How to find the right order VMDK is the drive Linux
Hey, guys!
I have a small question.
We have a VM DB with 5 SAN disks presented to it. 1 disc and 4 drives of 2 TB system.
I for example list of Linux operating system drives:
Disk/dev/sda: 214.7 GB,
Disk/dev/sdb: GB 2199,0
Disk/dev/sdd: GB 2199,0
Disk/dev/sdc: GB 2199,0,
Disk/dev/sde: GB 2199,0
And also see these disks attached to the virtual machine in VMWare vSphere Client.
How I could find on what disc correspond to which Linux operating system drive?
Thank you!
Please take a look at http://kb.vmware.com/kb/2020458 to see if that's what you're looking for.
André
Tags: VMware
Similar Questions
-
Pavilion dv6-7025tx: how to find the driver for my hardware
Operating system: Microsoft Windows 7 (64-bit)
Product name: HP Pavilion dv6 - 7025tx Entertainment PC
Product number: B3J88PA #AB5
Motherboard: Hewlett-Packard 181st
Chipset: Intel HM77 (Panther Point)
BIOS: 29/05/2014 worm. F.2BSI installed an SSD and a clean Windows 7. I started to download the drivers from the site when I found that there are too many drivers for the same hardware, for example under network, there are 9 drivers of Intel, Broadcom, Ralink, Realtek, and Atheros.
How can I find the driver for my PC?
This says it all. Each device has a unique ID of the signature or of the device:
If you find the device ID and google it you can find what it is. My own laptop, I have an Intel Dual Band AC 7260 wireless card and this is the device ID:
PCI\VEN_8086 & DEV_08B2 & SUBSYS_C2708086
So find a string like that for each device and it will tell you the manufacturer and chipset of each device and let not find you the driver to install. If you find several drivers for the device even look at dates of issue of the drivers and only install the most recent.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
How to find the driver of modem of Toshiba Satellite U305-S7432 for Suse operating system?
Hello friends! I have laptop Toshiba Satellite U305-S7432. I use the Suse operating system. But my OS couldn't find the modem driver. Where can I find the driver of modem for Suse OS? How can I solve this problem. Please help me. ?:|
Best regards. ;)
Hey Buddy
Unfortunately, it seems that Linux is not supported by Toshiba and so there is no Linux drivers published on the page of the driver.
If you need some drivers, I would recommend looking at the sites of chip manufacturing.
But visit these Internet sites about Linux on Toshiba laptops:
http://newsletter.toshiba-tro.de/main/index.html
http://www.Linux-on-laptops.com/Toshiba.html
Welcome them
-
How to find the drive assigned to ASM diskgroup
Hi all
I created some ASM disks and do not know if I attributed to a diskgroup. Please may I know how to find the disc by ASM diskgroup or free on the disk that can be used.
Thank you.Hello
You must make reference to:
http://download.Oracle.com/docs/CD/B28359_01/server.111/b31107/asmdiskgrps.htm#CHDIBGGH
If you scroll down a bit you'll find: "groups example 4-3 look at a disk with associated disks.You can also check more specifically:
http://www.Stanford.edu/dept/ITSS/docs/Oracle/10G/server.101/b10755/dynviews_1019.htmHTH,
Thierry -
ANYONE ABLE TO WALK THROUGH WHERE TO FIND THE DRIVER FOR PRINTER HP OFFICEJET 7310? I LOST INSTALLATION CD YEARS.
Hello:
You can download the driver from the link below...
This download includes the HP Photosmart and Officejet Software Suite (advanced imagery and product functionality) and driver.
File name: AIO_CDB_Net_Full_Win_WW_140_408 - 5.exe
-
How to find the drive to extend if you have 20 disks the same size?
Hello world
I have a windows 2008 r2 VM and there 20 disks of the same size. All the disks are on a single data store vmdk disk.
How you would recognize expand/remove disk if necessary?
Please see captured images attached, properties of the disk to the Disk Manager does no idea.
