How to find the changes made by an installer - compare snapshots?

Similar Questions

• How to merge the changes made to the same analysis?

  Hello

  I have an analysis and there are two issues raised against it, in a real environment.

  In development, the problems starts at the same time. However, only the first resolution should be tested. Assuming that the first problem is solved, how can I "apply" the changes made to the second issue fixed / fixed?

  What are the means and best practices in this situation? OBIEE version is 11.1.1.7.0.

  Thank you.

  Kind regards

  Maury.

  You can use a text editor such as Notepad ++ and the plugin in comparison to compare the XML from the analyses and differences in merger.  That would be the fastest easy/more...

  Just a word of warning - this is completely not supported by Oracle and can VERY easily lead to a corrupted analysis. You'll find plenty of OBIEE'ers experienced out there who have hacked the XML on analysis, but you have also messed up in the process. Always make sure you have a backup and Don ' t cry about it if it breaks.

  To the OP - I don't think that there is a good answer to this problem. The analyses are simple objects, there is no option of merger for them.

• How to get the change history doone on an organization in OIM 11 G

  Hello Experts,
  
  I have a requirement that I need to see the history of all changes made to the attributes of an organization.
  
  Editing an organization such as the change of name of the Organization, status etc. details.
  
  Can you help me please?

  Refer to this.

  Re: How to find the history of changes to attributes of the Organization in OIM 11 G?

• How to find the position of the VI icon currently run on the block diagram of the appellant

  Dear forum,

  I am currently trying to use a LabVIEV VI as a simple sequencer: several (very slow) actions must run one after the other. Each action is represented by a Sub - VI, some actions are executed several times. My task is to view the Subvi somehow executing.

  My first intention (just manipulate the icon of the VI running with 'Icon.Get VI as Image data' / 'Icon.Set VI of Image data' invoke nodes) has failed, because it changes all instances of the VI icon. If you use the same VI several times, all these VI icons are changed (see here: http://forums.ni.com/t5/LabVIEW/How-to-change-animate-icon-of-currently-running-VI/m-p/3120754/highl... )

  My current approach is to use an image of the block diagram (with "VI: block diagram: get resized Image ' call method) in a picture of the front panel control and working within this control. But for this I need to know the position of the icon of the VI running. I know that I can assess the limits and Position via the properties GObj, but how to find the VI running (note that a VI can be installed several times on the block diagram, so the name of the VI is not unique)? IMHO the easiest way might be if a VI might find its icon on the block of the appellant diagram itself when it is run...

  It is clear that this position is not yet the position on the photo, but this conversion is a small piece of work...

  Kind regards

  cpschnuffel

  
  

• How to find the function to remove the ink level

  Can someone please tell me how to find the function "for the removal of the ink level window" I need know when I use no to factory ink cartridges. I have Windows XP, but this is probably not important.

  Hi Laura,

  Find things such as ink levels is a function of the printer driver.

  This is provided by the manufacturer of the printer, and they are the best resource on the operation of their particular drivers.  Therefore, it is best to ask the manufacturer of the printer for advice on this issue.

  Sometimes, there is an icon in the taskbar that you can get this information.  Yet once, it is a function of the driver and the printer software.

  For reference:

  Check on a printer ink levels

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-ink-levels-on-a-printer

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• How to find the question after hp support assistant opening when the icon indicates the red exclamation point?

  Hi guys,.

  A new pavilion g6 and sometimes get the red exclamation on the HP SA but when I open the screen of the wizard how to find the issue which marked the icon?

  The Assistant has just opened, and I see the screen normal but not extra "Pavilion" to tell me what needs attention?

  Is this normal?

  See you soon!

  Ian

  screenshot of open SA HP...

  

  Hello again, TheHandyCrowd, and ionamartin123.

  Made this suggestion solves your problems?  I was curious about the result.

  I hope that you are having a great day!

• Have deleted implementing up-to-date, but while they inspected I think it's still in my system in my history how to find the files to remove it completely?

