How to fix a pc when the monitor receives no signal?

Similar Questions

• How change the default resolution for windows to use when the monitor is not connected

  Hi, how can I set the resolution by default that windows uses when the monitor is turned off or not connected at all? My problem is that normally I use 1920 x 1080, but when I put the pc to sleep or just turn monitor and leave it like that for a while with a few app maximized, when I get back and turn the monitor on the resolution is correct but the enlarged window is resized to 1024 x 786 resolution. I tried to change in the registry DefaultSettings.XResolution a DefaultSettings.YResolution in all instances and it worked fine for a long time. Then some update that happened and now it no longer works. I reinstalled the system, but it still does not. How can I force windows to use always the 1920 x 1080?

  It seems that TMM disabling did the trick. Maximized windows are not yet moved to the left edge of the screen, well, those who have been maximized is maximized correctly as they should. I had to disable TMM through registry as I had no MMR in Task Scheduler.

  If anoyone is interested I've followed the instructions described here:

  http://superuser.com/questions/120983/how-to-disable-monitor-auto-detection-in-Windows-7

• windows program will rearange themselves when the monitors are in mode 'sleep' - how to stop windows switching screens

  IV has 3 screens on a map via display port adapter and a 4th on a second card in order to have a 1 on top of three parameters.

  the computer itself does not sleep because I have servers running but I put screens on standby after 10 minutes.

  for a long time, all screens would go to sleep and wake up without any problems... in the course of the last months, 2 questions.

  1. once the monitors to sleep and no consistent time 1 monitor wakes up enough to show the backlight, but no display... wake up ok and sometimes screens dislocated.

  and

  2 when the monitors have the power save / standby mode, some of the Windows I had open will have been moved to different monitor as monitors have been disconnected or "detected" numbers have changed and I saw the change number several times as well, but not always.

  I say some because I have 4 windows open on my left most monitor and 2 of them end up on my right monitor after the glitch.

  Sometimes things on my low Center {main} will end up on the top of the single monitor page.

  no rhyme or reason... a few days no problem at all don't wake up and everything is where it should be and all the screens have slept through the night

  for all the tech info

  ATI 5750 and 5770 in mode xfire w / 1displayport/DVI / HDMI/DVI 1 / 1 DVI.

  and ATI 5450 to the top of the monitor page

  Windows 7 x 64 / 8 core AMD8320 / 16 gig mem.

  latest video drivers...

  any info?

  I'm a tech and iv been scratching my head for a while on this one

  thnx in advance for reading even to see my problem

  thnx even more for an answer... lol

  Hello

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• How to fix a webcam showing the photo upside down trying to Skype?

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  How to fix a webcam showing the photo upside down trying to Skype?

  Hi obafemiosinnowo,

  In version 5.5.0.2340, clicking once on your image in the toggle image size of the PIP of the size of the thumbnails to slightly larger and back. This behavior is identical to the Windows version 5.8.0.156.

  However, unlike the version of Windows in Mac version once your PIP in the largest size there is no method, by dragging the corners, etc., to resize the additional PIP. The result is that the PIP is too small, even in the larger of the two sizes available

  Community.Skype.com

  https://support. Skype.com/.../how-do-i-change- the -picture- in-a-group

  https://JIRA. Skype.com/browse/SCM-958

  https://support. Skype.com/.../How-do-I-update

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• Adobe Application Manager corrupt - are trying to install the new copy will fail because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  Adobe Application Manager is corrupt and allows a reinstallation try Fail Adobe Acrobat Pro XI - try to install the new copy of the AAM fails because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Build Version - 9.0.0.244

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Exploitation forest verbosity level set to 4

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | CREATING Instance PIM...

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Detected db journal file, Adobe Application Manager is in a State damaged to C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Adobe Application Manager is needed to solve this problem. However, it is missing or damaged.

  Download a new copy of Adobe Application Manager of http://www.Adobe.com ,

  or re install this product.

  06/04/16 16:23:29:507. [FATAL] |  | USS | The installation program. The installation program.  |  | 6256 | Cannot create the PIM item

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "986b04a2-3099-49fd-9067-df69c36ff2b2."

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "e5f02581-649c-49ec-a265-800eeb5ad426."

  Does anyone have an idea what to do? I use Windows 7 as operating system

  Hi Ruedigerd91465945,

  Well try download and install Adobe Application manager from here: Adobe - Adobe Application Manager: For Windows: Adobe Application Manager: thank you

  Before installing kindly, restart the machine and then rename the folder in C:\Program Files (x 86) OOBE \Common Files\Adobe\OOBE\PDApp as OOBE_OLD

  Let us know if that helps.

