already added, but not bought yet.so, whenever user logs in a/c, he can see the item in my cart.

  Please... help me

  This sounds like a question of PayPal, then you will want to check these forums. If you were using in-app purchases of BB, so yes, it has an API to check the previous in-app purchases.

• How to determine if the rank of the acquired list focus?

  Hi all

  I have ListField with custom reminder.

  When the user change focus by the movement of the navigation, drawListRow() is called several times - for each focus-changed event.

  How can I determine in the method drawListRow() if current rank on the FOCUS_GAINED event?

  I can do that by following the path:

  public void focusChanged( Field field, int eventType )    {        mIsFocusGained = false;
  
          if( eventType == FOCUS_GAINED )        {            mIsFocusGained = true;        }    }
  
   public void drawListRow( ListField listField, Graphics graphics, int index, int y, int width )    {        int rowHeight = listField.getRowHeight();        int selectedIndex = getSelectedIndex();
  
          if( index == selectedIndex && mIsFocusGained )        {            drawHighlightRegion( graphics, HIGHLIGHT_FOCUS, true, 0, y, width, rowHeight );        }---------
  

  But I can do that directly in drawListRow()?

  Thank you

  I expected allows you to change your listener to update as follows:

  if ( eventType == FOCUS_GAINED )
  {
  mIsFocusGained = true;
  }
  else
  if ( eventType == FOCUS_LOST )
  {
  mIsFocusGained = false;
  }
  

  I think you should ignore FOCUS_CHANGED because the listField stil keep focus in these events.

  I'm not clear on what you mean by that:

  "is that a function is to determine/get current theme ceremony?

  I thought you did that with your FocusChange listener?

• How to determine if the layers overlap?

  I am trying to find a way to determine if the different layers have pixels that overlap.  The layers are formed at random and need to fit as closely as possible, so using the limits to check the overlap would not work.  I'm basically looking for a way to detect duplication based on pixels that are 100% opac.  Is there an easy way to do this in a script?

  I had some free time at work so here is my implementation, only problem I do not know how to remove the "no dialogue selected pixels.

  Alert (checkOverlapping ());

  function checkOverlapping()

  {

  var selectedLayers = getSelectedLayersIdx();

  If (selectedLayers.length! = 2) {alert ("Please select the two layers you want to check"); return null ;}}

  makeActiveByIndex(selectedLayers[0]);

  selectActivePixels();

  makeActiveByIndex(selectedLayers[1]);

  intersectActivePixels();

  activeDocument.quickMaskMode = true;

  activeDocument.activeLayer.threshold (128);

  activeDocument.quickMaskMode = false;

  Try

  {

  activeDocument.selection.bounds;

  }

  catch (e)

  {

  return false

  }

  activeDocument.selection.deselect ();

  Returns true;

  }

  function cID (inVal) {return charIDToTypeID (inVal) ;}

  function of the sID (inVal) {return stringIDToTypeID (inVal) ;}

  function selectActivePixels()

  {

  var desc15 = new ActionDescriptor();

  var ref8 = new ActionReference();

  Ref8.putProperty (cID ('channel'), cID ("FSC"));

  desc15.putReference (cID ("null"), ref8);

  var ref9 = new ActionReference();

  Ref9.putEnumerated (cID ('channel'), cID ('channel'), cID ("TN"));

  desc15.putReference (cID ("T"), ref9);

  executeAction (cID ("setd"), desc15, DialogModes.NO);

  }

  function intersectActivePixels()

  {

  var desc18 = new ActionDescriptor();

  var ref13 = new ActionReference();

  ref13.putEnumerated (cID ('channel'), cID ('channel'), cID ("TN"));

  desc18.putReference (ref13 ("null"), cID);

  var ref14 = new ActionReference();

  ref14.putProperty (cID ('channel'), cID ("FSC"));

  desc18.putReference (cID ("with"), ref14);

  executeAction (cID ("Introduction"), desc18, DialogModes.NO);

  }

  function makeActiveByIndex (idx) {}

  var / / desc = new ActionDescriptor();

  Var ref = new ActionReference();

  ref.putIndex (cID ("Lyr"), idx)

  desc.putReference (cID ("null"), ref);

  desc.putBoolean (cID ("MKV"), true);

  executeAction (cID ("TPCV"), desc, DialogModes.NO);

  };

  function getSelectedLayersIdx() {}

  var selectedLayers = new Array;

  Var ref = new ActionReference();

  ref.putEnumerated (cID ("Dcmn"), cID ("Ordn"), cID ("Trgt"));

  var / / desc = executeActionGet (ref);

  If (desc.hasKey (sID ("targetLayers"))) {}

  DESC = desc.getList (sID ("targetLayers"));

  var c = desc.count

  var selectedLayers = new Array();

  for (var i = 0; i)<>

  try {}

  activeDocument.backgroundLayer;

  selectedLayers.push (desc.getReference (i). getIndex());

  } catch (e) {}

  selectedLayers.push (desc.getReference, (i), .getIndex () + 1);

  }

  }

  } else {}

  Var ref = new ActionReference();

  ref.putProperty (cID ("Rprp"), cID ("ItmI'));

  ref.putEnumerated (cID ("Lyr"), cID ("Ordn"), cID ("Trgt"));

  try {}

  activeDocument.backgroundLayer;

  selectedLayers.push (executeActionGet (Ref), .getInteger (cID ("ItmI"))-1);

  } catch (e) {}

  selectedLayers.push (executeActionGet (Ref) .getInteger (cID ("ItmI")));

  }

  var vis = app.activeDocument.activeLayer.visible;

  if(vis == true) app.activeDocument.activeLayer.visible = false;

  var desc9 = new ActionDescriptor();

  var list9 = new ActionList();

  var ref9 = new ActionReference();

  Ref9.putEnumerated (cID ('Lyr'), cID ('Ordn'), cID ('Trgt'));

  list9.putReference (ref9);

  desc9.putList (cID ('null'), list9);

  executeAction (cID ("'Shw"), desc9, DialogModes.NO);

  if(App.activeDocument.activeLayer.Visible == false) selectedLayers.shift ();

  app.activeDocument.activeLayer.visible = live;

  }

  Return selectedLayers;

  };