How to find the RAM available on ESXi host 5.5

Similar Questions

• Should the RAM for an ESXi host replaced the same ones remaining?

  Hello

  We are running a cluster of servers ESXi 5.1 - 2 of them are Xeon E7440 2.4 GHz (64 GB of RAM) and 1 of them is Xeon X 5460 3.16 GHz (32 GB of RAM).

  Currently, the use of the memory of all three ESXi hosts are about 60%.

  We will replace the Xeon X 5460 server with a new physical server.  We would like to ask for your opinion how much RAM you must order (my manager of door on the cost of the new server).

  Thank you

  Hi again Tony,

  1. No, it is not high at all. You should begin to worry about this, after reaching approximately 85-90%.
  2. My short experience with clusters of memory-unbalanced, adding that more memory would be a lot like the DRS manages memory locations & 'kindness host' in the right direction, but I'm not really sure how that would turn out in the long term. If you decide to present more memory to your server, it would be possible to upgrade the other two guests sooner than later
  3. Yes, ask the seller would be the right thing to do. Please note that you will need to put in place an enhanced vMotion to conform to your next "older" CPU then, because you'll have something other than X 5460. I guess you'll have to "intensify" a generation or two, depending on what you have found.

• How to get the material status of ESXi host of external surveillance system?

  Hello!

  I've got hardware ESXi host information (for example, CPU, disk, etc.)

  that I want back outside a vCenter/ESXi for an external monitoring system.

  I really really slighty possible via Powershell saw...

  Thanks for your help!

  Hello

  the link that I commented, explian how to monitor the status of the ESXi hardware by using the cmdlets for powershell CIM 3.0.

  Not the virtual machines

  This, will you?

  Check this code from the link, you should notice that connects to an esxi host, not virtual machines:

  import-moduleCimCmdlets

  2	$ipaddress="10.20.177.15"

  3	$HostUsername="root"

  4	$CIOpt= New-CimSessionOption-SkipCACheck -SkipCNCheck -SkipRevocationCheck -EncodingUtf8-UseSsl

  5	$Session= New-CimSession-Authentication Basic -Credential $HostUsername -ComputerName $Ipaddress -port 443-SessionOption$CIOpt

  6	Get-CimInstance-CimSession$Session-ClassNameCIM_Fan

  Best regards

  Pablo

• How to recover the license of discommissioned ESXi host?

  On the web, my understanding is that when we stop the host ESXi, the license will be available for the vcenter Server.  However, the license is not released.

  Is there any step that we missed?

  Your opinion is requested.

  Thank you

  Judgment of the host is not enough.

  You must remove the host to vCenter as well.

• says that there is an update of firmware available for my 3 t time capsule. I get "an error occurred when downloading". How to find the problem?

  I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3

  Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.

• Qosmio F30-125 - how to upgrade the RAM?

  Hello

  I have a model PQF30E Qosmio and who seek to increase the RAM.

  I read that this model can take 2 GB max as opposed to the PQF32E which can take 4 GB.

  I have the standard 512 MB installed at the moment and when I open the back I have only a slot for expansion. Should I put a 2 GB upgrade in this slot I can not find a 1.5 GB upgrade or is it possible to delete the original 512 and replace with2 x 1 or 1 x 2 GB.

  Thank you
  Ben

  Hi mate

  What boarder said is right.
  The user manual provides information on the possible RAM upgrade and there is also an instruction how to put the RAM in the slots.
  Usually it s not difficult and can be done very quickly.

  View just the words to the subject of the upgrade of RAM max;
  It's material and limited to Intel chipset limitation.
  If you want to know how much RAM is possible then check your type of chipset and visit Intel for chipset details.
  In the datasheet, you can find the specifications of the chipset.

• How to find the CPU Microcode Patch review?

  G ' Day,.

  According to the next VMware KB:

  KB.VMware.com/.../Search.do

  Revision of the CPU Microcode Patch must be updated to version. Does anyone know how to find the Model CPUID (Stepping) installed processors and Microcode patch review there?

  R630 host running ESXi 5.5.

  BIOS version 2.1.5.

  Kind regards

  Alex.

  Dell has just released new bios for FC630, R630 that updates the firmware

• A torn my sticker with the serial number. How to find the number of the whole installation?

