ActiveX (MintController): Error 1057 after liaison with driver

Similar Questions

• Error 80070005 after installation of driver update

  From: surfer100

  I've lived (literally) six laps with HP support chat, try several ways to uninstall and reinstall, also without success.   They practically abandoned.

  The resolution of the monitor is fine... but I can't use all of its features, because the display software will not work.

  Then, suddenly, automatic update of windows offered this update driver... which will not be installed.

  Then... I suspect that the problems are related.

  Any ideas or suggestions are welcome.

  From: surfer100

  I found that disable the program data execution prevention in Vista, lets now HP my display software works correctly!

  I turned Data Execution Prevention on OFF, execept for essential windowsservices by going to control panel, click System, click on the system protection, click on the Advanced tab, click settings, click data execution

  Prevention tab and then click "turn on DEP for essential Windows programs...". »

  This problem of HP my display software does not, as well as several other programs began only a few months ago. So I guess that a security update changed the DEP for always on for everything... so if any program would run is not "compatible" with DEP it does not work... and the error message

  will not tell you!

  Another response of the community of Windows Vista discussion groups

• Pe10 wont run after installation with drives...

  I bought the program from B & H, the disks arrived packaged correctly etc.

  Installed directly upward on a windows xp media addition. A 1 T disc hard dual pentium Dell five year... current enforcement PE6 until recently with no real problem.

  After installation, click the PSE10 and get the flashlight windows bit responsible research for the program, and next to make statement it yourself with a button "eyebrows".

  Used to uninstall right click gives a message... wrong file or paths...

  Could it be in the heart of the problem? I'm not a computer scientist... just a user... so any advice must be in simple English... Thank you! Steve B.

  Hi Steve B,.

  Did you manage to correctly uninstall the application when you tried? Also, did you try to look for the application in the Add / Remove Programs list as suggested earlier.

  You try to launch the application from the shortcut icon on your desktop? Try to find the application in your list of programs and check if you have the same problem when you launch it from there.

• Error message "" serial number entered is valid, but calling it a product irritate lies on this computer "appears." Cannot reinstall CS5.5 on my macbook pro after that hard drive crashed and was replaced.

  Error msg "the serial number you entered is valid, but cannot find a product calling on this computer" appears. Impossible to reinstall CS5.5 on Macbook pro after the hard drive crashed and was changed.

  Hello

  Thank you for your response. I've finally managed to connect with a support staff through the online chat portal & advises him to download CS3 web premium. Tried to find it, but this option is not available in scrolling to the bottom of the box. Ultimately, the staff had to help me to unlock the CS5.5 update manually from its end. He indicated that, in my case, the situation could not be resolved through this method, and I'd still have to contact support via the portal chat staff to help unlock my CS5.5 If this problem occur again should I need to reinstall it on a new computer laptop.

• I am not able to connect on all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton.

  Hello, I'm not able to get online at all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton. The system is slow or bottleneck at all, but I think that the registry has taken hostage by this Trojan horse. I tried to run Add ons, reset IE8, reinstall IE8 offline, I tried different users, tried to run a different browser (firefox). I can ping all the sites in the cmd prompt, but have no luck connection in the browser. A ran mohamed, superspyware, spybot. Is that what I can do without having to re install? I don't have the OS XP Media.

  original title: error 404 on all sites

  I wouldn't worry IPSec.

  I think the most important things to address are:
  1 search for rootkits.
  2 empty the DNS.
  3 reset the proxy settings.
  4 reset the TCP/IP and Winsock settings.
  Good luck!

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• Acrobat pro v12 DC closes with error "closing" after its launch.

  Acrobat pro v12 DC closes with error "closing" after its launch. Reinstalled and still got the error.

  Error 1402. Error 1406. Adobe Acrobat, Reader

• I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Y at - it something I can do.

  I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Is that what I can do to get rid of the message. The message reads "a problem has been experienced while trying to send information on the internet.

  Hi philh76405255,

  I'm sorry for the inconvenience caused.

