How to edit audio like video editing

Similar Questions

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• How to fix audio and video?

  Yes while watching a video (whether on Youtube, etc.) or a downloaded in Quicktime video format will stop after a minute and the buffer or simply freeze (Note: though it has already loaded or is already on my hard drive!), will be so audio. After 15 seconds the sound plays and the video remains frozen.

  Same thing while listening to music (Spotify or Itunes (both downloaded)), the music will stop randomly. After a few seconds, the music will continue with a whistling noise that fades in 5 seconds approximately.

  It started a month ago, and since then, I have tried several things:

  Reinstallation of Flash

  Update of Flash and any other update like OSx

  My mac to a timemachine image backup

  tried several different browsers

  tried several different wireless LANs (although Itunes etc. do not need those)

  has ran a Virus Scan

  Nothing has done so far. I don't know what to try anymore.

  
  

  So my question is:

  
  

  This who can I try to fix this? How can I go to find out if it is a hardware problem? Could a factory reset fix, and not not not using a backup, but simply install new OSX?
  

  
  

  
  

  Mac Book retina 2014 Version 10.11.2 El Capitan

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Try running diagnostics by following the instructions on the link below and let us know the results.

  OS X Yosemite: use the Diagnostics of Apple or Apple Hardware Test

  I hope you find this information useful.

  Best regards

  Austin

• How to make audio and video playback at the same time in movie maker?

  I've done some films with a flip camera and edited with Movie Maker.  However, when I played movies the sound does not match the video.  The sound was going faster.  How to synchronize the two together?

  Try to download windows media encoder 9 series, microsoft, download utilities

  also... Once installed, open it, select "convert video", change how data

  is to convert, convert a folder that you have created.

• How to capture audio only video or only when you import images from the camera

  When capturing video from a camera with a firewire cable the encoding screen does not give me the possibility to encode the video alone or only audio, I have to encode them both together. Ive used previous versions of first and he always gave me the option to encode only one. I can not even see the option to separate them, but the system I cannot select this option. Sometimes I just need to capture images, I don't need the audio, it feels like a waste of space. IM using first Pro CC. Thank you!

  Very well.  If you capture HDV I don't think you can separate the data stream.  I think you did during DV capture.

• How to apply audio and video transitions automatically when drop several clips to the timeline?

  If I remember OK, in first previos versions, it was possible to drag multiple Clips in the project area to the timelineand apply automatically audio/video transitions.

  It is possible to configure how many video images will overlap to a default value of transitions (and for audio, too).

  Is this possible in first CS6 to do the same thing?  Leave me a link to the documentation or a hint, how to get this thing done.

  I searched the documentation, but I have not found.

  Thanks for the tips.

  I believe that the function you are referring is automate to sequence. In CS6, it is in the project Menu. for those who use the CC, it's in the Clip Menu.

• How to extract audio from video

  Hello

  I want to extract the audio content in a video. So I open it and I try to export to aiff. Unfortunely QuickTime falls into a trap and I have to use 'The Force to quit'.

  Thank you for your help...

  Sorry! I managed to do the same thing with quicktime player!

  So far, my $ 35 invested for any purpose :-(

• How to download the youtube videos with downallthem add on as there are so many downloadable

  When I use downthem all, there are many jpeg, watch, containing the link of downloadale in the youtube pages appear. How to download audio and video of the selected link using this add on. It seems to be a good add on but I think he's said little about downloading audio and video.

  Sorry, I do not use this extension myself. You will need to wait for a support of assistance that uses actually the extension of aid.

• How to edit a video DVD?

  I have 120 minutes on a single DVD-video that I would like to change in order to

  create 10 minutes of video. Can anyone suggest the best way to accomplish

  This?

  I probably should have indicated the files were copied and saved to my desktop. These are ts files.

  When I copied the files to a DVD it split into two files.

  VIDEO_TS and audio_ts called another. They are both of a single DVD. Do you know why creates two folders on the same DVD?

  I guess what I'm wondering really is what free video editing software is the easiest to use?

  ===========================================
  The. On a DVD VOB files contain Audio and video.

  Try to import the. File VOB in Movie Maker for editing.

  Sharing video and Audio - Windows Live Movie Maker
  http://www.YouTube.com/watch?v=jvsRKz2peOg

  If it doesn't matter... try to rename the file. MPG and
  see if it will be important.