If the disks are not formatted in the order how you'd find?
ID target or logical unit number tells you nothing
Thank you
VM-> parameter change > click on the hard drive > Virtual Device Node SCSI (0:1) must correspond with
My computer-> Select Drive property-> hardware > Bus 0, target ID 1
-
How to find the driver for HUAWEI cell phone Pocket
How to install a driver for HUAWEI cell phone.
http://www.huaweidevice.com/worldwide/Downloadcenter.do?method=index&type=software
Check your model number of countries and device -
How to find the driver for usbav-190
product; Instant VCD USB by technology announcements
Hi SajuKurian,
Download drivers for USBAV-192.
http://www.adstechnologies.com/index.php?Main_Page=page&ID=13
If this does not work contact ADS Technologies.
http://www.adstechnologies.com/index.php?Main_Page=contact_us
-
Can someone tell me where to find the driver of 4145B pls?
Hello world
I'm new here. And I'm working on communication with LabVIEW and 4145B now. Can someone tell me how to find the driver for it?
Thank you advance.
Chris
Use tools > Instrumentation > find instrument Drivers or go to the Instrument Driver Network. This page also has information about what an instrument driver is and how to use a.
-
How to find the right server to use windowsmail to send and receive e-mails?
How to find the right server to use windowsmail to send and receive e-mails?
Who is your current e-mail server? (Which is after the @ in your address).Windows Mail: Setting up an account of end-to-end
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish -
How to find the child level for each table in a relational model?
Earthlings,
I need your help, and I know that, "Yes, we can change." Change this thread to a question answered.
So: How to find the child level for each table in a relational model?
I have a database of relacional (9.2), all right?
Tips:. O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */ /↑\ Fks O"O O" <-- level 2 for first table (circle) /↑\ Fks "o"o"o" <-- level 1 for middle table (circle) ↑ Fk "º"
-Each circle represents a table;
-Red no tables have foreign key
-the picture on the front line of tree, for example, a level 3, but when 3 becomes N? How is N? That is the question.
I started to think about the following:
First of all, I need to know how to take the kids:
Thought...select distinct child.table_name child from all_cons_columns father join all_cons_columns child using (owner, position) join (select child.owner, child.constraint_name fk, child.table_name child, child.r_constraint_name pk, father.table_name father from all_constraints father, all_constraints child where child.r_owner = father.owner and child.r_constraint_name = father.constraint_name and father.constraint_type in ('P', 'U') and child.constraint_type = 'R' and child.owner = 'OWNER') aux using (owner) where child.constraint_name = aux.fk and child.table_name = aux.child and father.constraint_name = aux.pk and father.table_name = aux.father;
We will share!
Thanks in advance,
Philips
Published by: BluShadow on April 1st, 2011 15:08
formatting of code and hierarchy for readbilityHave you looked to see if there is a cycle in the graph of dependence? Is there a table that has a foreign key to B and B has a back of A foreign key?
SQL> create table my_emp ( 2 emp_id number primary key, 3 emp_name varchar2(10), 4 manager_id number 5 ); Table created. SQL> ed Wrote file afiedt.buf 1 create table my_mgr ( 2 manager_id number primary key, 3 employee_id number references my_emp( emp_id ), 4 purchasing_authority number 5* ) SQL> / Table created. SQL> alter table my_emp 2 add constraint fk_emp_mgr foreign key( manager_id ) 3 references my_mgr( manager_id ); Table altered. SQL> ed Wrote file afiedt.buf 1 select level lvl, 2 child_table_name, 3 sys_connect_by_path( child_table_name, '/' ) path 4 from (select parent.table_name parent_table_name, 5 parent.constraint_name parent_constraint_name, 6 child.table_name child_table_name, 7 child.constraint_name child_constraint_name 8 from user_constraints parent, 9 user_constraints child 10 where child.constraint_type = 'R' 11 and parent.constraint_type = 'P' 12 and child.r_constraint_name = parent.constraint_name 13 union all 14 select null, 15 null, 16 table_name, 17 constraint_name 18 from user_constraints 19 where constraint_type = 'P') 20 start with child_table_name = 'MY_EMP' 21* connect by prior child_table_name = parent_table_name SQL> / ERROR: ORA-01436: CONNECT BY loop in user data
If you have a cycle, you have some problems.