  Original title: Remove KB3035583

  I deleted the update, but while they were inspecting it, I think it's still in my system in my history how to find the files to remove it completely?

  I am running Windows 7

  Microsoft have now updated the status of GWX, whenever changes to update is downloaded as a new update re. It is not beyond their intrigues to GWX ineffective as well. Unfortunately we have to be patient until 29 July when, according to the assurances of Microsoft this mess will be disabled. I don't know if there is code to turn it off or we wanted yet another update to do.

• How to find the Mac address of a Blackberry Curve 8130 BlackBerry Smartphones

  I have a wireless router in my house that has a MAC filter enabled. I do not have permission to change this setting on the router. I need to find the Mac address of the Blackberry 8130 device to be added to the routers MAC filter allow list only.

  Can someone help me with the knowledge on how to find the MAC address of a Blackberry 8130 Curve?.

  Thanks for the help in advance.

  Concerning

  VK

  I forgot to mention: new to Blackberry Curve 8130 (previous was the old black version with the wheel) and the network is T-Mobile with SIM card (not CDMA).

  Does show under Options | Status as the WLAN Mac address?

• How to find the url of adf application that has been deployed to the glassfish Server? I try but? It is the image of the page.

  Mr President

  This is the page of the glassfish Server

  

  How to find the url of adf application that has been deployed to the glassfish Server? I try but? It is the image of the page.

  

  In the jdev web module are

  [11: 09:38] wrote the Web for F:\backup of AshCMS\AshCMS\ViewController\deploy\AshCMS_ViewController_webapp.war application Module

  [11: 10:33] wrote the Module Enterprise Application to F:\backup of AshCMS\AshCMS\deploy\AshCMS_Project1_AshCMS.ear

  [11: 10:33] Application deployment...

  [11: 14:24] Application deployed successfully.

  [11: 14:24] time to deployment: 8 minutes, 11 seconds

  [11: 14:24]-deployment is complete.  ----

  what url in the browser.

  Concerning

  Mr President.

  I run my application on built-in web logic server and get the url from there

  http://localhost:7101 / ViewController/faces/MainPage

  then simply change the localhost of 7101 to 8081 as below

  http://localhost: 8081, ViewController, faces, MainPage

  and it works

  Concerning

• How to find the track of the script of the Controlfile Correct .trc file in /bdump

  Hi guys
  
  It's more childish requests in this forum...
  
  
  I want to know how to find the correct trace file when we question change database trace at sqlprompt to create controlfile script backup controlfile.
  
  As I find it a little confusing to go through the same day & .trc files almost even among hundreds of trace file in the directory /bdump to find the right one.
  
  If we find the alert log file in /bdump directory $ ls-al l * & get us the log file alert... If there's a similar way to find the Trace of controlfile script file?
  
  
  
  Thanks and greetings
  MZ

  Hi MZ;

  1. as mentioned here to use a BACKUP CONTROLFILE to TRACE AS syntax and give the name and the path that you want to
  2. check the alert.log
  3. check under bdump using the command ls - lrt

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• How to find the last pasted paragraphs FMP?

  I'm sticking FMP several objects at once in a file (a file of changes to the sections containing the changebars) in the main text flow. I want a separator line to go at the end of each pasted section, so I try to insert one after the paste operation. But instead of a line between each section, all lines are added at the end of the file, after all the sections. So if there are 3 glued sections at the end of the file are three lines. My code is below, do you know how I could fix this?

