How to find the character / change size?

Similar Questions

• How to find the size of the virtual server?

  Hello

  We intend to pass our applications 4 virtual servers has 2 physical servers. In this process, we need to identify the size of the current virtual servers to use as a starting point to configure or add the size in physical server. can anyone provide information on whats stats to be noticed and how to find the size of the current virtual servers?

  Thank you

  Hi Sekhar, there.

  in general, it is a fairly complex task if you want to size the new platform correctly, i.e. not to oversize it and have very low use below, i.e. spend too much on equipment.

  In fact, it's the first thing to consider the level of use of the new platform. Most likely your organization (HW and infrastructure) has targets to a minimum. optimal and maximum usage levels.

  In the case where you do not have this as a starting point, and then you continue with load average and the current peak (CPU, RAM, NW). To these basic lines, you can use the statistics of WLS Admin Console, where the use of CPU and memory statistics are presented since the server was last started. For more detailed statistics, you can use WLDF to capture measures key at regular intervals, and then base your analysis of these data.

  Finally and above all, the size of FS, but I've seen some comments above related to the size of the FS.

  HTH,

  A.

• How to find the size of the table?

  Hi all

  Can anyone suggest how to find the size of the table? I had a few (15272 selected lines) on the name of "CMPT_" How can I check only 'CMPT_' size tables?

  
  

  
  

  
  

  
  

  Please someone help give the SQL query to run.

  
  

  Thanks in advance.

  
  

  Vincent
  

  madala03 wrote:

  Hi thanks for the reply

  I'm out like below

  SUM(BYTES/1024/1024)

  --------------------

  25383.25

  But how to check all the name of tables CMPT and their sizes?

  Select nom_segment, dba_Segments sum(bytes/1024/1024) where nom_segment like ' % CMPT GROUP BY nom_segment;

• How to find the size of the semantic model

  Hi all
  
  Please can you tell me how to find the size of the semantic model.
  
  Thank you
  INDU

  Hi Indu,

  A couple of several things:

  1 we still need an application, in order to account for the storage of the Table in the Application

  This query gives you the name of application table

  Select the table table_name from mdsys.sem_model$
  where model_name = '';

  This will give you the size in MB

  Select semmodel.table_name, dbaseg.bytes/1024/1024 MB
  of mdsys.sem_model$ semmodel, dba_segments dbaseg
  where semmodel.table_name = dbaseg.segment_name
  and semmodel.model_name = '';

  2. If the model is the only one of the semantic network, you can get the space used by the table of $ RDF_VALUE using this query

  Select bytes/1024/1024 MB dba_segments where nom_segment = '$RDF_VALUE ';

  If there are several models, this space is shared between all of them.

  Kind regards!
  Jorge

• How to find the size of the partitioned tables?

  How to find the size of the partitioned tables?

  Select nom_segment, sum (bytes) /(1024*1024) 'Size in MB' from dba_segments
  where owner = 'owner name' and segment_type like '% PARTITION % '.
  Group by nom_segment;

• How to find the size of the text string...

  Hi friends,

  How to find the size of the text, in KB or in bytes or MB, I have a text box control, when I type a text in do I find the size of the text that is entered control.please of entry help very urgent...

  Thnaks

  Balu-

  Hi David,

  Nice Solution, but I think that it will not give the exact size of the string for a particular case where the string contains UTF string as a single letter format can exceed more than 1 byte.

  So I think it should be modified as:

  private function getTextSize(value:String): String

  {

  var div_by:int = 100;

  var sze_is:String = 'KB ';

  var len_is:int = getUTFLength (value); now the length is actually measured, regardless of the format of the text

  If (len_is > 1000000)

  {

  div_by = 100000;

  sze_is = 'mb ';

  }

  Return(string(math.round(len_is/div_by)/10)+sze_is);

  }

  private void getUTFLength(value:String):int
  {
  var byteArray:ByteArray = new ByteArray();
  byteArray.writeUTFBytes (value);
  Return CharArray.Length;
  }

  Concerning

  -Vikash

• How to find the size of the downloaded image on a column of type blob in a table?

  How to find the size of the downloaded image on a column of type blob in a table?

  Vidya,

  You can use the built in function dbms_lob.getlength to get the length (size) of a LOB column or a bfile type.
  Check out this link.

  http://download.Oracle.com/docs/CD/B10501_01/AppDev.920/a96612/d_lob2.htm#1008995

• How to find the size of the scheme with or without fragmentation

  Hello Sir,
  How to find the size of the scheme with or without fragmentation?

  to find all of the bytes used by a schema, you can add the bytes for the owner of the dba_segments views.

  for fragmentation, I guess you want to know about the space left between the segments.

  finding depends on the design and standards of your database.

  Each scheme has its own storage space? If Yes, then you can take the total space used in storage and then subtract the number of the dba_segments.

• How to find the position of the VI icon currently run on the block diagram of the appellant

  Dear forum,

  I am currently trying to use a LabVIEV VI as a simple sequencer: several (very slow) actions must run one after the other. Each action is represented by a Sub - VI, some actions are executed several times. My task is to view the Subvi somehow executing.

  My first intention (just manipulate the icon of the VI running with 'Icon.Get VI as Image data' / 'Icon.Set VI of Image data' invoke nodes) has failed, because it changes all instances of the VI icon. If you use the same VI several times, all these VI icons are changed (see here: http://forums.ni.com/t5/LabVIEW/How-to-change-animate-icon-of-currently-running-VI/m-p/3120754/highl... )

  My current approach is to use an image of the block diagram (with "VI: block diagram: get resized Image ' call method) in a picture of the front panel control and working within this control. But for this I need to know the position of the icon of the VI running. I know that I can assess the limits and Position via the properties GObj, but how to find the VI running (note that a VI can be installed several times on the block diagram, so the name of the VI is not unique)? IMHO the easiest way might be if a VI might find its icon on the block of the appellant diagram itself when it is run...

