How to do the hard reset on Toshiba Journ.E Touch?

Similar Questions

• Equium - how to replace the HARD drive?

  Hello

  I need to replace the hard drive on my Toshiba Equium.
  Can someone tell me the procedure? I changed it once before, and I remember having to press one of the function keys when I turned on the laptop with the new hard drive installed.
  Should I have the recovery disk when the laptop is turned on with the new hard drive installed?

  Thank you very much

  Tim.

  Hey,.

  You should take a look in your user manual. Sometimes you will find a detailed how instruction replace the HARD disk, but it according to your laptop model.

  If you swapped the HARD drive, you need to reinstall Windows. Therefore, you can take the Toshiba Recovery disk that will restore the initial setup in a few minutes with all the drivers and tools. You only have to boot from that drive and that s all! :)

• How to do a Hard Reset on a HP laptop?

  Hard Reset allows you to solve problems of software and hardware

  This post looks at HP laptops.

   

  Hello, I will do a quick post on how to do a Hard Reset. A hard or forced Reset clears all the information in the memory of the computer which can restore the functionality. Reset your computer forces the system to erase and restore the software connections between the BIOS and hardware.

  Perform a hard or forced reset may fix the following:

  • Windows stops responding
  • Computer stops before Windows loads (no boot, a blinking cursor on a black screen, or errors related to the operating system not found or missing disk)
  • View suddenly turns off and remains empty
  • Software freezes
  • Keyboard unresponsive
  • The computer did not return from standby or sleep mode
  • An external device stops responding (turn off the power to the device in addition to perform the steps in this document)

  When you perform a hard reset, you must disconnect or remove all devices. You should start and test the computer itself and then reconnect a device at a time. To solve the high beginning or operational problem, you must run the wizard from the HP Support, or manually install the drivers all updated by Microsoft and HP.

  To perform a hard reset, use the following steps:

  To perform a hard reset, use the following steps:

  1. Turn off the computer.
  2. Remove the computer from the docking station or port replicator.
  3. Disconnect all external devices connected: displays of devices USB, printers, external storage, etc..
  4. Unplug the laptop AC adapter.
  5. Remove the battery from the compartment to batteries.
  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.
  7. Insert the battery and plug the power adapter into the laptop. but do not connect peripheral devices.
  8. Press the power button to turn on the computer.
  9. If a boot menu appears, use the arrow keys to select Start Windows normally , and then press the Enter key.
  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  Now, if your computer has a non-removable battery, these steps will not work. Instead, refer to use a Reset forced to solve Hardware and Software questions on laptop with a sealed Non removable b... .

  I hope that this solves any problem you can have that happen with your laptop.

  THX

  I hope it's useful.

  THX

• Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

  Hello

  I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

  Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
  help for me. If anyone knows how to solve this problem please answer me as soon as possible.

  Thank you for your time.

  Kind regards
  Nigel.

  Hello!

  What you downloaded exactly on the Toshiba site?

  As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

  An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

  Good bye

• How to clear the hard drive on my old iMac of 2008?

  I have a 2008 iMac I want to recycle. How to clear the hard drive?

  (What is PPC?)

  PPC stands for Power PC. Is the name used to refer to the old Macs that uses a Motorola processor instead of Intel chips used today. To clear your old Mac follow the advice in this document from Apple... What to do before you sell or give away your Mac - Apple Support

• Tecra A6 - how to remove the HARD drive password

  I am repairing a laptop Tecra A6 for one of my clients.
  For the first time, I fixed it for him, the hard drive was blocked from password and I had to reformat using an online service.

  This time, when I took my customer's computer everything he had put on his computer was the fingerscroll / password to connect to the account, there was no protection of password on hard disc tray.
  I brought it back to the shop, she booted up and immediately, I wonder a password to unlock the drive.
  Somehow, the hard drive has developed a password.

  (1) is there a possible problem with the hard drive?
  (2) at - it a solution without having to wipe the hard drive
  (3) Toshiba has tools or the default password that would unlock it

  The hard drive is a Toshiba MK6034GSX 80 GB.

  Any help please?

