How to find the constant effective dielectric?

Similar Questions

• How to find the last pasted paragraphs FMP?

  I'm sticking FMP several objects at once in a file (a file of changes to the sections containing the changebars) in the main text flow. I want a separator line to go at the end of each pasted section, so I try to insert one after the paste operation. But instead of a line between each section, all lines are added at the end of the file, after all the sections. So if there are 3 glued sections at the end of the file are three lines. My code is below, do you know how I could fix this?

  Thank you, Mark

  function copyPasteChanges (doc, chgRange) {}

  Select the section with changebar and copy it.

  doc. TextSelection = chgRange;

  doc. Copy();

  Prepare for the changes doc and paste there the modified section.

  var firstChgPgf = changesDoc.MainFlowInDoc.FirstTextFrameInFlow.LastPgf;

  var changesTloc = new TextLoc (firstChgPgf, Constants.FV_OBJ_END_OFFSET);

  var changesTRange = new TextRange (changesTloc, changesTloc);

  changesDoc.TextSelection = changesTRange;

  changesDoc.Paste ();

  To go at the end of the file again (I think)

  var lastPgf = changesDoc.MainFlowInDoc.FirstTextFrameInFlow.LastPgf;

  var dividerPgf = changesDoc.NewSeriesPgf (lastPgf);

  var TLoc = new TextLoc (dividerPgf, 0);

  changesDoc.AddText (TLoc, '_');

  }

  Hi Mark,

  The problem is that the dough does not occur when you think. The dividing line is added at the end of the file, but are not your actions of dough. Actually, I think that maybe a little random where pasta is produced, because this line:

  var changesTloc = new TextLoc (firstChgPgf, Constants.FV_OBJ_END_OFFSET);

  .. .is does not create a valid text location. You can check this by abandoning the service after:

  changesDoc.TextSelection = changesTRange;

  .. and look at where's the insertion point. It will probably be everywhere where you left it last, because the call is not valid. I can't tell you exactly why, except that it has something to do with the fact that you are using the last paragraph in the stream. There is something weird to try to define a range of full-paragraph text with the last paragraph. I'm sure it's related to how the last TFP in a stream does not show a mark of FMP, but beyond that, I don't know how to do what you're trying to do with the last paragraph.

  Having no knowledge of how do it right, any time I need to do this, I create a paragraph "dummy" at the end of the flow to fill that space strange 'last FMP", then do the work around it. In the end, I just want to remove fake TFP. I don't know if it's a good idea or not, but it's the only way I ever get it to work and it sorts the mirror how you could do this manually in the GUI.

  With this, I modified your script as follows, and it seems to work better. Note that I also modified the logic of how to find the last paragraph of the flow by writing a separate function. Your call to the 'FirstTextFrameInFlow' is OK, unless your doc begins to span several pages and/or begins with several empty pages. The function I wrote ensures that you really the last TFP in the stream.

  I hope this helps.

  Russ

  function copyPasteChanges (doc, chgRange) {}

  Select the section with changebar and copy it.

  doc. TextSelection = chgRange;

  doc. Copy();

  Prepare for the changes doc and paste there the modified section.

  var lastPgf = getLastPgf (changesDoc);

  var dummyPgf = changesDoc.NewSeriesPgf (lastPgf);

  var changesTloc = new TextLoc (dummyPgf, 0);

  var changesTRange = new TextRange (changesTloc, changesTloc);

  changesDoc.TextSelection = changesTRange;

  changesDoc.Paste ();

  To go at the end of the file again (I think)

  Don't forget that last TFP is now fake TFP

  lastPgf = getLastPgf (changesDoc);

  var dividerPgf = changesDoc.NewSeriesPgf (lastPgf.PrevPgfInFlow);

  var TLoc = new TextLoc (dividerPgf, 0);

  changesDoc.AddText (TLoc, '_');

  dummyPgf.Delete ();

  }

  function getLastPgf (doc)

  {

  textFrame var is doc. MainFlowInDoc.LastTextFrameInFlow;

  var lastPgf = textFrame.LastPgf;

  While (! lastPgf.ObjectValid () & textFrame.ObjectValid ())

  {

  textFrame = textFrame.PrevTextFrameInFlow;

  lastPgf = textFrame.LastPgf;

  }

  Return lastPgf;

  }

• How to find the page contains the indesign sdk?

  PLS, someone help me, how to find the page contains the indesign sdk?