  Best regards, tore my sticker with the serial number. I don't see the numbers. How to find the number of the whole installation?

  Original title: windows 7 sn

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

• How to find the size of the virtual server?

  Hello

  We intend to pass our applications 4 virtual servers has 2 physical servers. In this process, we need to identify the size of the current virtual servers to use as a starting point to configure or add the size in physical server. can anyone provide information on whats stats to be noticed and how to find the size of the current virtual servers?

  Thank you

  Hi Sekhar, there.

  in general, it is a fairly complex task if you want to size the new platform correctly, i.e. not to oversize it and have very low use below, i.e. spend too much on equipment.

  In fact, it's the first thing to consider the level of use of the new platform. Most likely your organization (HW and infrastructure) has targets to a minimum. optimal and maximum usage levels.

  In the case where you do not have this as a starting point, and then you continue with load average and the current peak (CPU, RAM, NW). To these basic lines, you can use the statistics of WLS Admin Console, where the use of CPU and memory statistics are presented since the server was last started. For more detailed statistics, you can use WLDF to capture measures key at regular intervals, and then base your analysis of these data.

  Finally and above all, the size of FS, but I've seen some comments above related to the size of the FS.

  HTH,

  A.

• How to find the dynamic inside the af acomponent ID: foreach?

  Hi friends,

  Jdev: 11.1.1.7

  I have a requirement like I need a list of books available as links. So I posted using af: foreach and inside I used af:goLink.

  I need to display the ToolTip on mouseover this link. To display the ToolTip, I used the popup. How to find the dynamic ID inside the af: foreach in java.

  If I bind the comonent, it does not work inside foreach.

  Try this way, root.findComponent("r1:it2"); it is in taskflow. On popufetchlistener you call a method to get the id of the component to get the book desc.

  Thank you

  Hello

  You can probably assign a customer attribute for elements and then using that you could get the values?

  Check out https://docs.oracle.com/cd/E21764_01/apirefs.1111/e12419/tagdoc/af_clientAttribute.html and http://jdevadf.oracle.com/adf-richclient-demo/faces/components/clientAttribute.jspx

  Arun-

• Can I change the RAM available on a virtual machine without having to reboot?

  I would like to know if there is an option to change the RAM available on a virtual machine without restarting the virtual machine. I saw this old news item that says that it is

  possible (http://news.cnet.com/8301-1001_3-10044031-92.html), but I don't know how to do it. Any suggestions?

  Thanks in advance.

  Arne post, called PowerCLI: toggle the function add Hot VMs, shows how.

• How to find the child level for each table in a relational model?

  Earthlings,
  
  I need your help, and I know that, "Yes, we can change." Change this thread to a question answered.
  
  So: How to find the child level for each table in a relational model?
  
  I have a database of relacional (9.2), all right?
  

  .
       O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
      /↑\ Fks
     O"O O" <-- level 2 for first table (circle)
    /↑\ Fks
  "o"o"o" <-- level 1 for middle table (circle)
     ↑ Fk
    "º"

  Tips:
  -Each circle represents a table;
  -Red no tables have foreign key
  -the picture on the front line of tree, for example, a level 3, but when 3 becomes N? How is N? That is the question.
  
  I started to think about the following:
  
  First of all, I need to know how to take the kids:

  select distinct child.table_name child
    from all_cons_columns father
    join all_cons_columns child
   using (owner, position)
    join (select child.owner,
                 child.constraint_name fk,
                 child.table_name child,
                 child.r_constraint_name pk,
                 father.table_name father
            from all_constraints father, all_constraints child
           where child.r_owner = father.owner
             and child.r_constraint_name = father.constraint_name
             and father.constraint_type in ('P', 'U')
             and child.constraint_type = 'R'
             and child.owner = 'OWNER') aux
   using (owner)
   where child.constraint_name = aux.fk
     and child.table_name = aux.child
     and father.constraint_name = aux.pk
     and father.table_name = aux.father;

  Thought...
  We will share!
  
  Thanks in advance,
  Philips
  
  Published by: BluShadow on April 1st, 2011 15:08
  formatting of code and hierarchy for readbility

  Have you looked to see if there is a cycle in the graph of dependence? Is there a table that has a foreign key to B and B has a back of A foreign key?

