How to educate the MCU conferences hosted on another MCU

Similar Questions

• How to manage the assets Conference on Telepresence server controlled by the conductor

  Colleagues, Hello.

  How to add additional participants to the already begun scheduled conference or permanent on Telepresence server controlled by the conductor? Or so... How to make the call to the Conference on the telepresence server controlled by a number of additional connected participants of the conductor?

  I do not know the TMS, but I do not see active conference control features in its options. On the telepresence server, there is limited management capacities.

  A driver controlled TelePresence server has no conference control what so ever, as its all managed by TMS. In TMS you use Conference Control Center under surveillance to manage the scheduled conference. Conference ad hoc permanent that's not demand through TMS, endpoints will have to deal in itself.

• How to extract the selected ESXi host user name and the password in the web client of vSphere?

  Hi all.

  I'm developing a plug-in for the web client to vsphere. I want to communicate with the selected host of ESXi in my Java Service Layer and who needs the host user name and password.

  I don't know how to search the Flex user interface layer.

  ESXi credentials are not stored in the user interface layer, you must use the vSphere SDK Web Service on the coast of java.  See vim.host.ConnectInfo.

• How to change the t0 ' topic: host ' search engine

  How to change the t0 ' subject: Home "search engine (for the moment it is yahoo), but I want to google. If I search from the address bar, then it is google. but I want to google on the home page for: (.) Thank you

  @cor-el: this would probably work if you want to restore the default value.

  I have changed my encrypted google search engine on "subject: House" with these steps:

  1. download sqlite browser.
  (I used this: website (sqlitebrowser.sourceforge.net) / victory of direct download)

  2 extract the zip file

  3. run ' SQLite Database Browser 2.0 b1.

  4. open the "chromeappsstore.sqlite" file in your profile folder

  5. click the Browse data tab and double-click the value in the first row. (see screenshot below)

  6. Insert the desired value.

  As you will see the values in the example below, you can use any search you want and you can insert a "_searchTerms_" instead of the term research.
  I have these values:

  • Standart (google):

  {'name': 'Google', "searchUrl" ': "_ http://www.google.com/search?q=_searchTerms & ie = utf - 8 & oe = utf-8 & aq = t & rls = org.mozilla: en - org.mozilla & client = firefox-a" "}

  • Encrypted Google:

  {'name': 'Google', "searchUrl" ': "https://encrypted.google.com/search?q=_searchTerms _" "}

  • Yahoo:

  {'name': 'Yahoo', "searchUrl" ': "http://search.yahoo.com/search?p=_searchTerms _" "}

  • Bing:

  {'name': 'Yahoo', "searchUrl" ': "http://www.bing.com/search?q=_searchTerms _" "}

• How to change the name of host server IMO?

  Hi, guru.

  Is it possible to change the name of host server IMO?

  Architecture:

  Server A - Oracle RDBMS

  Server B - IOM: admin, IOM, soa.

  Version of IOM - 11.1.2.1.0

  (If possible) it is necessary to change the server A server B in host names. During installation, the FQN to the server host names have been used.

  The procedure for changing the DB server host name is clear and simple. The question is on the server of the IOM.

  Unfortunately, I did find the documents that describe the process of change for the IOM system hostname. But fortunately the problem has been resolved.

  Shortly, the process is as follows:

  1. in my case: db oracle 11.2, wls 10.3.6, iam 11.1.2.1.0, soa 11.1.6. System - DB Server + server of IOM.

  2 VMS when copied to the new server.

  3. change the configuration files of MAC, IP, two servers.

  4. change the host name of the DB server. Restore the dbconsole EM repository (if used).

  5. change the IOM servers configuration with wlst listeners.

  6. change the source URL with wlst database IOM.

  7 remove the cache, tmp, newspapers of servers.

  8. replace all references to the old hostname with the new host name in the configuration files.

  9 start the administration server. Change in $DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/em/hsz5x1/META-INF/emoms.properties configuration file

  10. restart Admin, start managed servers.

  11 change DirectDB, OimFrontEndURL, BackOfficeURL, Rmiurl SOA Soapurl URL in MS (change management of the cycle of life-11 g Release 2 (11.1.2.1.0) management), urls detail task human workflow.

  12. check the application code for direct reference for host name, change.

• How to install the NIC to host runnign ESXi

  I had a HP DL380 ESXi, the server has 2 onboard NETWORK card, a recently whent down. We require that the server has at least 2 NIC

  I have a new NIC of Dlink gigabit which has the compatible drivers for Linx, I don't know how to install the hardware so that the ESXi can recognize it and use it

  Anny help would be appreciated.

  I know not at all compatible with ESXi Dlink network cards.  ESXi is not Linux - simply because the Linux drivers are available does not mean that you can use in ESXi.  You will need to check the VMware hardware compatibility list to see what supported chipsets, and you will need to know the chipset of this card.

  You can also view some websites ESX Whitebox to see if others have reported this card as working with ESXi.

• How to use the shutdown command to stop another computer?

  I just saw the setting-m to the shutdown command and decided to give it a whirl. However, when I pointed out the computer in question, I received a message that "a required privilege is not owned by the customer.