  Thank you

  screen410099

  Don't know, if you find a shorter way, but it works:

  UIDRef language = YOUR_TABLE;

  Error result code.

  do

  {

  InterfacePtr textModel;

  TextIndex beginning;

  Len Int32;

  result = table_get_text_model (read, 0, 0, textModel, start, len);

  If (result! = kSuccess) break;

  If (! textModel) break;

  UIDRef frameRef = text_query_frame (textModel, start);

  If (! frameRef) break;

  Int32 pnum = - 1;

  PageRef UIDRef = page_getref (frameRef, &pnum);)

  If (! pageRef) break;

  :

  :

  } While (false);

  //***************************************************************************

  Error code (Table_get_text_model)

  Language UIDRef,

  Int32 left,

  top of Int32,

  InterfacePtr & textModel,

  TextIndex & start,

  Int32 & len)

  {

  Result ErrorCode = kFailure;

  do

  {

  Inits

  textModel = InterfacePtr (Nile);

  Start = 0;

  Len = text::kTextLen;

  Make sure that we have a valid table model

  InterfacePtr tableModel (label, UseDefaultIID());

  if(!tableModel) break;

  convert the network to a network ID address

  GridAddress gridAddress (top, left);

  get the container text table so we could make the text template.

  InterfacePtr tableTextContainer (tableModel, UseDefaultIID());

  if(!tableTextContainer) break;

  textModel = InterfacePtr (tableTextContainer-> QueryTextModel());

  if(!textModel) break;

  InterfacePtr tableTextContent (tableModel, UseDefaultIID());

  if(!tableTextContent) break;

  GA GridArea (up, left, top + 1, left + 1);

  Len = tableTextContent-> GetTextChunk (ga, start);

  If (! len) break;

  result = kSuccess;

  } While (false);

  return the result;

  }

  //***************************************************************************

  #if (csversion_<>

  # define ITextFrameC_ ITextFrame

  #else

  # define ITextFrameC_ ITextFrameColumn

  #endif

  UIDRef text_query_frame (InterfacePtr txt, TextIndex istartPos)

  {

  UID uid = kInvalidUID;

  TextIndex startPos = istartPos;

  do

  {

  If (! txt) break;

  INNERE Textrahmen of the items

  InterfacePtr frameList (txt-> QueryFrameList ());

  If (! frameList | frameList-> GetFrameCount ())<= 0)="">

  First INNERER Textrahmen of the items

  InterfacePtr textFrame (frameList-> QueryNthFrame (0) / * QUF,: UseDefaultIID () * /);

  #ifndef (csversion_<>

  Location of RangeData (startPos, startPos);

  #else

  TextIndex location = startPos;

  #endif

  Int32 frameIndex = - 1;

  InterfacePtr tf = InterfacePtr (Nile);

  If (startPos < txt-=""> tf TotalLength ()) = InterfacePtr (frameList-> QueryFrameContaining (location, & frameIndex));

  of other tf = InterfacePtr (frameList-> QueryNthFrame (frameList-> GetFrameCount () - 1));

  If textFrame (tf) tf =;

  If (! textFrame) break;

  //

  Aus dem first inner Textrahmen bilden wir jetzt eine hierarchy.

  In der Ebene uber hierarchy suchen wir jetzt nach nach einem dieser

  Objekt, das ein Graphicrahmen ist. Dieses element ist der gesuchte

  ÄUßERE Rahmen.

  //

  InterfacePtr child (textFrame, UseDefaultIID());

  If (! child) break;

  do

  {

  InterfacePtr parent (child-> QueryParent());

  If (parent == nil) break;

  InterfacePtr graphicFrameData (parent, UseDefaultIID());

  If (graphicFrameData! = nil)

  {

  We have a regular text frame.

  UID =: GetUID (graphicFrameData);

  break;

  }

  child = parent;

  } While (child! = nil);

  } While (false);

  If (uid == kInvalidUID) return UIDRef (Nile, kInvalidUID);

  Return UIDRef (: GetDataBase (txt), uid);

  }

  //***************************************************************************

  #if (csversion_<>

  # define GLayout_:

  #else

  # define GLayout_ Utils ()->

  #endif

  UIDRef page_getref (const UIDRef & frameRef, int32 * pgNum)

  {

  UIDRef result = UIDRef::gNull;

  do

  {

  If (pgNum) * pgNum = 0;

  If (! frameRef) break;

  InterfacePtr itemHier (frameRef, IID_IHIERARCHY);

  If (! itemHier) break;

  If (! pause frameRef.ExistsInDB ());

  ES more like evil EIB GetOwnerPageUID AB. ICH denke badly, at least

  Ein muss ein Rahmen wohl schon haben Parent. Wenn wir da keinen find,.

  tschüss Dann.