  SQL> create table my_emp (
    2    emp_id number primary key,
    3    emp_name varchar2(10),
    4    manager_id number
    5  );
  
  Table created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create table my_mgr (
    2    manager_id number primary key,
    3    employee_id number references my_emp( emp_id ),
    4    purchasing_authority number
    5* )
  SQL> /
  
  Table created.
  
  SQL> alter table my_emp
    2    add constraint fk_emp_mgr foreign key( manager_id )
    3         references my_mgr( manager_id );
  
  Table altered.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1   select level lvl,
    2          child_table_name,
    3          sys_connect_by_path( child_table_name, '/' ) path
    4     from (select parent.table_name      parent_table_name,
    5                  parent.constraint_name parent_constraint_name,
    6                  child.table_name        child_table_name,
    7                  child.constraint_name   child_constraint_name
    8             from user_constraints parent,
    9                  user_constraints child
   10            where child.constraint_type = 'R'
   11              and parent.constraint_type = 'P'
   12              and child.r_constraint_name = parent.constraint_name
   13           union all
   14           select null,
   15                  null,
   16                  table_name,
   17                  constraint_name
   18             from user_constraints
   19            where constraint_type = 'P')
   20    start with child_table_name = 'MY_EMP'
   21*  connect by prior child_table_name = parent_table_name
  SQL> /
  ERROR:
  ORA-01436: CONNECT BY loop in user data
  

  If you have a cycle, you have some problems.

  (1) it is a NOCYCLE keyword does not cause the error, but that probably requires an Oracle version which is not so far off support. I don't think it was available at the time 9.2 but I don't have anything old enough to test on

  SQL> ed
  Wrote file afiedt.buf
  
    1   select level lvl,
    2          child_table_name,
    3          sys_connect_by_path( child_table_name, '/' ) path
    4     from (select parent.table_name      parent_table_name,
    5                  parent.constraint_name parent_constraint_name,
    6                  child.table_name        child_table_name,
    7                  child.constraint_name   child_constraint_name
    8             from user_constraints parent,
    9                  user_constraints child
   10            where child.constraint_type = 'R'
   11              and parent.constraint_type = 'P'
   12              and child.r_constraint_name = parent.constraint_name
   13           union all
   14           select null,
   15                  null,
   16                  table_name,
   17                  constraint_name
   18             from user_constraints
   19            where constraint_type = 'P')
   20    start with child_table_name = 'MY_EMP'
   21*  connect by nocycle prior child_table_name = parent_table_name
  SQL> /
  
         LVL CHILD_TABLE_NAME               PATH
  ---------- ------------------------------ --------------------
           1 MY_EMP                         /MY_EMP
           2 MY_MGR                         /MY_EMP/MY_MGR
           1 MY_EMP                         /MY_EMP
           2 MY_MGR                         /MY_EMP/MY_MGR
  

  (2) If you try to write on a table and all of its constraints in a file and do it in a valid order, the entire solution is probably wrong. It is impossible, for example, to generate the DDL for MY_EMP and MY_DEPT such as all instructions for a table come first, and all the instructions for the other are generated second. So even if NOCYCLE to avoid the error, you would end up with an invalid DDL script. If that's the problem, I would rethink the approach.

  -Generate the DDL for all tables without constraint
  -Can generate the DDL for all primary key constraints
  -Can generate the DDL for all unique key constraints
  -Can generate the DDL for all foreign key constraints

  This is not solidarity all the DOF for a given in the file object. But the SQL will be radically simpler writing - there will be no need to even look at the dependency graph.

  Justin

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• I make new the old id must paasward wen apple id I go passward, says your id or passward not at even I have received emails but get no email how to find the solution, I, m stuck wat to do

  I make new the old id must paasward wen apple id I go passward, says your id or passward not at even I have received emails but get no email how to find the solution, I, m stuck wat to do

  Have you tried to reset it in security issues? If you are not able to do so, contact Apple support so a security identifier Apple Advisor can help you. 800-275-2273.

• How to find the date item was my favorites on Mozilla Firefox

  on system moot bookmark how to find the date of the bookmark?

  In bookmarks menu select organize bookmarks to open the bookmarks library. In the bookmarks library, click views, and then display the columns and then added. This will display a column showing when a bookmark has been added.