  Always without success... try of comverting the. VOB file to the
  . WMV format. The following freeware could be useful
  a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake has also options for cutting it and joining the
  Video:

  Freemake - how to cut video quickly

  http://www.Freemake.com/how_to/how_to_cut_video_quickly

  Freemake - how to join videos into one

  http://www.Freemake.com/how_to/how_to_join_videos_into_one

• Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  I'm glad you found the solution in one of my suggestions, Jon. Please mark this question as answered. Thank you!

• How to edit images like this?

  I wonder how to edit photos so that they appear as the Prom Dresses on http://wagworld.co.uk?

  I want to know how to edit the image to remove the dummy?

  Thanks for your help!

  Hello

  There are several ways to achieve this effect, which involve cutting out the dress in the background.

  To select the dress, I recommend playing with the quick selection tool (see below), to select the area of the dress.

  

  An alternative is to draw around the edge of the dress with the pen tool. Once you have drawn around the dress, right click and click 'make selection '. The pen tool give you more control over the area of selection than does the quick selection tool. For an excellent guide on learning the pen tool, see this used: http://psd.tutsplus.com/tutorials/tools-tips/photoshops-pen-tool-the-comprehensive-guide/

  

  Once you have chosen the dress, just hit cmd/Ctrl 'C' on your keyboard to copy and create a new layer (highlighted in blue below). On this new layer, press cmd/Ctrl 'V' on your keyboard to paste. You can now hide or delete the original layer of the photo, and there you go!

  

  For more detailed instructions, here's a fantastic guide by a professional photographer to the removal of the iin clothing pictures mennequins: http://blog.chrisbrock.co.uk/downloads/invisible_mannequin.pdf

  Good luck!

• How can I create a video clip with audio re-bound?

  Hey all,.

  I'm trying CS5 workflow for the first time since the original Premiere Pro...

  I have a lot of Canon EOS 5 d II sequences and audio recorded separately.  I'm bringing a timeline, their synchronization upward, throw the audio on the device and rebind the clip so now I have good video linked to the sound quality.

  Question:

  How can I now get this clip re-paired to the sandbox so I can use it for editing?

  In FCP I can just drag it to the sandbox... but if I do it here I'm getting the video originally on the audio device.

  Any advice would be appreciated... or any other advice on the general progress of it.  Thanks in advance.

  (I'm on a Mac, btw)

  First is not a way to create multiple elements - at least not in the way you're used to. However, what you can do, is use a sequence in another, as if he were a clip; in the nomenclature of the first, it's a "nested sequence.

  Probably the best thing to do is select the video and audio clips on a particular score that you want to synchronize and drag them to the icon of a new item in the project Panel. This will create a sequence corresponding to properties of your video and name identical to your video clip. It will also drop the audio and video clips in itself; You can synchronize the audio to the video here. Repeat this process for as many shots you have or need.

  Then simply use these sequences as if they were clips and edit them in a new sequence. You can drag them from the project Panel in the sequence, or the monitor Source for side panel, or Cmd/command and double-click it to load it in the Source monitor. Whatever it is, it must accomplish about what you are after and are the best that can be done with the functions available in first right now.

  EDIT: Also, if you have already synced up your clips in a sequence and did not want to go back, just select the component elements in your synchronization sequence and either right/Cmd click and select nest (or go to the sequence > nest). This will create the nested sequence and drop it in your bin, but you will have to manually name to keep track of what it is, because it will default to something like "Nested Sequence.05." The rest of the process is the same, however.

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• How to edit a previously created bookcover/photo/flyer?

  I want to know how to change a/photo/flyer bookcover that I already created and saved. I can't find a way to do it. I created a boolcover and saved it then closed off Photoshop cs6, now I don't know how to change the bookcover I created. I also want to know how to mix the elements with the background, so it does not seem out of place. I want this smooth glossy appearance. I can unlock the layer but may not know how to edit. I'm just learning how to use photoshop on my own yesterday.

  Thank you.

  Hi Shystet,

  If you want to keep editing a document created in Photoshop, you need to save it in a Photoshop Document (.psd). Looks like you might have registered as something else.

  I also recommend to start with a few video tutorials: https://helpx.adobe.com/creative-cloud/products.html#photoshop_slider

  This course learn Photoshop CC is very useful for getting started:

• How do I cut audio from video clips?

  HELP me ok so I video clips with audio in them. all I want to do is mute all the noise coming from the video so I can add something... Please is it possible?

  Hello

  You can use your favorite search engine to download and install third party video editing program to remove audio from video files and add audio you want.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.