  Please refer to the following solution: -.

  (1) find the file acrobat.exe on your computer. Right-click on the program and click "troubleshoot compatibility". Set the compatibility of the operating system installed on your computer.

  (2) if it asks you to register several times, please refer to this doc. KB: easier to register several times. Acrobat 8 | Windows

  That might solve your problem.

  In case if you have still any question, please let us know. We will be more than happy to help you.

  Kind regards

  Nicos

• On macOS Sierra - Parallels Desktop 12 - error unable to load Parallels driver - error ID 352

  I have updated at 10.12 some weeks ago, with no problems.

  I used 10 Parallels and put Windows 7 access every day. My Mac software was 100% up-to-date.

  After a few weeks, I started Windows and Parallels showed the error "Failed to load the driver" and KB Parallels, I found that I may need to upgrade. As I was planning to upgrade anyway, I upgraded to Parallels 12 and got the same error.

  I contacted Parallels support - they responded with this:

  Failed to load Parallels driver. Problem ID: 352

  Cause

  The problem is in the bundle /System/Library/Extensions/IOPCIFamily.kext from Apple. In the bundle's info.plist is damaged due to some reasons.

  Resolution

  If please contact Apple Support team and send them system.log and corrupt /System/Library/Extensions/IOPCIFamily.kext/Info.plist.

  The person wrote that if Apple can't help, we will try to help "."

  Is anyone able to help please?

  Thank you.

  It is a user to user forum, not a team of Apple Support forum. In any event, it sounds like a problem of Parallels as it is unlikely that multiple versions of the operating system have defective or damaged kernel extensions.

  For what it's worth, I use Parallels 11 without problem on macOS Sierra to access Windows 2000, Windows XP, Windows XP64, Windows 7 and Windows 10 of virtual machines. I think you should go back to parallels Support. I've avoided Parallels 12 because of all the problems users are reporting

• Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

  I had a HARD drive error.

  So I formatted the hard drive (after trying for months to get the process to finally finish that)
  Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

  I searched the net and found nothing of use!
  Help, please

  see you soon
  Nick

  Hello

  You need to create the own recovery in the past disc!
  This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

  In case you have not created this disk, it is possible to order this support:
  http://backupmedia.Toshiba.EU/landing.aspx

• Beats Audio Control Panel has been removed from my PC after update audio driver.

  Pavilion dv7-6052er (Windows 7 x 64). Beats Audio Control Panel has been removed from my PC after update audio driver.
  Tried to reinstall manually with 6.10.6345.0 version (http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe) and another randomly chosen by some. Nothing has worked.
  My actions:
  1. remove the driver and its software.
  2 restart the computer.
  3 Windows Installer some driver after reboot (I can't disable or cancel installation)
  4 reinstall the driver.
  5 restart my computer.
  Just after the start of Windows driver trying to implement something else (or to continue installation), but it causes an error: _Error: Error = error Undefined...
  Tried to do without step 2 - to reinstall the driver right after having been deleted - without success.
  Tried to remove the driver and then restore an old via Recovery Manager - Beats audio control panel is displayed but there is no sound at all!
  I think I tried all possible combinations of actions. Beats Audio Control Panel works without noise and noise without BACP. But never together.
  Please help me with some advice. Thank you.

  Hey guys! Tried once more to remove the driver and install it with the Recovery Manager. Don't know how, but this time it worked.

  In fact I've disappointed with HP updates, won't be tester for you. I'm tired of these bugs after updates (utility Cool sense, Beats Audio etc.).

  Turn off automatic updates on my PC, seems I don't need your "improvements".

• HP Envy 120 printer prints OK but the error message after each document

  After upgrading the firmware in my printer, I now get a window pop up with the title, "Unable to communicate with printer" at the end of each document.  The error message should be cleared before the next document in the queue will print.  Each document prints correctly despite the error message.

  Another thing that may cause this condition besides the update of the firmware is this: I have set up my printer for wireless printing, which worked OK.  However, I am currently using the printer with a wired USB connection.  Of course, the version non-reseau of the printer is selected as my printer 'default' regarding this error report.  The update of the firmware was held at the same time that change this "setup".