  Thank you, Mark

  function copyPasteChanges (doc, chgRange) {}

  Select the section with changebar and copy it.

  doc. TextSelection = chgRange;

  doc. Copy();

  Prepare for the changes doc and paste there the modified section.

  var firstChgPgf = changesDoc.MainFlowInDoc.FirstTextFrameInFlow.LastPgf;

  var changesTloc = new TextLoc (firstChgPgf, Constants.FV_OBJ_END_OFFSET);

  var changesTRange = new TextRange (changesTloc, changesTloc);

  changesDoc.TextSelection = changesTRange;

  changesDoc.Paste ();

  To go at the end of the file again (I think)

  var lastPgf = changesDoc.MainFlowInDoc.FirstTextFrameInFlow.LastPgf;

  var dividerPgf = changesDoc.NewSeriesPgf (lastPgf);

  var TLoc = new TextLoc (dividerPgf, 0);

  changesDoc.AddText (TLoc, '_');

  }

  Hi Mark,

  The problem is that the dough does not occur when you think. The dividing line is added at the end of the file, but are not your actions of dough. Actually, I think that maybe a little random where pasta is produced, because this line:

  var changesTloc = new TextLoc (firstChgPgf, Constants.FV_OBJ_END_OFFSET);

  .. .is does not create a valid text location. You can check this by abandoning the service after:

  changesDoc.TextSelection = changesTRange;

  .. and look at where's the insertion point. It will probably be everywhere where you left it last, because the call is not valid. I can't tell you exactly why, except that it has something to do with the fact that you are using the last paragraph in the stream. There is something weird to try to define a range of full-paragraph text with the last paragraph. I'm sure it's related to how the last TFP in a stream does not show a mark of FMP, but beyond that, I don't know how to do what you're trying to do with the last paragraph.

  Having no knowledge of how do it right, any time I need to do this, I create a paragraph "dummy" at the end of the flow to fill that space strange 'last FMP", then do the work around it. In the end, I just want to remove fake TFP. I don't know if it's a good idea or not, but it's the only way I ever get it to work and it sorts the mirror how you could do this manually in the GUI.

  With this, I modified your script as follows, and it seems to work better. Note that I also modified the logic of how to find the last paragraph of the flow by writing a separate function. Your call to the 'FirstTextFrameInFlow' is OK, unless your doc begins to span several pages and/or begins with several empty pages. The function I wrote ensures that you really the last TFP in the stream.

  I hope this helps.

  Russ

  function copyPasteChanges (doc, chgRange) {}

  Select the section with changebar and copy it.

  doc. TextSelection = chgRange;

  doc. Copy();

  Prepare for the changes doc and paste there the modified section.

  var lastPgf = getLastPgf (changesDoc);

  var dummyPgf = changesDoc.NewSeriesPgf (lastPgf);

  var changesTloc = new TextLoc (dummyPgf, 0);

  var changesTRange = new TextRange (changesTloc, changesTloc);

  changesDoc.TextSelection = changesTRange;

  changesDoc.Paste ();

  To go at the end of the file again (I think)

  Don't forget that last TFP is now fake TFP

  lastPgf = getLastPgf (changesDoc);

  var dividerPgf = changesDoc.NewSeriesPgf (lastPgf.PrevPgfInFlow);

  var TLoc = new TextLoc (dividerPgf, 0);

  changesDoc.AddText (TLoc, '_');

  dummyPgf.Delete ();

  }

  function getLastPgf (doc)

  {

  textFrame var is doc. MainFlowInDoc.LastTextFrameInFlow;

  var lastPgf = textFrame.LastPgf;

  While (! lastPgf.ObjectValid () & textFrame.ObjectValid ())

  {

  textFrame = textFrame.PrevTextFrameInFlow;

  lastPgf = textFrame.LastPgf;

  }

  Return lastPgf;

  }

• How to find the server ftp address information in BusinessCatalyst, said adobe technical support

  How to find the address of the FTP information to the catalyst for business, mine says adobe support are wrong. I haven't changed anything and it used to connect. someone please understand me, not too sure how to use a forum and do not know how to get the support of catalyst.

  Hi Michael,

  I think you talk to change pass regular FTP to the SSH connection which is now required.

  Please see the article below on this recent update and the changes needed to establish your connection via (DW or FTP client).

  - http://forums.adobe.com/docs/DOC-2841

  Kind regards

  -Sidney

• How to find the child level for each table in a relational model?

  Earthlings,
  
  I need your help, and I know that, "Yes, we can change." Change this thread to a question answered.
  