  InterfacePtr parent (itemHier-> QueryParent());

  If (! parent) break;

  PageUID UID = GLayout_ GetOwnerPageUID (itemHier);

  If (pageUID == kInvalidUID) break;

  result = UIDRef (frameRef.GetDataBase (), pageUID);

  If (pgNum)

  {

  IDataBase * db = frameRef.GetDataBase ();

  If (! db) break;

  UIDRef docRef (db, db-> GetRootUID ());

  InterfacePtr PageList (docRef, IID_IPAGELIST);

  If (!.) (Break from PageList);

  Int32 pageIndex is PageList-> GetPageIndex (pageUID);.

  * pgNum = pageIndex;

  }

  } While (false);

  return the result;

  }

  //***************************************************************************

• How to find the current MovieClip

  Hello

  I create a flash file to display the products.

  Images and Product Details are stored in the XML file.

  Is what I'm trying to create something similar to the banner on http://www.gainfeeds.com/home

  Add to this is that products are going to be right scroll to the left automatically if there is no user interaction, and produced at the Center will remain highlighted.

  I created a long strip of coverage of products with a mask, the long strip continues to move give a scroll effect.

  Now my question is how to find the product that is currently at the center of the mask?

  
  Thank you.

  Alok Jain

  No there is no default name assigned to them.

  If you take the parent video clip and with for you apply a getChildNum() method, do not exactly know the syntax, you can take the children of the parent in sales responsibilities. 0,1,2,3,4,... etc.

  But this isn't something that will help a lot because you don't know what this number is.

  For example, when you create the child movieclips, xml-based, I assume you are using a statement. So in this statement when creating each movieClip, fi do you something like "var m:MovieClip = new MovieClip();"also do the following"$m.name ="mc"+ i". ""

  You want to do this because the name "m" is valid only as long as the scope of the valid function is. Once the training starts again you loose any reference to the old "m" and a new one is created. So for future reference the movieClips outside the function that creates, you name them.

  After that you can call from anywhere (given that you set the path to access the parent corectly) like this: "parentMovieClip.getChildByName("m3")" If you want to target a third, or using any name you give in the creation of statement.

• How to find the ANGLE b/w two edges in Oracle Spatial

  How to find the ANGLE b/w two edges on Oracle Spatial. I have two edge connected on the same node. I wanted to know the angle betwwn them. Can someone help me?

  Ok. My first example is an approximation. Further you get North or South of the Ecuador, gets the more vague.
  This one should do the trick with some degree of precision.

  declare
    PI constant number := 3.14159265358979;
    g1 sdo_geometry;
    g2 sdo_geometry;
    g3 sdo_geometry;
  
    angle1 number;
    angle2 number;
  
    FUNCTION POINT(P_LAT  IN number
                  ,P_LONG IN number)
      RETURN MDSYS.SDO_GEOMETRY IS
    BEGIN
      -- we load both the ordinate array and the point type because some spatial functions show inconsistent behavior
      -- it is not important for this example, just something to be aware of
      return(mdsys.sdo_geometry(2001,8307 -- WGS84
                               ,mdsys.sdo_point_type(p_long,p_lat,null)
                                                    ,mdsys.sdo_elem_info_array(1,2,1)
                                                    ,mdsys.sdo_ordinate_array(p_long,p_lat)));
    END;
  
  begin
  
    -- For the example, project in WGS84
    -- g1,g2,g3 could also come straight out of the database as sdo_geometry
    g1 := point(50, 7);          -- Point A
    g2 := point(51, 7);          -- Point B
    g3 := point(50,10);          -- Point C
  
    angle1 := atan2(g2.sdo_point.x - g1.sdo_point.x,
                    g2.sdo_point.y - g1.sdo_point.y);
    angle2 := atan2(g3.sdo_point.x - g1.sdo_point.x,
                    g3.sdo_point.y - g1.sdo_point.y);
  
    -- depending on rotation and where we are on the planet, adjustments may be needed
    if angle1 < 0      then angle1 := angle1 + 2 * PI; end if;
    if angle2 < 0      then angle2 := angle2 + 2 * PI; end if;
    if angle2 < angle1 then angle2 := angle2 + 2 * PI; end if;
  
    dbms_output.put_line('Angle between the lines A-B and A-C: '||
                         round(sdo_util.convert_unit(angle2-angle1,'Radian','Degree'),1));
  end;
  

  Angle between the lines A-B and A-C: 90
  

• says that there is an update of firmware available for my 3 t time capsule. I get "an error occurred when downloading". How to find the problem?