  Hello

  The HARD drive password can be removed ONLY if the old password would be known to you.
  If the HARD drive password is not known to you then you will not be able to delete
  In this case, the HARD drive is blocked and is no longer usable.

  Here's a little description:
  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm

  Welcome them

• Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

  This model encrypted?

  If this is not the case, how to destroy the hard drive? Where is the hard drive?

  Hi @Diane47,

  Thanks for joining the Forums of HP Support with your request to printer.

  I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

  HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

  You can clear the memory by restyoring the printer back to the default values.

  1. on the printer Panel, select Setup.

  2. from the Configuration menu, select Tools.

  3. on the Tools menu, select Restore Factory Defaults.

  HP offers to recycle their products for you. If you want to know more about it, please click here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Satellite P10 - how to change the HARD drive?

  Hello

  I want to change my Satellite P10 for a bigger HARD drive.
  But I Don t know how to remove the DvD drive.

  On this laptop, I mean that the HARD drive is under the DvD drive.

  Please help me, if you know how to change the HARD drive.

  Welcome them

  Mister_X

  Hi Frank,.

  I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

  The hard drive is fixed with 4 screws (2 on each side)

  HTH

• Satellite A30 - how to remove the hard drive

  Hi, new here...

  Can someone tell me how to remove the hard drive in my Tosh A30...

  Thank you
  captainp

  Hi Tim,.

  The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

  The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

  HTH

• How to perform a hard reset Hardware/Software problems

  Troubleshooting hardware and software with a Hard Reset

  Recently, I have been see a large number of issues that can be resolved, or at least try to be solved with a hard reset. A hard reset is one of the major steps in troubleshooting for a wide variety of issues. Issues such as a none responsive, computer keyboard do not start properly, software frozen, etc.

  Why a hard reset works:

  By performing a hard reset, you must remove all power from the computer. This will not occur when you restart or shut down the computer. Even by removing the battery briefly, there may be still some electricity stored in capacitors. When you do the hard reset it deletes the last drop of power from the computer. This clears all the RAM and basically force the computer to re-establish a connection between the BIOs and hardware. It will solve some problems wobbly a majority of the time, and therefore, why it is a great troubleshooting step base.

  If this does not resolve the problem, you are seen be sure to create a new thread and lists all the troubleshooting steps you have tried and also to give a detailed explanation on the issue that you are experiencing.

  Your friend of HP,
  Sean S

• Re: How to make a Hard Reset.

  Thanks for the help. The hard reset did not solve my problem.

  HP Deskjet F4280

  S/N {information}

  Thank you

  Roy.

  Makes me hungry.

  Can help to clean the contacts of the cartridge.  To do this, open the door and remove the ink cartridges.  When the door is open, remove the power cord at the back of the printer while the printer is on.  Follow the steps described in the following link.  Start at step 2  Prior to re - connect the power cord to the back of the printer, make sure that the other end of the power cord is plugged into a wall outlet (not a surge protector, power or battery backup).  Does that help?

• Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

  Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us?  I know its under the keyboard somehow, but I don't know how or where that open.  I could not find this model on YouTube either.

  Thanks in advance for your help.

  D.

  Hello:

  The only manual that I could find is one that covers the ze5600.

  See if it will work for your model too.

  http://h10032.www1.HP.com/CTG/manual/c00246219.PDF

• How to format the hard duct under XP?

  How to format the hard drive under XP?

  Hello

  You can format when reinstalling XP or installing another operating system process.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  See you soon.

• How to format the hard drive and do a clean install of XP?

  I have a legal windows XP profesional version to install and I need advice on how to format the hard disk, the version on it now was apparently a pirate vers.its years since I, did such things and my mind is old so I really need all the steps, a - z,.

  * How can original title - I wipe my hard drive and install win XP Prof? *

  Hi syynbbad,

  In addition to the post of cbarnhorst, please see the following article on how to do a clean install of XP:

  http://support.Microsoft.com/kb/978307

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to reformat the hard drive and do a "clean" install

  A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

  Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

  Thanks in advance

  Skip

  Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

  http://www.theeldergeek.com/disk_management.htm

  In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.