  It is clear that this position is not yet the position on the photo, but this conversion is a small piece of work...

  Kind regards

  cpschnuffel

  
  

• How to find the function to remove the ink level

  Can someone please tell me how to find the function "for the removal of the ink level window" I need know when I use no to factory ink cartridges. I have Windows XP, but this is probably not important.

  Hi Laura,

  Find things such as ink levels is a function of the printer driver.

  This is provided by the manufacturer of the printer, and they are the best resource on the operation of their particular drivers.  Therefore, it is best to ask the manufacturer of the printer for advice on this issue.

  Sometimes, there is an icon in the taskbar that you can get this information.  Yet once, it is a function of the driver and the printer software.

  For reference:

  Check on a printer ink levels

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-ink-levels-on-a-printer

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• How to make the default text size and line spacing in small Sticky Notes?

  How to make the default text size and line spacing in small Sticky Notes

  Hello

  I suggest that you try the method below and check if it helps.

  Method 1: analysis of auditor of file system (CFS)

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. To perform a scan of the SFC, check out the link: https://support.microsoft.com/en-us/kb/929833.

  Note: the steps for Windows 8/8.1, works perfectly with Windows 10.

  Method 2: clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you install a program, an update or when you run a program in Windows. Follow the link to perform the clean boot: https://support.microsoft.com/en-us/kb/929135.

  Kind regards

  Angelo bar

  Microsoft community

• Have deleted implementing up-to-date, but while they inspected I think it's still in my system in my history how to find the files to remove it completely?

  Original title: Remove KB3035583

  I deleted the update, but while they were inspecting it, I think it's still in my system in my history how to find the files to remove it completely?

  I am running Windows 7

  Microsoft have now updated the status of GWX, whenever changes to update is downloaded as a new update re. It is not beyond their intrigues to GWX ineffective as well. Unfortunately we have to be patient until 29 July when, according to the assurances of Microsoft this mess will be disabled. I don't know if there is code to turn it off or we wanted yet another update to do.

• How to find the absolute position of the end of the text, it can be one or more,

  How to find the absolute position of the end of the text, it can be one or more,

  in the position I need to inseart the image of the size of the font that it friendly ordinary view sequiential - image as custom image

  Please help us find the position of the text, and even for a function more, I demanded the conclusion the text length

  I want to do we will be right and the other will be left how I can I align is their way to find the width of the label or text?

  Thank you

  This should help align your labels layouts, depending on what you did you do could go with absolute layout, docking station or stack (allows you to align the top to bottom or left to right)

  I'm not too sure that everything, however, to determine the length of the text, I would think that you could store the text in a string and then somehow programmatically count each letter & do return a result... not exactly on how to do it but it's an idea

• How to set the character encoding in Blackberry

  Hello

  In my application, I get the data using http server methods...

  now my question is that, in that the data is seen some like that

  ex: Córdoba, but inside, I do not like this...

  After some R and D, I thought that I have to set the character encoding...

  can someone tell me how to set the character encoding and how I can get all languges in my application

  See below the code for reference

   HttpConnection c = null;
                      InputStream is = null;
                      DataOutputStream os = null;
                      int rc;
      c = (HttpConnection)Connector.open("http://10.10.10.00012:8585CountryDatar;deviceside=true;");
                              c.setRequestMethod(HttpConnection.POST);
                              c.setRequestProperty("If-Modified-Since", "29 Oct 1999 19:43:31 GMT");
                              c.setRequestProperty("User-Agent", "Profile/MIDP-2.0 Configuration/CLDC-1.0");
                              c.setRequestProperty("Content-Language", "en-US");
                             /* Getting the output stream may flush the headers */
  
                              os = (DataOutputStream)c.openDataOutputStream();
                              byte[] res = net.rim.device.api.system.GPRSInfo.getIMEI();
                              os.writeUTF(net.rim.device.api.system.GPRSInfo.imeiToString(res));
  
                              os.flush();
                              /* Optional, getResponseCode will flush
                                  Getting the response code will open the connection,
                                  send the request, and read the HTTP response headers.
                                  The headers are stored until requested.
                              */
                              rc = c.getResponseCode();
  
                              if (rc != HttpConnection.HTTP_OK) {
                                 throw new IOException("HTTP response code: " + rc);
                              }
  
                              is =(DataInputStream)c.openDataInputStream();
                               byte[] data1 = new byte[256];
                               int len = 0;
                               int size = 0;
  
                              int ch;
                              StringBuffer sb = new StringBuffer();
                             while ( -1 != (len = is.read(data1)) )
                             {
                                  sb.append(new String(data1, 0, len));
                              }                
  
                           data = sb.toString();       //Here data is a string storing all data came from server
  

  Give us a break please.  I have other things to do!

  You set the encoding here:

  SB. Append (new String (data1, 0, len));

  Most of the servers give you UTF - 8, but you know that.  Anyway, if it is UTF - 8 follow these steps:

  SB. Append (new String (data1, 0, len, "UTF - 8"));

• How to find the Mac address of a Blackberry Curve 8130 BlackBerry Smartphones

  I have a wireless router in my house that has a MAC filter enabled. I do not have permission to change this setting on the router. I need to find the Mac address of the Blackberry 8130 device to be added to the routers MAC filter allow list only.

  Can someone help me with the knowledge on how to find the MAC address of a Blackberry 8130 Curve?.

  Thanks for the help in advance.

  Concerning

  VK

  I forgot to mention: new to Blackberry Curve 8130 (previous was the old black version with the wheel) and the network is T-Mobile with SIM card (not CDMA).

  Does show under Options | Status as the WLAN Mac address?