(1) it is a NOCYCLE keyword does not cause the error, but that probably requires an Oracle version which is not so far off support. I don't think it was available at the time 9.2 but I don't have anything old enough to test on
SQL> ed Wrote file afiedt.buf 1 select level lvl, 2 child_table_name, 3 sys_connect_by_path( child_table_name, '/' ) path 4 from (select parent.table_name parent_table_name, 5 parent.constraint_name parent_constraint_name, 6 child.table_name child_table_name, 7 child.constraint_name child_constraint_name 8 from user_constraints parent, 9 user_constraints child 10 where child.constraint_type = 'R' 11 and parent.constraint_type = 'P' 12 and child.r_constraint_name = parent.constraint_name 13 union all 14 select null, 15 null, 16 table_name, 17 constraint_name 18 from user_constraints 19 where constraint_type = 'P') 20 start with child_table_name = 'MY_EMP' 21* connect by nocycle prior child_table_name = parent_table_name SQL> / LVL CHILD_TABLE_NAME PATH ---------- ------------------------------ -------------------- 1 MY_EMP /MY_EMP 2 MY_MGR /MY_EMP/MY_MGR 1 MY_EMP /MY_EMP 2 MY_MGR /MY_EMP/MY_MGR
(2) If you try to write on a table and all of its constraints in a file and do it in a valid order, the entire solution is probably wrong. It is impossible, for example, to generate the DDL for MY_EMP and MY_DEPT such as all instructions for a table come first, and all the instructions for the other are generated second. So even if NOCYCLE to avoid the error, you would end up with an invalid DDL script. If that's the problem, I would rethink the approach.
-Generate the DDL for all tables without constraint
-Can generate the DDL for all primary key constraints
-Can generate the DDL for all unique key constraints
-Can generate the DDL for all foreign key constraintsThis is not solidarity all the DOF for a given in the file object. But the SQL will be radically simpler writing - there will be no need to even look at the dependency graph.
Justin
-
How to find the absolute position of the end of the text, it can be one or more,
How to find the absolute position of the end of the text, it can be one or more,
in the position I need to inseart the image of the size of the font that it friendly ordinary view sequiential - image as custom image
Please help us find the position of the text, and even for a function more, I demanded the conclusion the text length
I want to do we will be right and the other will be left how I can I align is their way to find the width of the label or text?
Thank you
This should help align your labels layouts, depending on what you did you do could go with absolute layout, docking station or stack (allows you to align the top to bottom or left to right)
I'm not too sure that everything, however, to determine the length of the text, I would think that you could store the text in a string and then somehow programmatically count each letter & do return a result... not exactly on how to do it but it's an idea
-
gamepad work on some games, but some don't. How to fix? where can I find the driver? I want it to work like a xbox 360 gamepad, mines look like a playstation controller 2, its a pc gamepad heres link http://www.amazon.com/gp/product/B00IYEZUD6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 sqdeal I want to play a game called microvolts, but game do not see the gamepad even when you use the game software xpadder. S W A D do not work. How to make it work?
Yes, thanks (NOT) to monopoly$ oft, most default games to the XBOX controllers these days.
-There were several updates of XInput , who fixes for controllers that were compatible with
XBOX several years ago.
I do not exactly remember, but they are either through Windows updates 'important' updates, or
the DirectX Web Installer, updater DX-
Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center
-The game should not have to recognize the controller. If the profiling software that comes
That's all good it will emulate a keyboard.
If the profiling software that comes with your controller cannot create a profile for the game
which allows the stick or d - pad to function as the WSAD keys, you will need to ask at the support
site for the mfg of the controller.
