How to fix Rundll errors at startup caused by WildTangent
Hope you can help me with this. I use XP and whenever I start my computer, I get a message that says WildTangent Rundll error module is not found. This gets really annoying... I tried using msconfig and uncheck the box that I thought was the cause of the problem. The message has disappeared, but the computer obviously wasn't working properly after that. Anyone has any ideas on other things I can do. I did a system restore and the message reappeared.
Hello
I followed your instructions exactly and has competed only auturuns scan. I unchecked the box that mentioned Wild Tangent, and when I restarted my computer, the message didn't come. Thanks to you, it seems that the problem is solved, finally. I can't thank you enough. I really think you need to be a genius!
Thanks again.
Sincerely,
Joanne
Tags: Windows
Similar Questions
-
How to fix RunDLL error message: C\window\system32\sshnas21.dll
When my system I noticed a pop message "load error: C\window\system32\sshnas21.dll" on my screen. Please help me solve this problem. Is it because my system has a virus .please help.
Hello
Yes
It is malware
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If this does not work in normal mode only the above work in SafeMode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
and if the problem persists you may need to remove it from the startup procedure
try this program for that
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
-
How to fix RunDLL winofw32.rom?
How to fix RunDLL winofw32.rom?
Hello
Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If the error persists after scanning use this program to out startup
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.
-
Registry errors. System hangs. How to fix registry errors?
How to fix registry errors? The registry errors affect the performance of the pc?
My windows crashes often. Bases of installed microsoft security update.Hello
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during ' blue screen of the.
death ' crashes, and displays the information about all crashes in one table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
This utility can be used to check the event log for errors other than a BSOD, many crash
Events will write to the event log.MyEventViewer can be verified at the time of the blue screen (BSOD) within a second
or so from the time of the BSOD for more information on the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that appears
details of all application crashes occurred in your system. The information breaks down
is extracted from the .wer files created by the component of Windows Error Reporting (WER)
the operating system every time that an accident occurred. AppCrashView also allows for the
easily check the list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html==================================================================
These methods can help correct most of the problems of crash.
References to Vista also apply to Windows 7.
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
-
How to fix the error of loading mscoreei.dll files?
I get a message error "C:\Windows\Microsoft.Net\Framework64\v4.030319\mscoreei.dll could not be loaded."
Please let me know how to fix this error?Hello
Thanks for posting your question in the Microsoft Community forums.
I see that you have found an error that c:\Windows\Microsoft.NET\Framework64\v4.030319\mscoreei.dll could not be loaded. "
It seems that the problem is related to the .net framework.
When exactly do you get this error?
Try these steps and check if the problem reappears.
Method 1:
Step 1:
Check if this occurs in safe mode
Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.
Follow this link to start your computer in safe mode with network below.
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-modeStep 2:
If it works fine in safe mode, please perform a clean boot to verify if any third-party application is causing the problem.
Please visit the following link to do the same thing:
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.
Method 2:
You can still run a SFC scan.
The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.
To run a scan suite SFC as follows:
How to use the System File Checker (SFC) to search system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
Download the tool to repair of Microsoft .NET Framework from the following link and try it on your computer.
This tool detects and tries to repair some problems frequently with the installer where with updates of Microsoft .NET Framework.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135
Let know us the results of the suggested steps and let us know if you encounter problems with Windows and we will be happy to help you
-
Hello
Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezesMaleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.
grateful for the help!
Hello
> message: unable to load powrprof, object: CLSD-no-it is found;
In my view, this would mean that there is a problem with Toshiba Power Saver
What laptop Toshiba, you have exactly?Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.
-
How to fix 8024200d error code in vista ultimate sp1
How to fix 8024200d error code in vista ultimate sp1
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates:
http://support.Microsoft.com/kb/836941What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.
When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.someone has a better solution that take care of this problem.Hello
Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:
http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx
Hope the above information is helpful.
-
How to delete RUNDLL error meg in Add or remove programs
How to delete RUNDLL error meg in Add or remove programs
Please submit the full text of the error message without paraphrase.
Please indicate which version of Windows you have, including the service pack (right click on desktop and select Properties, if you do not know).
You get this error when you click Start > Control Panel > Add / Remove programs?
-
RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz".
RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz". I also noticed my cpu runs sometimes very high without running programs. audit in the process, it seems to be the system idle using a lot of cpu. My pc is several years old and think of memory starting to dissapate, I tried to remove the afew channels recently and I was wondering if that has something to do with the error.
Hello
Were there any changes (hardware or software) to the computer before the show?
Method 1: Put the computer to boot and see if it helps.
To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.Note: follow step 7 to reset the computer to start as usual after the boot process.Method 2: Perform the steps from the link below and see if it helps.Method 3:Run a full scan with your antivirus software.Hope this information helps. -
Someone knows how to fix C015001A error code?
Someone knows how to fix C015001A error code? I can't update my computer. It said that windows has not can check the updates. I clicked the windows update in the start menu. It does not work. I'm already the administrator.
Hello
Did you change your computer?
Method 1:
I suggest you to follow the links and check out them.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2:
I also suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
RunDLL error on startup of Windows 7 - specified module could not be found
I get up RunDLL error at startup of Windows 7. The message reads ' there was a problem starting C:\Users\Tom\AppData\Local\Temp\186192434.txt the specified module could not be found.
Then use msconfig to identify the startup entry problem
-
How to fix 0xc000001d error
Hi Gustavo,
It was a problem in the old version of AE with the AMD processor.
But the fix is now available, just update to the latest AE.
Kind regards
Navdeep Pandey
-
Bad job first elements 10.0. I made a flash animation and has decided to add sound in first - Elements.It turned jerks. How to fix this error
Dear Sirs. I ask you to give special attention that the frame rate vidio input and output cannot exclude more than 1 frame, otherwise the image will shake and blurry text. It is preferable to use the HD 720 P 25 sincerely Mikhail Osipov
-
How to fix "an error has occurred when attempting to change modules.
How to fix "an error has occurred when attempting to change modules" on a MAC?
Hi josephh,.
Please see this link for troubleshooting steps: error changing modules
Maybe you are looking for
-
I own a Mac BookPro RD 2015 (after April) with 128 GB of storage. It works very well, but can explain how below the display of storage it ridiculously shows 156,53 GB of Apps and 35 / GB free out of 120,11 GB?
-
Need drivers for Satellite 1860
Model name: Satellite 1860 system unitModel No.: PS186N-09TUD I need Driver XP. Please help me.
-
I have a HP pavilion a 1550 y Im don't know what vid card is in it now. I have 4 GB of RAM and a Pentium D 945 3.4 Ghz installed any suggestions on a video card? Thank you.
-
Adding printer HP to Chromebook
I have a desktop computer with windows 7 operating system installed and a chromebook. I want to install the HP printer photosmart 2410xi which is wired to the desktop. I want to print wireless HP 2410xi. Is google cloud the only way to make an impr
-
Why my attachments function does not work in Windows Live Hotmail?
Original title: why my attachments do not work? I have problems with getting documents to include as an attachment. Never had this problem with hotmail before. What I am doing wrong? How can I find someone to HELP me?