  So: How to find the child level for each table in a relational model?
  
  I have a database of relacional (9.2), all right?
  

  .
       O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
      /↑\ Fks
     O"O O" <-- level 2 for first table (circle)
    /↑\ Fks
  "o"o"o" <-- level 1 for middle table (circle)
     ↑ Fk
    "º"

  Tips:
  -Each circle represents a table;
  -Red no tables have foreign key
  -the picture on the front line of tree, for example, a level 3, but when 3 becomes N? How is N? That is the question.
  
  I started to think about the following:
  
  First of all, I need to know how to take the kids:

  select distinct child.table_name child
    from all_cons_columns father
    join all_cons_columns child
   using (owner, position)
    join (select child.owner,
                 child.constraint_name fk,
                 child.table_name child,
                 child.r_constraint_name pk,
                 father.table_name father
            from all_constraints father, all_constraints child
           where child.r_owner = father.owner
             and child.r_constraint_name = father.constraint_name
             and father.constraint_type in ('P', 'U')
             and child.constraint_type = 'R'
             and child.owner = 'OWNER') aux
   using (owner)
   where child.constraint_name = aux.fk
     and child.table_name = aux.child
     and father.constraint_name = aux.pk
     and father.table_name = aux.father;

  Thought...
  We will share!
  
  Thanks in advance,
  Philips
  
  Published by: BluShadow on April 1st, 2011 15:08
  formatting of code and hierarchy for readbility

  Have you looked to see if there is a cycle in the graph of dependence? Is there a table that has a foreign key to B and B has a back of A foreign key?

  SQL> create table my_emp (
    2    emp_id number primary key,
    3    emp_name varchar2(10),
    4    manager_id number
    5  );
  
  Table created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create table my_mgr (
    2    manager_id number primary key,
    3    employee_id number references my_emp( emp_id ),
    4    purchasing_authority number
    5* )
  SQL> /
  
  Table created.
  
  SQL> alter table my_emp
    2    add constraint fk_emp_mgr foreign key( manager_id )
    3         references my_mgr( manager_id );
  
  Table altered.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1   select level lvl,
    2          child_table_name,
    3          sys_connect_by_path( child_table_name, '/' ) path
    4     from (select parent.table_name      parent_table_name,
    5                  parent.constraint_name parent_constraint_name,
    6                  child.table_name        child_table_name,
    7                  child.constraint_name   child_constraint_name
    8             from user_constraints parent,
    9                  user_constraints child
   10            where child.constraint_type = 'R'
   11              and parent.constraint_type = 'P'
   12              and child.r_constraint_name = parent.constraint_name
   13           union all
   14           select null,
   15                  null,
   16                  table_name,
   17                  constraint_name
   18             from user_constraints
   19            where constraint_type = 'P')
   20    start with child_table_name = 'MY_EMP'
   21*  connect by prior child_table_name = parent_table_name
  SQL> /
  ERROR:
  ORA-01436: CONNECT BY loop in user data
  

  If you have a cycle, you have some problems.

  (1) it is a NOCYCLE keyword does not cause the error, but that probably requires an Oracle version which is not so far off support. I don't think it was available at the time 9.2 but I don't have anything old enough to test on

  SQL> ed
  Wrote file afiedt.buf
  
    1   select level lvl,
    2          child_table_name,
    3          sys_connect_by_path( child_table_name, '/' ) path
    4     from (select parent.table_name      parent_table_name,
    5                  parent.constraint_name parent_constraint_name,
    6                  child.table_name        child_table_name,
    7                  child.constraint_name   child_constraint_name
    8             from user_constraints parent,
    9                  user_constraints child
   10            where child.constraint_type = 'R'
   11              and parent.constraint_type = 'P'
   12              and child.r_constraint_name = parent.constraint_name
   13           union all
   14           select null,
   15                  null,
   16                  table_name,
   17                  constraint_name
   18             from user_constraints
   19            where constraint_type = 'P')
   20    start with child_table_name = 'MY_EMP'
   21*  connect by nocycle prior child_table_name = parent_table_name
  SQL> /
  
