HP ENVY 17 Quad t connect a Desktop GPU on my laptop

Similar Questions

• HP ENVY x 360 Convertible: add about external gpu on my laptop

  I want to add external gpu on my laptop.

  It is very important to add a gpu because I am not able to play games of high quality graphics with intel.

  Please give me a solution.

  Thanks in advance

  External GPU are not a solution to everything. Perhaps a laptop with a shot of lightning-3 c/USB port can use the external graphic but for older hardware, the only way to reach the eGPU is through the PCI-e slot card which is where the wireless is connected. There is no viable way to open your laptop and install such a device. And even if you could the pci-e slot 1 x and it is not enough bandwidth to work properly the video of the game.

  So it's a bitter pill to swallow, but if you want the game on a laptop, you can buy a portable game.

• I have a desktop computer and a laptop. When I change a bookmark on one, it does not change on the other, even if I am connected to sync

  I have a desktop computer and a laptop.
  When I change a bookmark on one, it does not change the other even though I am connected to the sync.

  Sync is meant to do?

  Most probably one of the two computers has corrupted data which does not allow the sync complete.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• HP Envy 17 Quad Touchsmart t: screen cracked on Touchsmart HP Envy 17 Quad t... What is my screen?

  I have a HP Envy 17 Quad Touchsmart t (item # E2E11AV...)   Product # E114AV... Series # 5CG41002SP)

  It has a cracked screen and lost its ability to "touch", but all other functions are intact.

  I rarely used the "tactile" function, but the crack is an embarrassment and a distraction and if I could fix the crack at a reasonable cost, so I would.

  I have been looking for replacement of the LED screen and appears in the best of my ability.

  The HP "Partsurfer' site lists 2 screens: the manufacturer and the manufacturer 720257-001(BV-HD) 720256-001(AG-FHD)

  My problem: without disassembling the laptop how can I know what screen to buy?

  Please, all advice, help or idea would be appreciated...

  Thanks in advance

  Here are the compatible screen for your appliance part number:

  SPS-DSPLY GROSS PANEL 17.3 LED BV HD-720257-001

  Since it is a hardware problem and I highly recommend you Contact HP Support by phone for further assistance without delay for get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  Although I am an employee of HP, I speak for myself and not for HP

• HP ENVY 17 Quad 740M GT Upgrade t

  I have a HP ENVY 17 Quad-j000 with Windows 8.1 t

  Can I put my discreet GPU NVIDIA GeForce 740 M for a better GPU as a graphics processor NVIDIA GeForce GTX.

  Hello

  This is your other same question. No, physically impossble

  Kind regards.

• Put Windows 7 on hp envy 17 Quad t - now USB no longer works!

  Hello

  I just got a HP Envy 17 Quad t, which came with Windows 8 on it.  I'm not a fan of him, so I installed Windows 7 instead.  After installation do not work many things, as expected, but I was able to install drivers windows 7 for them and got all the functions that have been lost so far, I have noticed to rework except my USB ports.  I tried two different drivers of these boards with no joy.  If someone has the right driver, so I can get USB up and running would be extremely appreciated!

  Thank you

  Max

  OK, was able to fix it myself after a few hours of really messing around.  (I'm not a computer guy, so this announcement to other experts).

  First of all, I went on the Intel site and updated the chipset driver, once again.  This fixed the problem of Bus SM.

  Second, I had to find the driver 5227 RTS for the card reader from RealTek PCIE, which I couldn't find on the site from RealTek but through multiple searches on Google using the portion of the id of material only up to '... in the end 5227."it's strange, because another driver RealTek PCIE card reader worked before Win7 updates, but that even the driver did NOT work thereafter.

  Then he got even more bizarre, to me at least.  The I need drivers were all there in Device Manager, no more yellow triangles, but I plugged my external hard drive on a USB port on the right side of my computer and nothing.  The way in which my office is set up I really only use this side.  Exasperated I tried the USB port on the left with another device.  Alto!  It took.  I had to plug my external hard drive in the left side first and could then unplug and install it on the right side and it worked.  No idea why it would need with one side first, then don't work both sides.  I waited a long time when I plugged it on the right side first before trying the left where he recognized immediately, then immediately recognized on the right after that.

• Can I connect my desktop HP TouchSmart 520-1070 PC to my TV?

  Can I connect my desktop HP TouchSmart 520-1070 PC to my TV?

  Here are the specifications of your desktop HP TouchSmart 520-1070 According to the specs, it seems that this model does not support the video output of any kind (DisplayPort, HDMI, DVI, VGA, etc.). Although it has no HDMI port on the right side, this port is strictly an entry for game consoles, and other video devices. To connect an external monitor to the computer takes longer and the use of an adapter USB-to-video, like the eVGA UV + UV39 or among many other video-to-USB adapters on the market.

  Please send Bravo

• How can I connect my desktop to the internet using my laptop?

  I have a laptop with Windows 7 Home Premium, and it is connected to the internet via WiFi. My desktop (Windows Vista Home Premium) is not a wireless card, and I'm trying to figure out how I can connect the desktop computer to the internet via WiFi to my laptop and a connection cable. I can get two computers to recognize each other, but it won't let me access the internet.

  Hello

  
  You can check out the following link and check if it helps.
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
   
  I hope this helps.