  I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3

  Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• I make new the old id must paasward wen apple id I go passward, says your id or passward not at even I have received emails but get no email how to find the solution, I, m stuck wat to do

  I make new the old id must paasward wen apple id I go passward, says your id or passward not at even I have received emails but get no email how to find the solution, I, m stuck wat to do

  Have you tried to reset it in security issues? If you are not able to do so, contact Apple support so a security identifier Apple Advisor can help you. 800-275-2273.

• How to find the date item was my favorites on Mozilla Firefox

  on system moot bookmark how to find the date of the bookmark?

  In bookmarks menu select organize bookmarks to open the bookmarks library. In the bookmarks library, click views, and then display the columns and then added. This will display a column showing when a bookmark has been added.

• How to find the owners of icloud id?

  IM new to this thing from icloud, I bought 3 old ipads2 on a flea market, where unlocked 2 but we have icloud, the screen is not the old owner alone info [email protected], I don't have a problem, try contacting the owner, but how to find the id of owner? even if is a stolen ipad that I'll be more than returned gad, or ask the owner to remove icloud, but without the owner info is difficult, any advice will be apreciated, thanks

  You can not find it. Go back on the market and claim a refund for the iPad.

  (140442)

• NB200 - how to find the 3G module for it?

  Hello

  Pls how I find the 3G module in my NB200 - PLL20E?

  Thank you

  Hello

  What do you mean exactly?
  You want to upgrade your NB200 with a card 3G?

  If yes then you must make sure that your NB200 could be improved using this card.
  I'm not sure if this is possible.

  But don t give up boyfriend Toshiba authorized service partner in your country could provide details.
  Guys might be able to tell if this is possible and could provide a good 3G module

  If you get more details please share with us!

  See you soon

• How to find the yahoo flickr Photo password used to download photos from the Photo app?

  I have 151 000 pictures on Flickr that were loaded from Iphoto, then more recently the Apple Photo app on my imac.

  I can't open a session using a browser because the browser (Chrome) has lost the password of his records.

  How to find the password that the Photo is using app?

  You can not extract the code to access from iPhoto or Photo. I could go to the Web of Flickr site and see what password recovery options they offer for your account.

• How to find the webcam on my hp g56122us note windows 7

  How to find the webcam on my computer vision g56122us hp laptop? I can't get my webcam so I can make a video or take a picture. I have no idea how to do so that he could appear on my screen

  Hello
  
  Please use it to check & difficulty:
  
    http://support.HP.com/us-en/document/c02452221     
  
  Links for XP & Vista are here also.
  
  Good luck.

• How to find the velocity of an incremental encoder

  I use the RE22I encoder which can give up to 8192 pulses per revolution, I have A, B, Z reports that I use an fpga as a controller Please help me.

  How to find the speed of the encoder using these signals I'm going to have a clock in the fpga sysytem will help.

  Start by looking at the information on Wikipedia on the rotary encoders and a book on encoders OR white.  These articles will give you a basic understanding of the encoder and the signals it produces.

  With proper decoding, you can get the direction and momentum of each of the points on your encoder 8192.  If the tree can reverse (same vibration on one point unique all-in-mnearly stationary), full decoding must be used.  If data are only of interest while the tree turns in a direction and speed will not close to zero, a simple decoding can be used.  Decoding of a quadrature encoder is a good way to learn to use a state machine.  Signals A and B can exist in only four possible combinations, but the possible transitions to do interesting things.

  Define DECODING is a purely logical exercise and it is a simple coding in LabVIEW, such as a state machine.  There are examples, Desing Patterns, or project templates (depending on your version of LV) that come with LV to help you get started.

  By using the channels A and B you can update your calculation of velocity 8192 times per turn.  With the help of Z you get only an update by the revolution. You use depends on your application.  The pulse of Z is also useful to define a reference position for the measurement of phase angle.

  Lynn

• How to find the number of data items in a file written with the ArryToFile function?

  I wrote a table of number in 2 groups of columns in a file using LabWindows/CVI ArrayToFile... Now, if I want to read the file with the FileToArray function so how do I know the number of items in the file. during the time of writing, I know how many elements array to write. But assume that I want the file to be read at a later time, then how to find the number of items in the file, so that I can read the exact number and present it. Thank you all

  Hello

  I start with the second question:

  bytes_read = ReadLine (file_handle, line_buffer, maximum_bytes);

  the second argument is the buffer to store the characters read, so it's an array of characters; It must be large enough to hold maximum_bytes the value NULL, if char [maximum_butes + 1]

  So, obviously the number of lines in your text tiles can be determined in a loop:

  Open the file

  lines = 0;

  While (ReadLine () > 0)

  {

  lines ++;

  }

  Close the file