How to enable the programs in the system configuration

Similar Questions

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman

• How can I open the system configuration

  I am running windows xp (version 2002).  How to find the system configuration?

  There is no 'system configuration' in the Panel (at least on my system).

  There is a System option which open to the System Properties screen.

  If mean you the System Configuration utility, click Start, run, and in the type box:

  Msconfig

  Click OK to open the System Configuration utility.

  If you want to see on your current XP configuration information, click Start, run, and in the type box:

  Msinfo32

  Click OK to open the System Information applet.

  It's the same thing you see if you click on start, programs, accessories, System Tools, system information.

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• Satellite L650D - 10 H - how to recover the system?

  Nice day

  Today my OS on my laptop has been altered, he told me to restore my system. Windows recovery program does not work, every reboot of the same corrupted file. So I tried the vista edition Windows Home premium 64 bit dvd of my brother. Changed the options in BIOS and boot from there, but it took about 20 minutes to start the installer with the language menu.

  I noticed that the lamp 'written on the hard disk' shines all the time and from time to time the HARD drive is not listed in my BIOS. Maybe my HARD disk is damaged?

  Now my question is, how to restore the system or to stand up a new OS? What can I do to get my laptop still running? Where to send and what costs?

  best regards and thanks for any help
  oxxxe

  Edit: now the hard drive is still listed in the bios

  Post edited by: oxxxe

  Hi oxxxe,

  Generally you can restore the factory settings using the Toshiba recovery disc. Have you created this disk?

  In General, if the HARD disk does not appear in the BIOS from time to time, it seems to be a malfunction of the HARD drive and it should be changed.
  If your laptop is under warranty, an ASP may fix this problem for free. A list of all the authorized service provider, you can find on the Web from Toshiba site.

• How to remove McAfee security scran more my boot of the System Configuration.

  Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.

  Gary

  Hello

  1. are you able to uninstall successful McAfee software?
  2. is there an error message or error code while you uninstall McAfee software?

  Try the following and see if it helps.

  Method 1:

  How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783

  See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp

  Method 2:

  Uninstall if you have any program name McAfee Security Scan Plus on your computer.
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  See also:

  Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 3:

  The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.

  If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:

  Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

  If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder

  HKEY_LOCAL_MACHINE startupreg

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• How to enable the ReadyBoost feature?

  I would like to know how to enable the ReadyBoost feature.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  I would like to know if it is possible to assign an SSD internal to do this instead of using a USB drive or not.  I tried ReadyBoost option in SSD drive is not available.

  Do you have any suggestions?
  Thanks a lot for your suggestions :>

  Hello

  Sorry, but you cannot use an internal hard drive for ReadyBoost. Indeed, an SSD can not use ReadyBoost.

  This feature can use a USB flash drive external as a hard drive cache to improve the disk read performance.

  More information on the following links.

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  Turn ReadyBoost on or off a storage device:
  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Concerning

• How to end the system idle process

  How to end the system idle process
  ... "it is to consume my whole CPU.

  system:
  HP pavilion g4 series
  Intel core i5

  No it's not! Maybe someone else can give a better explanation, but the way I understand it is that when your system is idle, the system shows 100% idle process or nearby and it is because it has no applications or programs that run, but as soon as you open a program or run an application, and it requires CPU resources say between 1 and 4%, you will see the system idle drop in numbers, which shows the amount of the resources required by the program or open application.

  So I believe that everything that is, show processor resources available to a given point in time.

  Now, a virus can attack the process and change his behavior? I don't know, but if you suspect a malware attack, run complete scans of your system just to be sure.

  Good luck.

• Satellite L500 - how to enable the WLAN?

  I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
  I used to market its WIFI by pressing the FN + F8 keys.
  But now I can't on it using the method.
  I downloaded its end drivers.
  In reality its all the function keys do not work.
  Please let me know how to enable the WLAN and function keys.

  Hi kim2kjy,

  You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?

  The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.

  Check this box!

• How to reset the System Volume Information folder?

  I would like to know how to reset the System Volume Information folder to empty all the potential viruses.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  

  I use cleanmgr /sagerun:1 of the dialog box run when you use a switch.

  However, I usually just use these instructions.

• How to open the system maintenance Troubleshooter in windows vista

  How to open the system maintenance Troubleshooter in windows vista?

  Hello

  Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

  However, you can run the fixit mentioned below for Vista.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  You can take a look at solving the problems of system maintenance in windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

  For more information, please visit the links below.

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Optimize Windows Vista for better performance.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For the anti-virus scanning:

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• How to clean the system

  original title: update

  I HAVE PROBLEMS ON MY COMPUTER... SOMEONE SUGGESTED THAT I TAKE GET ADJUSTED UPWARD.  IS THERE SUCH A THING AS A PC TUNE - UP TO?  IF SO, CAN I DO IT MYSELF OR SHOULD I TAKE IT TO A SPECIALIST?  SOMEONE CAN ME SAY STEPS SHOULD I TAKE?  I WAS TOLD THAT MY OPERATING SYSTEM DOES NOT RIGHT AND THAT IT IS ORIGINALLY MY MCAFEE NOT WORKING PROPERLY.  I'M LOOKING TO REMOVE ANY VIRUSES, TROJANS, MALWARE, ETC FROM MY COMPUTER AND GET MY COMPUTER RUNNING SMOOTHLY.  Thank you.

  Hello

  PC TUNER is 3rd party software and it is not recommended by Microsoft.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I suggest you to follow the methods and check.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

• My question is how to open the system advanced settings in window 7 64-bit home preuim

  My question is how to open the system advanced settings in window 7 64-bit home preuim

  Hello

  Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties.  On the left side of the screen, you will see a link for the advanced system settings.

  You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl

  I would like to know how you, or if you want to say something else.

  Good luck & enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• How to enable the CDI an area of weblogic (not IntegratedWeblogicService)

  I created a project with IDC in Jdeveloper 12.1.3 and it works very well in IntegratedWebLogicService. I deploy it as a WAR file to a weblogic domain. However, the jsf pages cannot get the value of beans and just show #{items.smallest} , #{items.biggest}.

  How to enable the CDI in a weblogic domain base?

  Thank you very much.

  CDI is not an option available on Weblogic server or a configurable parameter.

  It is a feature of the Java EE 6 platform and you can not disable/enable the only feature on weblogic server.

  Try it below to solve the problem

  Connect to the stand-alone server administration console and check if libraries necessary dependency for your application is deployed, or the necessary components have been extended during the creation of the field.

  You could quickly check comparing deployments of libraries on both stand-alone and integrated administration console weblogic server.

  Registered the application libraries is also written in the config.xml file, which can also be used to compare.

  It could be useful!

  Thank you

  Vijaya