How to fix Audio blurred

I filmed a few Interviews on a Canon T3i, using the microphone of the camera. I'm now trying to take the whistle of the background audio and it sounds garbled. Is it possible to take the whistle and keep all the breaths and keep the audio not truncated?

Thank you

MICAH D says:

I filmed a few Interviews on a Canon T3i, using the microphone of the camera. I'm now trying to take the whistle of the background audio and it sounds garbled. Is it possible to take the whistle and keep all the breaths and keep the audio not truncated?

It seems that you may have exaggerated the NR. If it is primarily a hissing sound you want to remove, then take your noise sample highest using FFT it is. Better yet, use three different sizes of the FFT (low, medium, high) and a little out with each. Invariably, you will be able to take a little more out with the highest setting without artifacts, but the lower settings are more usage for certain kinds of noise. The thing about all this is however do not do too much, because that is when the murmur of strange noises and other artifacts to turn up.

Must say however that something you should never be filmed interviews using a microphone mounted on the camera is in abject desperation! You really need a much closer the subject mic! With the best in the world, taking the sounds of your interview will also remove some of the tone of the room and leave you with a voice a bit 'distance' that sounds a bit disembodied, whatever you do; That's what relatively distant micing leaves you with. There really no satisfactory solution to this at all, after the event.

Tags: Audition

Similar Questions

  • How to fix audio and video?

    Yes while watching a video (whether on Youtube, etc.) or a downloaded in Quicktime video format will stop after a minute and the buffer or simply freeze (Note: though it has already loaded or is already on my hard drive!), will be so audio. After 15 seconds the sound plays and the video remains frozen.

    Same thing while listening to music (Spotify or Itunes (both downloaded)), the music will stop randomly. After a few seconds, the music will continue with a whistling noise that fades in 5 seconds approximately.

    It started a month ago, and since then, I have tried several things:

    Reinstallation of Flash

    Update of Flash and any other update like OSx

    My mac to a timemachine image backup

    tried several different browsers

    tried several different wireless LANs (although Itunes etc. do not need those)

    has ran a Virus Scan

    Nothing has done so far. I don't know what to try anymore.


    So my question is:


    This who can I try to fix this? How can I go to find out if it is a hardware problem? Could a factory reset fix, and not not not using a backup, but simply install new OSX?



    Mac Book retina 2014 Version 10.11.2 El Capitan

    Model name: MacBook Pro

    Model identifier: MacBookPro11, 1

    Processor name: Intel Core i5

    Processor speed: 2.6 GHz

    Number of processors: 1

    Total number of cores: 2

    (By heart) L2 Cache: 256 KB

    L3 Cache: 3 MB

    Memory: 8 GB

    Try running diagnostics by following the instructions on the link below and let us know the results.

    OS X Yosemite: use the Diagnostics of Apple or Apple Hardware Test

    I hope you find this information useful.

    Best regards

    Austin

  • How to fix audio skip/excision out / stutter at the end of the guests? Help, please!

    Hello, I really need help.

    I'm working on a podcast of edition and in the audio I'm editing, comments looks on their phone, they questioned and sometimes it seems that audio sound is either ignoring or cut what kind of sounds like a stutter effect.

    Does make sense?

    If someone could help me I would be VERY happy!

    Program - I use Adobe Audition CC 2015.

    Unfortunately you will not be able to fix once it is saved like that. How it was in the first place?

  • How to fix audio problems with some codecs only?

    Dell Optiplex 7010 bought in January, Windows 7 SP1 with all updates.

    Sometimes during the month, I started to notice that some videos audio was very low and others had very distorted audio. This occurs when streaming video during playback of downloaded files and YouTube etc. A few videos where the sound was fine when I downloaded them are now distorted.

    Other records and videos are fine, normal levels, no change by when I downloaded them.

    The problem is not specific to any video site, player or plug-in. I can confirm by playing the same thing on other devices that the problem is not in the stream or file. So it seems that this must depend on which codec is used. This theory is supported by videos from the same source, generally having the same problem, or no problem.

    I updated the Dell RealTek audio drivers, uninstalled them and used the generic Microsoft drivers, installed the RealTek drivers.

    Audio troubleshooting of Windows detects no problem.

    Disable sound effects has no effect.

    Any suggestions on what else to try?

    I guess I should install a 1394 PC card, plug my PreSonus audio interface and see if that has the same problem.

