How to do a full system upward on XP?

How to do a full system back up to an external hard drive on Windows XP

Please follow the Microsoft Help Page:

http://www.Microsoft.com/windowsxp/using/Setup/maintain/backupFiles.mspx

Tags: Windows

Similar Questions

  • Equium - how to do a full system recovery?

    Hi there just wondering if someone could help me.

    My brother-in-law as tried to install norton and he hurts and turned off the coast of the laptop by pressing the off button. When he started it back up it comes with a blue screen that says a problem has been detected and windows has shut down to prevent damage to the computer

    I tried to press f8 to perform a full recovery of the system but with Windows does not, I can't use this form.

    Can someone help me please?

    Hi andywood,

    What exactly happens if you press the F8 key? You can access the Windows Advanced Boot menu?
    If yes you can start Windows in safe mode?

    Normally, you can start the recovery of HARD drive if you access the advanced boot menu and select Repair my computer or read you it:
    http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

    Alternative use the Toshiba Recovery disk to restore Windows.

    By the way: what satellite notebook you have exactly?

  • How to recover programs and files that have been written too by a full system restore?

    Original title: data recovery

    Is there a program that will allow me to recover programs and files that have been written too by a full system restore?  I had to do a complete system restore, because the computer has been locked up in a start of the closed loop cycle.

    Hi Apmech9,

    1. don't you restore the computer to factory settings?
    2. do you just restore the computer to an earlier time by using the system restore feature in Windows XP?

    If you restore the computer to its factory settings, you will then get in touch with the manufacturer of the system for more support options.

    If you had just restored the computer to an earlier time using System Restore, you can undo the system restore to revert back the changes.
    See the article "How to undo a restoration of the system after performing a system restore" in this article of the

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to remove a Trojan horse, full system scan detectected Essentials: Rougue.Win32/winweb

    I have Win. Vista, 32-bit & very limited computer. My MS Essentials full system scan detectected: Rougue.Win32/winweb. Catagory: Trojan, Alert: serious, recommended Action: Remove. In Histrory , he shows the action is: ADMITTED.  Why is this? How can I remove this?

    Hello

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • How to download adobe software full cc and even how to use 20 installation systems

    How to download adobe software full cc and even how to use 20 installation systems.

    Hello

    You can follow this article which will guide you how to download creative cloud applications.

    Download and install Adobe Creative Cloud apps

    Concerning

    Gilles marneffe

  • How to restore a full backup of the Server 2008 system that has been stored on a BitLocker Drive encrypted?

    I have a requirement to encrypt my server for transport off-site backups, so I'll try to store my backups to an external drive that is encrypted for BitLocker.  I am doing a test restore to a new drive to simulate a full system recovery, but I'm unable to unlock the drive encrypted with the backup of the prompt under system recovery options.

    I have confirmed that I can unlock the drive from a command inside the original Windows installation prompt using manage - bde.wsf and the recoverypassword, but the same command does not work from the command prompt during the recovery process (started from the installation DVD).  There is no error code, a single message that the recovery key did not work and administrator privileges may be required.

    When you try the same command from another server when connected to that drive, I got an error that can be informative, code 0 x 80310037, implying that the recovery key may not because of the FIPS compatible algorithms that are needed.

    I'm looking for something that isn't possible trying to store the complete system on a BitLocker encypted disk backups?  Any help would be greatly appreciated.

    Thank you
    Jay

    http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

    Repost in the Forums 2008 Server at the address above.

    They will help.

    See you soon.

    Mick Murphy - Microsoft partner

  • full system restore

    I have the system recovery disc four HP and an extra drive (not sure the supplemental what). I need to do a full system restore. When I insert CD 1 of 4
    Need me just a screen with four folders; Preload Boot, EFI, hp, and files:
    bootmgi, bootmgi.efi, PreloadSize and SetInfo.
    I can't do anything with the disc so he could get it back?

    Registration of HP 120-1333w; Model name H3Z76AA; SER. NO. [edited by moderator serial number]; Recorded 16 FEB 13

    I tried immediately press it the ESC and F9 key.  Nothing works for a full recovery.

    I am one of those seniors, 75, people and not a computer expert, so be gentle.  I'd appreciate any help

    to resolve this issue.

    The additional disk is unimportant, unless the restoration process he asks.

    You have changed the boot order in the BIOS that the DVD starts first?

    Watch this video about how to perform a factory restore, you don't have to remove the graphics card:

    https://www.YouTube.com/watch?v=dFBWPmy32ms&index=2&list=PLnsZC48QebLpS0g2Ak-yHB6PnPV2PLkZq

  • Find files and etc after a race a full system restore.

    I had problems with my computer and I ran the "full system restore" (with backup). How to make the backup of files, etc. back to where they were? When I go to search and type something in this use to be on my computer, I see a file or several files that say MyBack and the file I'm looking for, but I do not know how to restore it back to where it originally was.

    hamntre,
    Thanks for posting.  It sounds like you have used the restore\backup OEM utility to restore the system.  If that is correct, then you will need to check with the manufacturer to learn how to restore your files from your PC.  If you used the backup utility built into XP you just run it again and follow the steps to restore your files. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • A lot of programs provided with computer went after full system recovery

    I had to do a full system recovery, but now, all types of factory programs are missing! For example, Microsoft Works and Office and many accessories such as games and calculator. Anyone know why this happened and how can I get these dos programs?