  What should I do to be able to use my laptop to turn off my old desktop computer? Both are running XP Professional SP3.
  Sometimes, I like reading or watching streaming video on Hulu on the laptop while lying in bed, and sometimes I play music if do the first, which is stored in the form of MP3 files on the desktop (which I access via a share). Be able to turn the office without getting up would be nice, but you do not get this option with Remote Desktop.

  Here is the result, the office is "slickswintel" (he's old, and since when I went first from Mac to Windows 98SE, although it is now a double XP/98) and the laptop is "slickslaptop".
  Both machines have unprivileged called 'Slick' on them local accounts that are my accounts on the day the main day. I have a different admin account, but I only use it as needed and use runas as often I log in fact.

  What should I do to get the following to work? In spite of the passing the MCSA Exam, I never learned about this feature, so I'm not sure what I should do to make it work? It'll work on a workgroup or is it only for domains? While I could set up a domain with the copy of the server I got from Dreamspark, I really didn't need one.

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  D:\Documents and Settings\Slick > shutdown /?
  Usage: shutdown [-I |-l | s | r-|-a] [-f] [m \\computername] [t xx] [-c 'c
  COMMENT'] [d up: XX: YY]

  No args display this message (same as to-?)
  -i Display GUI interface, must be the first option
  l log off (cannot be used with the - m option)
  s shut down the computer
  r Shutdown and restart the computer
  -an abandonment, a system shutdown
  -m \\computername Remote to cancel the shutdown/restart computer /.
  t xx Set timeout for shutdown to xx seconds
  -c 'comment' comment (maximum of 127 characters) stop
  Forces f - running applications to close without war
  Ning
  d [u] [p]: xx:yy reason for closing code
  u is the user code
  p is a planned shutdown code
  XX is the main reason (the positive integer code
  SS to 256)
  YY is the minor reason (the positive integer code
  SS to 65536)

  D:\Documents and Settings\Slick > stop s m \\slickswintel
  The operation completed successfully.
  A required privilege is not held by the client.

  D:\Documents and Settings\Slick >

  As a general rule, you must have administrative privileges on the remote computer to shut down this computer.  Given that both computers have XP Pro, you are halfway there (remote users always authenticate as 'Guest' on XP Home).  The computer that you are trying to close must have "Simple file sharing" disabled because otherwise you can not authenticate to this computer as anything except the user "guest".  So try to disable Simple file sharing, make sure that your user name and password are the same on both computers and make sure you have administrative privileges on the remote computer, and then you can stop the machine with the command "shutdown".

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  In fact, it's easier to use the remote desktop.  Even if you do not have a "Shutdown" option in the start menu, you can always open a command prompt window (start-> Run-> "cmd") and enter the command:
  stop s f t 35
  This will give you 35 seconds to logoff this computer before its judgment (assuming that you have administrator privileges).

  You can also look in the command "psshutdown' of the PSTools Suite
  PSTools: <> http://technet.microsoft.com/en-us/sysinternals/bb896649 >

  HTH,
  JW

• How to remove the old sansa playlist on another computer?

  Hello

  I changed my computer and I can't delete the playlists of my sansa clip:

  in the new computer, the old files (that are currently on my sansa clip) do not appear in windows media player.

  and they do not even appear in windows Explorer [Sansa Clip (E )]

  I can only connect to the computer in MSC mode.

  I know I can delete one of the MP3 directly from the device while listening to, but how to remove the titles of the playlist?

  I have so much of...

  You can't just reset everything?

  You could just reformat the drive under the system settings?  This will clear all user content, but note that this includes your music or audio books - transfer you want to save on your PC first.

• How can I move an ESXi host to another?

  Hello

  I have 2 ESXi hosts running on similar hardware. SSH is enabled on both hosts. I need to move all the VMs from one host to another. What will be the most effective way to do it?

  Most average effecitive: buy vSphere Essentials, configure vCenter, connect the two hosts, virtual machines turn off, do a right click and "migrate." 1 k$ for 3 hosts and vCenter.

  Less effective, but cheaper way: turn off virtual machines, copy VMs to an another ESXi, search for all data, made store .vmx files right-click and "add to the inventory.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How to use the Valueset array in an another Table Valuset

  Hi friends,
  
  I have a requirement let me explain the scenario.
  
  
  in a segment of the deposited Keyflex, I need to get all the notes of the company. that i made using the valueset table.
  
  now in another segment of the kff, I need to get all the steps of the year according to the selected category.
  
  like if I ranks say G1, G2, G3, G4...
  and no rank
  for G1-steps (1,2,3,4,5,6)
  for G2-steps (1,2,3,4)
  for G3-steps (1,2,3)
  for G4-(1,2,)
  etc.
  My requirement is now if the user select the grade G1 of the valueset. then in another filed of the segment would come only those steps that are valid for this rank.
  
  I hope that I have given clear pic of my requirement can someone please help me, how to do this.
  
  
  Thanks in advance.

  Hello

  I think that the requiremnt can be achieved by building the master as independent Valueset (for example: Grades) and child as a dependent (eg Valueset; Gradestep).

  condition is possible in my opinion. give it a try in the dev instance.