    Here are some examples:

    • normal: https://www.youtube.com/watch?v=CvNGpdPdQCk
    • Audio clean but the level is about 10% of what it should be: https://www.youtube.com/watch?v=gX3jxkozqd8
    • level normal but distorted and voice is unintelligible: https://www.youtube.com/watch?v=eNPeOnsxICw

    Never mind. The problem is in my hearing.

  • My photos - just uploaded to iCloud photo library - are blurred when I open them on my iMac.  Why?  How to fix?

    My photos - just uploaded to iCloud photo library - are blurred when I open in iCloud photo library on my iMac.  I expect but they never sharpened.  Why?  How to fix?  I was not able to determine our a way to fix this despite research for hours on the forums.  For any help or suggestion will be useful, I'm sure!

    Using iMac 21.5 in. (end of 2009), processor Intel Core 2 Duo 3.06 GHz, 4 GB memory DDR3 1067 MHz

    El Capitan 10.11.4 running

    You have the iCloud library enabled and the option to optimize the photos in your local photo library?

    If so you probably watch optimized versions that will be much smaller a not very strong.

  • No Audio output device is installed - how do fix my audio device?

    original title: how to fix my audio device?

    No Audio output device is installed.

    Hi Dasean,

    To reinstall a hardware driver that is not working properly, follow the steps described in this document .

    Let us know if that helps.

  • I'm new to Lightroom CC.  It's always like that?  I click on the button import in the library module.  All the pictures shown in the display of the grid are blurred.  They are very well in simple mode.  My file extension is NAVE.   How to fix?  Any help p

    I'm new to Lightroom CC.  It's always like that?  I click on the button import in the library module.  All the pictures shown in the display of the grid are blurred.  They are very well in simple mode.  My file extension is NAVE.   How to fix?  Any help please.

    Our team is already working on this, and there will be an update to Lightroom soon with previous import window.

    During this time I ask you to please you back to the previous version of Lightroom:Instructions to restore an earlier version of update

  • I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1. Still no sound.

    I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1, but still no sound in clips. Not even on the old files that are used to work.

    Bfun

    What operating system is running your first items 12/12.1? Can we assume that this audio reads OK

    on the same computer when you use a computer independent of Premiere Elements drive?

    What are the properties of these clips that have worked before, but don't know regarding sound

    For now, I will assume that you are working on Windows 7, 8 or 8.1 64bits.

    Have you checked the settings change preferences/Menu/Audio ASIO hardware? You have all 3rd party audio devices integrated in your IT environment?

    Please delete the Adobe Premiere elements Prefs file and, if it does not, then all 12.0 folder in which the Adobe Premiere elements Prefs file exists. Is the path to 64-bit Windows 7, 8 or 8.1

    Local disk C

    Users

    Owner

    AppData

    Roaming

    Adobe

    First Elements

    12.0

    and in the 12.0 folder, is the file Adobe Premiere elements Prefs that you delete. If this does not work, then delete all 12.0 the folder in which the Adobe Premiere elements Prefs file exists. Make sure that you work with the Option "Show hidden files, folders and drives" of the current folder so that you can see the full quoted path.

    You have the installation files or the installation disc with the serial number purchased in case we need to use to uninstall/reinstall?

    We will follow your track to the top.

    RTA

  • How to fix firefox layout

    Hello guys,.

    Since yesterday my firefox fonts, no website, I talk on bookmark fonts, icons are past for some reason, because of this growth, now they are blurry.

    In addition, my size of 100% of the site went from some reason also,
    So since yesterday, a regular site was like this:

    http://img197.imageshack.us/img197/8792/mry2.PNG

    Now, 100% of the sites Web looks like this:
    http://img838.imageshack.us/img838/1376/zwul.PNG

    And here are some pictures of my icons and bookmarks and stuff for example text:
    http://img834.imageshack.us/img834/5151/5J6.PNG
    as you can see its large icons and blurred

    Please help me fix this!
    I tried to reinstall firefox and it wasn't working,
    I tried to read this article: http://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently
    and it did not help as well
    Although he spent only since yesterday, while 22.0 version is not the problem.

    I switched to google chrome because of this annoying problem and I want to go back to firefox.

    Thanks in advance,
    Daniel.

    refer to

  • How to fix the microphone in Compaq Presario R3000

    Original thread title - how to fix the microphone in Compaq Presario R3000?

    Hello
    I have a laptop Compaq Presario R3000, and I tried to use Skype on it. Problem is that the other end can't hear me. I tried all the suggestions on the site of Skype to try and attach the microphone.  I tried the recorder (click programs, accessories, then entertainment to access), but when I record my voice, nothing, so I guess it has something to do with the microphone. Just to be sure - this model has an internal microphone? What I've read, it seems that it does. I downloaded the updated drivers, so I don't think that's the problem. Any suggestions? I'll try anything now, because I spent about 6 hours online trying to get the microphone to work and so far, nothing. Thank you! Patti

    Hello

    1. What problem is only on Skype?

    2. were you able to use this microphone earlier?