         LVL CHILD_TABLE_NAME               PATH
  ---------- ------------------------------ --------------------
           1 MY_EMP                         /MY_EMP
           2 MY_MGR                         /MY_EMP/MY_MGR
           1 MY_EMP                         /MY_EMP
           2 MY_MGR                         /MY_EMP/MY_MGR
  

  (2) If you try to write on a table and all of its constraints in a file and do it in a valid order, the entire solution is probably wrong. It is impossible, for example, to generate the DDL for MY_EMP and MY_DEPT such as all instructions for a table come first, and all the instructions for the other are generated second. So even if NOCYCLE to avoid the error, you would end up with an invalid DDL script. If that's the problem, I would rethink the approach.

  -Generate the DDL for all tables without constraint
  -Can generate the DDL for all primary key constraints
  -Can generate the DDL for all unique key constraints
  -Can generate the DDL for all foreign key constraints

  This is not solidarity all the DOF for a given in the file object. But the SQL will be radically simpler writing - there will be no need to even look at the dependency graph.

  Justin

• How to find who changed his mind?

  Can we know how to find "* who changed a view given in the database? ' * ' as username, computer name, or same OS user name nay thing at least one of them, if not all.
  
  When I checekd with
  SELECT last_ddl_time FROM object where object_name =: object_name,.
  I found his altered 5 days back.
  
  Any help would be appreciated.
  
  Thank you.

  Hi again: P.

  The only way to do this is you has BEEN verified this point of view.

  You can do this for next time by using the following procedure.

  http://www.Oracle-base.com/articles/10G/Auditing_10gR2.php

  Kind regards

  Mario Alcaide
  http://marioalcaide.WordPress.com

• After deployment got "404 Not Found".  How to find the correct URL?

  For the experienced:
  
  Preparing to deploy my application, I use JDeveloper 10.1.3.4 to deploy the application on the server standalone oc4j included in JDeveloper. After deployment, I get the error "404 Not Found" when trying to invoke the application in a browser. The deployment seems OK, because the log in JDeveloper window showed no error executing deployment from inside JDeveloper. So I guess the question is how to find the correct URL to invoke the application. Here are the steps I took to make the deployment.
  
  First, I installed the standalone oc4j by running the .bat < jdev_home > \jdev\bin\start_oc4j file. Installation is OK because I have deployed the application SRTutorial and invoked successfully in a browser.
  
  The WAR file has been created by right-clicking on the ViewController project and select this option to create a WAR file. At the root of the application its own name, I typed "ZB" in the area of the root of context.
  
  Then in ViewController-> resources, right_click the deployment file (ZBOV.deploy) and chose ' deploy to "the local_standalone_oc4j. Messages in the Journal of JDeveloper window for deployment are all nice and clean without errors.
  
  I then used this url to invoke the application deployed in a browser:
  
  http://localhost:8888/ZB/faces/staff/login.JSPX
  
  But I got an error "404 Not Found". Immediately, I tried citing the application of SRTutorial, and it works fine.
  
  Login.JSPX is one of the pages of the application. In the browser of the application, it is with other files in the content of ViewController/Web/personal folder, so I used /staff/login.jspx after ZB/faces.
  
  What could be wrong? If the deployment is really successful, how to find the correct url to invoke the application?
  
  Thanks a lot for your help!
  
  
  Newman

  Hello

  According to me, there are 2 possibilities (could be more that I'm not aware of if :)).

  1. your deployment profile has been changed to use a different context root.
  2. your request has not been installed correctly.

  To 1, try to create a new deployment profile and leave the values by default as it is the case, run the jspx page, get the root context, deploy the application to a different OC4J instance (using the new deployment profile), and then run the application with the context root, that you received from the embedded OC4J.

  For 2, check the log file and see if you had any error / exception.

  HTH.

  Arun-