    My system is a HP Pavilion Entertainment PC with Windows Vista

    Thank you!

    Hello

    If you are having problems with software missing after using the recovery of manufacturers process contact the manufacturer

    It's their recovery process not microsofts

    Contact HP

    http://welcome.HP.com/country/us/en/contact_us.html

    or HP support froums

    http://h30434.www3.HP.com/

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • Sony Xperia Z5 Premium. How make for rotation full screen. Screen and menus.

    Hello. I have new premium of z5. I want to know how to get a full rotation in 5.1.1 android
    I have the rotation in chrome and the rest of the applications, but the main screen with apps does not run with my activity. also the lock screen does not rotate. then, feeling very unconfortable using the mouse and keyboard wireless BkB10.
    I would use view portrait throughout the system, when I need it.
    Help, please.

    @Gurri4ran

    There is no way to do this with launcher Sony Home, you will need a third-party application, he asked before, do not forget to send your comments to Sony

    Local support

  • If I install thisWindows 7 Ultimate SP1 64 bit $Full$ System Builder Pack 1 DVD will be it wipe everything that I installed in my computer

    Already, I am running windows 7 Professional if I install thisWindows 7 Ultimate SP1 64-bit (Full) System Builder DVD 1 Pack will wipe everything I installed in my computer?

    Yes, you can install customized versions of Windows 7 OEM.

    Backup before attempting to install it:

    http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

    http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  • Can someone tell me how to upgrade the operating system on the MacPro?

    I have a MacPro1.1 which works fine, but now I can't use LightroomCC on that because the OS is no longer supported. Can someone tell me how to upgrade the operating system on the MacPro?

    Your Mac Pro 2006 supports only as high as Lion unless you use a hack.

    If you want Lion then order a code to download here:

    http://store.Apple.com/us/product/D6106Z/A/OS-x-lion

    and then use the code in the Mac App Store.

    If you need higher that the Lion then Google for the hack

  • How to disable remember password pop upward

    When I go to 'Tools', there is no "option" menu. How to disable remember password pop upward. I have "Firefox 11.0 Mozilla Firefox for Ubuntu canonical - 1.0" and "Ubuntu 10.04 LTS - the Lucid Lynx.

    I could say that more clearly: Linux and Mac, the dialog box is called preferences; It is only called Options under Windows.

    Go to the Security tab allows you to disable the registration of passwords.

  • I have a mac pro 3.1. How can I transfer the system to a new and bigger drive?

    I have a mac pro 3.1. How can I transfer the system to a new and bigger drive? The old drive is much too small.

    I'm not familiar with your model computer, but there are several ways to do so.  If the computer can accommodate multiple disks, you can install the new drive next to the former.  If she does not accept another disk, you can in these external adapters for about $30, which allow you to attach a bare drive to a computer with USB.  Then, you clone the internal drive to the new. Cloning is a special form of the copy.  It copies all files including startup system files so that your new drive is essentially identical to the first.

    Double clone - http://www.bombich.com/software/ccc.html

    SuperDuper - http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html (shareware)

    IBackup - http://www.grapefruit.ch/iBackup/index.html (free)

    The restore function of disk utility included in directions of OS X. alarm - http://discussions.apple.com/message/8799711#8799711 (a former post but can still work).

    Clone the old drive to the new, then install a new one.

  • Equium A200 - how to get the operating system?

    Hi, my son has just been given an A200 and we put in place a new disk hard in, but we do not have the recovery disks. Anyone know how I could get my hands on copies or how to download the operating system and then is just a matter of inserting the disc?

    Tony

    Hey Buddy,

    First of all I must say that it of not possible to download the operating system. It s just preinstalled on your laptop and you can find it on Toshiba Recovery disk as well.

    If you don t have a recovery disc, you can order one from Toshiba but I m not 100% sure if it of possible old Equium A200. Just check the online store:
    https://backupmedia.Toshiba.EU/landing.aspx

    If you can t order it, ask a service provider authorized in your country. Maybe they have such a disc and can give you.

Maybe you are looking for

  • 15 - ba016na: M.2, adding to 15-ba016na sata

    I just got hold of a 15-ba016na from Argos - everything is fine, but I would like to put a M2.sata in and move the operating system to hold the 2 TB for storage drive. Is it possible with this model. I did have the chance to open it but to check

  • Why to acquire her VI % 27s does not record correct samples % 2Fch

    Hi all Not an important issue right now, but interested if anyone knows why. LV2011 using full development and work with the base acquire its VI.  Its very strange, but I put the sampling to tell 48000 Hz and samples/ch 96000 frequency assuming I'd g

  • BIOS password lockout

  • How can I get rid of the message at startup?

    I'm trying to help my mother with her computer. Whenever she starts her computer, she gets this message: C:\Users\...\AppData\Local\DfrgMousecdrom\d3dobjpnp.dll - the specified module could not be found Any suggestions as to get rid of this? It does

  • "Please select the operating system to start" when I don't have one

    I run Windows 7 64 bit.  I have no other operating system installed, and I have never, other than the XP "virtual PC" option of Windows 7.  I suddenly started getting the "Choose the operating system to start" screen when I turn on my PC.  Windows 7