• Is it possible for my laptop to share its wireless connection, my desktop computer can get online with it?

  original title: connect 2 pc set and used for wifi

  Yes iam trying to conect my desktop pc to my laptop which gets very good WiFi and use it as a host you for my office and use the laptop computer wifi also to desktop PC is possible

  Configure your router to allow the Office to have a wireless connection. And make sure your desktop has wireless capabilities.

• HP Envy 15-k151us: HP Envy 15-k151us wifi connects not to do, I've got the wrong driver?

  I deleted Windows 8.1 and installed windows 7 64 bit on my HP Envy 15-k151us, but I can't find the correct driver for my wireless b/g/n adapter. I went to the site to download driver HP and there were at least 4 driver packages. There was a driver package to a Realteck adapter, a card an Atheros card, Intel and Broadcom card. Since I don't know what adapter I have, I have downloaded all 4 of them and tried each of them. After I installed the driver, my laptop seems to recognize the adapter, but it wouldn't connect. I use the wrong driver? How will I know? How is it, I can't connect? It's only my laptop and nothing else.

  My laptop has the following specifications:

  Intel Core i7-4710HQ 2.5 GHz

  Intel HD 4600 graphics card

  Hello:

  You find the parts list for your laptop it comes with the Broadcom BCM43142 802.11bgn 1 x 1 Wi - Fi and Bluetooth 4.0 HMC combination WLAN adapter.

  http://PartSurfer.HP.com/search.aspx?SearchText=J6P00UA

  The fact that you "threw each wireless driver in the book", could have a detrimental effect on the wireless setup.

  I suggest you to reinstall W7 and install that driver wireless broadcom driver bluetooth and see if you get better results.

  Driver LAN Broadcom wireless.  There is a newer driver than the one on your laptop support and driver page.

  File name: sp69014.exe

  This card also comes with bluetooth, so you need this driver bluetooth also.

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

  It is generally recommended to install the following drivers in this order and restart after each installation for best results.

  1. Intel chipset installation utility

  2 HD Intel graphic driver

  3. audio driver

  4. Ethernet driver

  5. wireless driver

  Then you can install the rest in any order you want.

• Connection Remote Desktop - between two Windows XP-based computers

  Setup: desktop win xp pro laptop win xp family, linksys router. broadband connected to the router, computer connected to the router, computer desktop laptop wireless to the router. can use mobile to contrl desktop network domestic by DRC opening and typing of office name or ip address, if I open google and type in ip/tsweb/or office name/tsweb/that will also work, enabled router to the DRC forward to the ip address of the desktop computer by using port 3389 (games and apps section).

  any help would be great I've been looking for a solution for a few days now

  Thank you

  PS using norton 360 and have left DRC in firewall-program rules

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Unable to connect with desktop remotely

  With Windows 7 Pro, try connecting to office having same exact OS W7 pro, both machines are new Dell XPS 8700 s. I get message failed to connect as another 1.2.3 off voltage, i.e., cables etc bad machine. Not true because I can connect to the office with old laptop on XP machine. All other remote employees running W 7 pro can connect to their respective port passed from office machines. I tried every permutation in the desktop settings remotely. I disabled the firewall, checked the services, checked the Office remotely activate, checked the equipment completely but still unable to connect. Someone at - it a suggestions?

  Al

  Hello

  I apologize for the delay in response

  This query is better suited on the TechNet forums. The pros on this forum should be able to help with this query. So, I suggest you to post this query on the TechNet Windows 7 networking Forums by using this link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking%2Cw7itprosecurity%2Cw7itprohardware&filter=AllTypes&sort=lastpostdesc

  Hope this information was useful. Please get back to us with the results and if you need help or have questions about windows, we will be happy to help you.

• Connection remote desktop has appeared in my Start menu, but I don't use it, does that mean someone else has had access?

  I sat down at my computer today (I'm the only person who uses it) and pulled the top of the start menu. There were four programs listed there that I have not used for several months:

  Remote Desktop connection
  Dreamweaver MX
  Freehand MX
  MS Office Picture Manager

  In my opinion, that means that someone had access to my system.

  Can I change my remote desktop connection to protect against this, or is a more complete analysis of my machine required?

  The remote desktop connection settings include providing everyone the read and Read & Execute access. If I remove these options that will make me safer? Skype uses this access (this is the only thing that could, I think I use)?

  I went to system properties and remote access disabled.

  Windows 7 Home Premium, Service Pack 1

  Hello

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you need information from remote desktop connection settings in Windows 7. I will certainly help you in this matter.

  Please visit the links.

  Remote Desktop connection

  http://Windows.Microsoft.com/en-in/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-in/Windows7/what-types-of-Remote-Desktop-connections-should-i-allow

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing

  I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?

  Hi Kelly,

  Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.

  Activating the license on any other machine, please select the option to disconnect all other devices and try again.

  Reference: connect and disconnect activate Cloud Creative applications (deactivated)

  Kind regards

  Sheena

• Envy 17 j185nr: I can update my GPU

  Can I upgrade my nvidia geforce 750 m on my hp envy 17-j185nr. I know in most cases, you can't, but I need to know

  Hello

  Unfortunately no, there's no slot on the Board to allow the connection of a gpu.

  Kind regards

  DP - K