  Hey @rrbNevada,

  Welcome to the Forums of HP Support!
  
  I understand that your printer HP Envy 120 seems to have an error "Unable to communicate with the printer" after each print job is printed and this problem seems to have started after an update of the firmware running and change your connection type. Maybe it's a coincidence.

  For me to help you I need to know what operating system you print since?

  What is my OS?

  For now, I would like to run the print tool HP and doctor Scan. It is a practical tool that will 'fix print' questions automatically for you. It will scan the computer for any conflict of driver printer HP, connection problems and other issues that can cause problems with your printer. It will also try to fix these problems for you.

  HP Print and Scan Doctor

  If printing HP and doctor Scan fails to solve your problem, I recommend a complete uninstall and reinstall of your software and drivers for a clean slate to work with.

  Uninstalling the printer software

  After you have uninstalled the drivers and the printer software I need you to reinstall. To reinstall, I add two documents of reference below:

  Installation for USB under Mac OS X

  Installation of USB on Windows

  Because you use the printer for network and USB connections on your computer I suggest you first run installation from USB.

  Once the printer is installed for USB, then you can add in the wireless version.

  Adding a printer wireless on Windows:

  1. open the Printer Assistant software on your desktop. It should resemble a black printer icon and has your options of Scan inside.

  2. click on the 'utility' on the top tab

  3. click on 'software and configuration of the printer.

  4 enforce "connect a new device" for the network connection.

  This will add two copies of your printer and both will be implemented properly for scanning and printing.

  Adding a printer wireless on Mac:

  1. Click The HP utility icon in the Dock.

• Alpine Ski 2007 gives the error "ERROR in LOADING X 64 DRIVER. YOU FORGOT TO RESTART? »

  Alpine Ski 2007 gives the error "ERROR in LOADING X 64 DRIVER. YOU FORGOT TO RESTART? "I have restart after the installation of the program on Windows 7 for a Dell PC. The demo version has worked on this computer, but after buying the DVD, it doesn't. I tried all the switches compatibility under properties, but nothing works. Thanks for any help.

  Hello SQUARKMAN,

  I did a little research, trying to determine the compatibility with Windows 7. It doesn't seem to be compatible, since its last update compatible with Windows 2000/XP shows.

  You could try running in compatibility mode, or if you have the XP mode, you can try to run in there also determine if you have better success.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CanoScan 88ooF error report, "cannot communicate with scanner.

  When I try to use my scanner I get the error report, "cannot communicate with scanner, make sure it is plugged and truned on.» When I go into Windows Device Manager I can see it, and when I click on the buttonn properties, it says that the device is functioning properly. I downloaded the latest version of the software driver etc and I uninstalled and re installed again but I still get the same error report.

  I use Windows 7, 64-bit version.

  

  Above is I get the error message.

  After two days of fruitless efforts, I found my own solution. I downloaded and installed VueScan x 64 and it works a treat. I think that the problem I've been is due to the fact that the scanner driver is 64-bit and the programs that install are 32-bit, even if the scanner driver works perfectly fine 2 bit programs do not see.

• HP5520 - an error occurred during communication with the scanner

  A HP5520 for a few months and all were working well. But today does not scan wireless.

  I'm on a Mac OSX 10.9.2 imac and have reinstalled just the last bundle of driver on the HP website but no joy. The HP scanning utility will show the printer in the list, but throws up this error message:

  "HP Photosmart 5520 series-AirPrint is currently unavailable. Please check if it is connected and turned on, or try again later. »

  If I try to connect through system preferences printers and Scanners it throws up to the following error:

  "Year error occurred while communicating with the analytical engine."

  Any ideas?

  Don't worry, I've now solved with a stop down / reboot everything after you have reinstalled the drivers. I think that, maybe, last week cut off was to blame reboot on the mac has rebooted without the scanner is powered and the scan of the computer had not been activated. A restart of the mac corrected it.