• How to validate an entry when the focus leaves the intensity absorbed in

  How to validate an entry when the focus leaves the intensity absorbed in a form?

  "Ansury" wrote in message
  News:garo90$L71$1@forums. Macromedia.com...
  > Not AFAIK. Event.Target has a reference to the object that sent the
  > event. In livedocs:
  >
  > "Every event object has a goal and a currentTarget property that help."
  > you
  > Hold where it is being spread. The target
  > property
  "> return to the sender of the event."
  >
  > BUT...
  > Your if statement will never evaluate true because you compare one
  > UITextField to a TextInput. A UITextField (stored internally in a
  (> TextInput, it makes the text) actually dispatches the event.

  currentTarget gives you the object on which the event actually listener
  attached to...

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• How to fix error "connection to the server has expired"?

  I'm having the same problem, as shown here: https://support.mozilla.org/en-US/questions/1068987

  From today I get [email protected] server connection timed out ' error.
  

  I was running v31.x, so I've updated to 38.x but I; m until the question.

  -Two separate IMAP e-mail accounts are defective; both are MediaTemple email accounts; No config has changed; I am able to access recent messages via iPhone and through the webmail interface.
  -J' restarted Thunderbird in safe mode, but that did not help.
  I checked the password and any other standard "is it plugged in?" the kind of things
  -I went to the configuration editor and brought up delays in mailnews.tcptimeout, mail.server.server1.timeout, etc. all at 300, no help here either

  Any ideas how to fix?

  colinjohnston said

  I'm having the same problem, as shown here: https://support.mozilla.org/en-US/questions/1068987

  From today I get [email protected] server connection timed out ' error.
  

  I was running v31.x, so I've updated to 38.x but I; m until the question.

  -Two separate IMAP e-mail accounts are defective; both are MediaTemple email accounts; No config has changed; I am able to access recent messages via iPhone and through the webmail interface.
  -J' restarted Thunderbird in safe mode, but that did not help.
  I checked the password and any other standard "is it plugged in?" the kind of things
  -I went to the configuration editor and brought up delays in mailnews.tcptimeout, mail.server.server1.timeout, etc. all at 300, no help here either

  Any ideas how to fix?

  Update: [solved]

  Although everything else about my internet connection worked perfectly well, I suspected that maybe this question was related to the other oddities that I experience with my Comcast DOCSIS modem. I restarted the modem and without timeouts more in Thunderbird. Again, I didn't have no other question similar with connectivity, but my IMAP authentication uses port 993, and there was something stuck on the subject through my connection. Maybe this info will help some people to solve the problems they are the way out of this problem.

• How to control automatic shutdown when the battery is discharged using Windows

  The laptop stops right in the Middle something without notice.

  Even after that I formatted the system, he still stops automatically when the battery is low, without advising me of either the low battery status or the judgment.

  I don't think that the cause of the problem is the power management because it is set to balanced.

  How can I control when the pc stops?

  Hello

  Usually, you can change these settings within the Windows power management.
  Using Win 7 or Win 8/8.1?

  Here is the Nice technical document about the features of Windows 7 power management
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Check the last option called: battery.
  It provides many useful features such as low battery, critical battery level, low battery action or critical battery action

• How to fix his jerky in the Toshiba bluetooth stack?

  Recently, I instaled v8.0.0.12 driver Toshiba Bluetooth Stack on my laptop and got rough sounf on profile AD2P. Driver Toshiba BT Stack v7.10.04 I used, and the sound was perfect.
  I have laptop Sony VGN AR-170 with CSR (19.2) v2.0 + EDR and Windows 7 top controller.
  Do you know how to fix this?
  Will be very grateful for advice.

  If you don t have to Toshiba laptop, you must contact the manufacturer of the laptop computer for support. You use software from Toshiba, but Toshiba has nothing to do with hardware built into your laptop.

  Sorry, but you must contact Sony.

• How to change existing keywords when the site is not in the bookmarks bar?

  I've implemented several shortcuts keyword for sites that I use frequently. Now, how can I change the keywords or URLS when the site is not in the list of bookmarks? Is there a master file Firefox for these access which can be edited by the user? Or another way to get to them?

  Not sure if it's the same on Mac OS x, but it is how it is done under Windows and Linux versions of Firefox.
  
  Bookmarks > organize bookmarks
  
  Highlight the bookmark in the right pane, and then click more at the bottom to see the keywords and Description fields for this bookmark.