    3 have there been any changes made on the computer before the show?

    4. what operating system are you using on your computer?

    I suggest you to consult the steps mentioned below and check if it helps.

    Run the troubleshooter of sound recording
    Click on the link below and run the troubleshooter.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

    See the following Help article.

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    If the problem persists, then I suggest you to contact Skype to get help.

    https://support.Skype.com/

    It may be useful

  • I have a Hp and the micro build does not work how to fix this?

    Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

    Hello

    Check with HP, their drivers support and documentation online and ask in the forums about known issues.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ========

    It's probably the pilots who are responsible and who may not really be later or they need to be
    re-installed anyway. The best way is to manually review using the methods below.

    References to Vista also apply to Windows 7.

    Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
    Audio definition (this is an example and you can have an other name/maker).

    Write the description and the model double click on it - tab drivers - write down
    Version. Now click on update drivers who cannot do anything as MS is far behind certifying
    drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
    stack.

    You can have the default windows or a former certified pilot and it's all or part of the
    issue.

    Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
    where you put - right-click on Reboot - RUN AS ADMIN-

    Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
    and then install the latest version. Restart and check after each test, not
    rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
    installed shows upward on the tab of the driver.

    Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
    operating mode. Download - SAVE - go to where you put them - click on - RUN AS
    ADMIN - Reboot

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check see the
    Disconnected devices and show disabled devices - check your micro - highlight
    then on lower right properties. Make sure that the appropriate injector is selected and check
    other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change
    .

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
    in Windows XP (or Vista)
    http://support.Microsoft.com/kb/973446

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I want to add the music that I downloaded on the internet Director of windows but it says missing a codec? Whats that and how to fix it?


    I want to add the music that I downloaded on the internet Director of windows but it says missing a codec? Whats that and how to fix it?


    I want to add the music that I downloaded on the internet Director of windows but it says missing a codec? Whats that and how to fix it?

    ================================
    What is the (extension) format of the music files?

    Several audio formats are apparently compatible with
    Movie Maker, but the most reliable is WMA.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • blue screen of death wake mode 'sleep' how to fix?

    I get a blue screen of death to the awakening of fashion 'sleep' how to fix?

    ==================================================
    Dump file: 040515-21762 - 01.dmp
    Crash time: 05/04/2015 14:16:26
    Bug Check String: IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x0000000a
    Parameter 1: 00000000'00000000
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000001
    Parameter 4: fffff800'02c8e8ec
    Caused by the driver: ntoskrnl.exe
    Caused by the address: ntoskrnl.exe + 74ec0
    File description: NT kernel & system
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7601.18741 (win7sp1_gdr.150202 - 1526)
    CPU: x 64
    Plant address: ntoskrnl.exe + 74ec0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\040515-21762-01.dmp
    Number of processors: 8
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 276 192
    Dump of file time: 05/04/2015 14:17:28
    ==================================================

    BA

    You can, but until you get the new driver and install it, you don't have to.  A new write more old.

    For the future to uninstall a driver, you go into the Device Manager.

    Start > Search > type Device Manager > click on the device you want to the right of the update (in this case audio devices) click > uninstall.

  • Since iOS recent upgrade to my 5s my battery drains too quickly.  How to fix this problem?

    I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly.  It never happened until this update.  How to fix this problem?

    Hello kellyfromrexford,

    I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s.  To determine what application or process affect the life of your battery, take a look at the information in these resources:

    On the use of the battery on your iPhone, iPad and iPod touch

    Maximize the life of the battery and battery life

    Take care.

  • friends air grille iPad blushed. any ideas how to fix

    Hi my friends iPad air 2 has suddenly had a red screen, it was not dropped or damaged, any suggestions how to fix it.

    Hey Timothy,.

    Please use Apple Support communities to get help for your friend. I can see your post iPad friends Air 2 is a red screen but has not dropped or damaged. Having a job to display on your device is essential and I'd be happy to help you get it working again. If your friend has already tried, they should perform a forced reboot. These steps are in the link below.

    Restart your iPhone, iPad or iPod touch

    If this does not get the iPad screen to display normally, then we you will get it looked further at an Apple Retail Store or Apple authorized service provider. Your friend can locate one close to them with this link here: find

    We are here to help.

    See you soon.

Maybe you are looking for