How to fix RunDLL winofw32.rom?

Similar Questions

• How to fix Rundll errors at startup caused by WildTangent

  Hope you can help me with this.  I use XP and whenever I start my computer, I get a message that says WildTangent Rundll error module is not found.  This gets really annoying...  I tried using msconfig and uncheck the box that I thought was the cause of the problem.  The message has disappeared, but the computer obviously wasn't working properly after that.  Anyone has any ideas on other things I can do.  I did a system restore and the message reappeared.

  Hello

  I followed your instructions exactly and has competed only auturuns scan.  I unchecked the box that mentioned Wild Tangent, and when I restarted my computer, the message didn't come.  Thanks to you, it seems that the problem is solved, finally.  I can't thank you enough.  I really think you need to be a genius!

  Thanks again.

  Sincerely,

  Joanne

• How to fix RunDLL error message: C\window\system32\sshnas21.dll

  When my system I noticed a pop message "load error: C\window\system32\sshnas21.dll" on my screen. Please help me solve this problem. Is it because my system has a virus .please help.

  Hello

  Yes

  It is malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and if the problem persists you may need to remove it from the startup procedure

  try this program for that

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to fix error rundll on high tower dell with vista

  How to fix RunDll error on startup of dell with Windows vista laptop.

  Hello

  you do not give the exact error message

  Try this

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• How to fix code 39 for cd/dvd-rom readers

  How to fix code 39 for cd/dvd-rom readers

  Here the answer
  
  Error 39

• What does "error code 39, the device, / Device/CdRom0, has an average of bad block and how to fix it?

  Original title: that means 'the device/Device/CdRom0 has bad block averaging, and how to fix?

  I can not access my CD-Rom.  I get an error code 39.  Can you help me?

  Depending on the circumstances that generated the error, it can mean one of several different but related things.

  1. The drive itself is a failure [replace the drive].
  2. The media in the drive is not compatible with the firmware of the drive. [Go to the decision-makers in car's web site and see if there is a firmware update for the drive - or - if a burning operation, try different media].
  3. Lead to problems of software or registry issues [go to the Device Manager and remove the player.] Restart Windows to reinstall. Remove the upper/lower case filters in the registry. Instructions available on the Internet. Do a Bing or Google search].
  4. Anisotropic Pseudo-aleatoires variability in the matrix of the error of the universe [restart Windows and try again].

  Tom Ferguson

• How to: reactivate the CD-ROM drive

  Original title: my CD drive has been disabled... have no discount... How do I re - activate?

  My disk drive/cd and dvd rom does not somehow they disabled how to re - enable them without having to buy a new driver

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Since iOS recent upgrade to my 5s my battery drains too quickly.  How to fix this problem?

  I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly.  It never happened until this update.  How to fix this problem?

  Hello kellyfromrexford,

  I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s.  To determine what application or process affect the life of your battery, take a look at the information in these resources:

  On the use of the battery on your iPhone, iPad and iPod touch

  Maximize the life of the battery and battery life

  Take care.

• friends air grille iPad blushed. any ideas how to fix

  Hi my friends iPad air 2 has suddenly had a red screen, it was not dropped or damaged, any suggestions how to fix it.

  Hey Timothy,.

  Please use Apple Support communities to get help for your friend. I can see your post iPad friends Air 2 is a red screen but has not dropped or damaged. Having a job to display on your device is essential and I'd be happy to help you get it working again. If your friend has already tried, they should perform a forced reboot. These steps are in the link below.

  Restart your iPhone, iPad or iPod touch

  If this does not get the iPad screen to display normally, then we you will get it looked further at an Apple Retail Store or Apple authorized service provider. Your friend can locate one close to them with this link here: find

  We are here to help.

  See you soon.

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• How to fix no network service on iPhone 6plus

  How to fix no network service on iPhone 6plus

  Try here > If you can not connect to a cellular or cell - data Apple Support Network

• Hey I lost my ios for my macbook how to fix

  Hey I lost my ios for my macbook how to fix or install ios

  You have a Macbook, but you've posted in the forum for desktop - I asked guests to move it on the forum of Macbook.

  Your Macbook does not run iOS - it is for iPhones and iPads. I guess that say you you have damaged your operating system somehow, OSX - is that correct? This Apple help page explains how to reinstall your system:

  On OS X Recovery - Apple Support

• iCloud cannot sync contacts after 10 updated windows kb3176495 - how to fix?

  iCloud cannot sync after 10 updated windows kb3176495 - how to fix?

  Stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• How to fix my camera back to the iphone 5?

  How to fix my camera back to the iphone 5?

  < re-titled by host >

  Depends on. What's wrong with it? You will need to provide a bit more detail.