  See you soon
  M.

• How to stop the clicked links open in another tab in use?

  Using Firefox 25.0 on XP SP3.
  When multiple tabs are open by clicking a link in the direct current tab will often open the requested page (link) in another (non-living) current tab instead of the direct current tab or a new tab, which is not acceptable

  Thanks for all the answers.
  Very gratifying to know there are helpful people interested.
  I have my middle button set to "Back" so that it is not an easy option.
  Now THAT CTRL-click in effect force a new tab to open it, but it is a bit of a pain.
  I tried Safe Mode and behavior continued.
  Completely uninstalled and reinstalled Firefox and the behavior continued.
  So far I have had replicated my movements outside to visit various (not always the same) web sites.
  I had been using search engine Findamo as it seemed to be on the start page of Firefox and I had not seen before.
  I'm new to Firefox as Windows Internet Explorer becomes increasingly useless that XP cannot perform an iteration later than V.8
  The next time I haven't used Findamo and went back to Google - strange behavior disappeared!
  Heckling. Statements of mental health.
  Thanks for all your help.

• How to pass the parameter one form to another form?

  Hello
  
  I want to pass the parameter one form to another form called.
  
  What are the steps I want to do.
  
  Please guide me
  
  Iqbal
  
  Published by: Sabrina on July 21, 2010 23:38

  You want to see this link...

  sheikyerbouti.developpez.com/forms/Forms_Parameters.doc

• TZ300W - how to use the policy monitor host VPN network

  is easy to create the network to any host Wan monitor policy.

  But if I want to monitor VPN host, how can I do...?

  Monitor VPN host? Control if the VPN work? I use the Zabbix software to monitor my hosts.

• How to activate the log captures host esxi 4?

  Hi all... I'm trying to gather some disconnects an ESXi host for troubleshooting 4U1. I need to collect the /var/log/vmkiscid.log of the host files. Can I do this with vMA? I saw a walk through on how to enable this in the documentation. Any help would be great! Thank you!!!

  I'm sure it's documented in the vMA administration guide, but you will need to use vi-logger to toggle logging remotely to your host ESX (i)

  [vi-admin@scofield himalaya.primp-industries.com][http://reflex.primp-industries.com|http://reflex.primp-industries.com]$ vilogger
  Usage: vilogger 
  command is one of:
          enable          [--server ]
                          [--logname ]
                          [--collectionperiod ]
                          [--numrotation ]
                          [--maxfilesize ]
  
          disable         [--server ]
                          [--logname ]
                          [--force]
  
          list            [--server ]
                          [--logname ]
  
          updatepolicy    [--server ]
                          [--logname ]
                          [--collectionperiod ]
                          [--numrotation ]
                          [--maxfilesize ]
  
          help | --help | -h  []
  

  Journaling saves only files default base, particularly on ESXi where you don't find additional newspapers such as the Console of Service ESX classic iSCSI newspapers.

  Here's a look at what he's going to capture.

  hostd.log  hostd.log.1  messages.log  messages.log.1  vmkernel.log  vmkernel.log.1  vmksummary.txt  vmkwarning.log  vmkwarning.log.1  vpxa.log  vpxa.log.1
  

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• How to get the gif file hosted by using the Http connection?

  Hello

  I have an application that downloads animation gif from a server by using the http connection. Here is the code I use to download the image.

  try {
  
              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);            httpConnection.setRequestMethod(HttpConnection.GET);
  
              if (httpConnection.getResponseCode() == HttpConnection.HTTP_OK) {                DataInputStream dS = httpConnection.openDataInputStream();
  
                  byte[] data = new byte[dS.available()];                dS.read(data);
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(data, 0,data.length);
  
              } else {                throw new Exception("ResponseCode:" + httpConnection.getResponseCode());            }        } catch (Exception e) {                        gifImage = null;            e.printStackTrace();        }
  

  the problem with this code is, when the gif file is 1175 bytes above, it does not load the gif.

  example:-If the gif on the server is 1500 bytes, this code retrieves only 1175 bytes.

  I think that the rest of the bytes are sent in a different package. But how to get them.

  can someone please provide a code for buffering the inputstream?

  any help is appreciated.

  Dieye

  Hmm, nobody seems to know how to do, it seems. Here's how I did it.

              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);
              httpConnection.setRequestMethod(HttpConnection.GET);
  
              int responseCode = httpConnection.getResponseCode();
              if (responseCode == HttpConnection.HTTP_OK) {
                  inputStream = httpConnection.openInputStream();
                  ByteArrayOutputStream byteArrayOutputStream = new ByteArrayOutputStream();
  
                  byte[] buffer = new byte[256];
                  int len = 0, imageSize = 0;
  
                  while (-1 != (len = inputStream.read(buffer))) {
                      byteArrayOutputStream.write(buffer);
                      imageSize += len;
                  }
  
                  byteArrayOutputStream.flush();
                  byte[] imageData = byteArrayOutputStream.toByteArray();
                  byteArrayOutputStream.close();
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(imageData, 0, imageSize);