Or, if you're lucky, here, someone can have experience with this brand controller.
I had no problem in WSAD orders for games with my Logitech "dual action".
the game controller software.
I think that the new Logitech controllers, for example. - F310, identify the buttons and sticks of the same
as an XBOX controller and can play most of the games which by default XBOX without using third-party software.
.
-
How to find the path of a file
Hello
I have Windows 7 Starter.
The search utility can be used to search for files by using the ' * ' wildcard, but unfortunately it does not show the path for no results.
I would like to know how to find the path of a file of my choice.
For example, I record a radio on the internet, which is then saved as "MP3". Now, I want to edit such a file, but I need to know where the file is actually stored. Simply access within a 'library' does not show me where the file is actually located.
How to discover all paths where a particular file format?
I hope to receive a response to this request.
Kind regards
Rayt333
An option for the search utility see the paths for all of its results, would be useful.
Hi Ray
Overall view for the search folder for Detailsof Windows Explorer , by using the View Menu on the right side of the toolbar.
Click on the last name column heading and select the folder item.
If you do not see the folder item, click other, scroll and select the folder item. This will add the folder column.
Use the left mouse button to drag the folder column to the left, next to the column name .
Now, when you perform a search, the folder column will show the path of each file found.
Concerning
-
How to find the location of a file or folder in windows 7
I have a few games on my computer. I can't find the location of the original file for them however. What I find is that they are in the 'games' folder that is included with windows 7. However, the whole files are not there. Only a little bit of information for the game is stored here. What I need to know is: how to find the original location? I tried the search bar "search programs and files" under the start menu, but the only place that appears is the Games folder. I need to know this, because I want to try modding my game called "Civilization 4. Can you please help?
Try this...
Start button > in the search box, type the name of the gam, i.e. of Civilization 4 > (do NOT press enter) > top left corner, you see the name "Civilization 4 '?
If so, right click on it > click Open File Location > the game exe file show be on the highlighted list > right click it > click on create a shortcut.
Happens to you?
-
How to find the track of the script of the Controlfile Correct .trc file in /bdump
Hi guys
It's more childish requests in this forum...
I want to know how to find the correct trace file when we question change database trace at sqlprompt to create controlfile script backup controlfile.
As I find it a little confusing to go through the same day & .trc files almost even among hundreds of trace file in the directory /bdump to find the right one.
If we find the alert log file in /bdump directory $ ls-al l * & get us the log file alert... If there's a similar way to find the Trace of controlfile script file?
Thanks and greetings
MZHi MZ;
1. as mentioned here to use a BACKUP CONTROLFILE to TRACE AS syntax and give the name and the path that you want to
2. check the alert.log
3. check under bdump using the command ls - lrtPS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding
Respect of
HELIOS
Maybe you are looking for
-
Music Apple IOS 10 on 4G does not work
Hello given that I have upgraded to IOS 10 my Apple music works in WiFi and not on 4G more. When I click 'for you', 'Browse' and 'Radio' I get only an endless LOADING. Restart, reinstall, etc. does not solve the problem. In the settings of data using
-
serious problem with HP support assistant needs to close
Presario SG3-110UK I downloaded an update for Assistant help now some time ago and I get an error "this application has encountered a serious problem and needs to close"-button to close the application or restart. Reboot Gets the same message. I unin
-
Export of database Microsoft Access to Excel
Hai team I have a task which Test reports are entered in Microsoft Access.I'm familiar in the entry of data into the database, the next part of the book is that I should export a particular part of reports to Excel, say to sort the data in a date to
-
All the devices stop, while the computer is unattended.
Recently at random, all devices stop working and I have to manually restart the computer, the mouse no longer responds, keyboard stops and the monitor says there is no signal, I unplugged and restarted all of them and run a scan and Defrag virus. I h
-
I am trying to install a registration program that I downloaded www.n3fjp software developer. I downloaded several times, but now it won't install, it just says: '339 runtime error' \The program is the journal of amateur radio contact.Any help would