How to fix Vaio Care blocking when creating recovery discs?

Similar Questions

• USB stick not recognized when creating recovery disc in Windows 8.

  Original title: Recovery Media Creator prblem

  Hello-I have a desktop K430 Lenovo with a 1 to HDD, Win8 64 b, 12 GB of memory. I'm trying to create a recovery disc using a flash drive HP with 32 GB. I bought a 2 GB Tech Universe that should do the job, but the Recovery Media Creator suggest 16 GB.

  I installed USB Flash Drive 32 GB HP which is identified as HPv125w (F): the computer and selected for how to manage the unknown data or take any Action. I formatted the Flash Drive ENF to match my file system. I also chose computer /Devices removable and open as portable devices in the hope that the flash player would be recognized by the Recovery Media Creator, but it didn't happen.

  I run the following command to create a Recovery flash drive:

  Control Panel/All Control Panel Items/Recovery/create a recovery disk/copy the recovery partition from the pc on the recovery drive (I checked this assertion). I clicked NEXT to continue the process.  I was instructed to connect a USB and the reader must be able to contain at least 16 GB. He also said that everything on the disk is deleted. Identity of the flash player (HPv125w (F) does not appear on the page of recovery media and THEN is grayed out. I need help with this problem.  After checking the Microsoft Community, I learned that I could use search from the start page or opening of office and enter recoverydrive.exe and make appear the Recovery Media Creator. I performed this task once again, but I got the same results, as shown above. Thanks in advance.

  Hello-I have a desktop K430 Lenovo with a 1 to HDD, Win8 64 b, 12 GB of memory. I'm trying to create a recovery disk

  Identity of the flash player (HPv125w (F) does not appear on the page of recovery media and THEN is grayed out. I need help with this problem.

  You can also try using diskpart to his list volume control just to compare his view of this device.

  BTW, there is another user of Lenovo, who tries something similar but without keyboard to help...

  http://social.technet.Microsoft.com/forums/IE/en-us/04e45c11-b5c0-48b0-AB58-3f96a1040e40/how-to-restore-Windows-8-from-a-recovery-USB-on-a-Tablet-Wo-physical-keyboard

  I think that it may actually be further ahead than you?    ; )

  Good luck

  Robert Aldwinckle
  ---

• How to reinstall Vaio Care without recovery

  After a HARD drive crash I had to install Win7 fresh on a new drive.  (Recovery CD was corrupt).  Has attempted a recovery / Reset factory via F10, but failed w / error 320 (which means the disk failure - perhaps since the recovery partition has been cloned from a HDD failure?)   So, how I reinstall Vaio Care & Imagination Studio s/w w/o a recovery partition?  Model SVE15115FXS.

  Hi Sriracha89,

  Unfortunately we do not have a way to extract the specific application of your recovery disk.

  Thank you
  Sean

  If my post answered your question, please mark it as "accept as a Solution.

• How can I continue creating recovery discs?

  Hello! I just bought a HP Pavilion dv6-3011so, and told me to create recovery discs as soon as I had installed the computer. I read in the manual that I stopped the creation and that the next time I opened the Recovery Manager he asked me to continue and to insert the following DVD and so on.

  As it was getting late, I decided to stop creating and continue the next day (today), and I opened up to Recovery Manager. He didn't ask me to keep anything. I Googled it and couldn't find any information, not even on the HP website. I don't know if I should choose "Creating recovery discs" once again, but I think it will only begin to calculate how much Swedish I will need? Or it will not start calculating where I was when I interrupted the creation yesterday (I had just finished disc 2 of 6)? I don't want to do anything until I know for sure I do the right thing, because I feel that this can never be done again.

  Please help me!

  Hello

  If you restart recovery disc creation, it should carry from where you left off.

  Best wishes

  DP - K

• Satellite L655 - missing file when creating recovery media

  Hello

  I just bought two new Satellites a L655-1EM and a L655-17V (I think - pink and red). In any case I tried to burn some media of recovery - which I find a little cheapo, making do us it ourselves!

  During the process, he said there is a lack of file and hangs on. I tried this on the machines and the same result. I use discs double layer. Any ideas? Do Toshiba shell on a disc of recovery in such circumstances - I already DL three frisbees lol.
  I'm more than worried a little, as if something bad happens I have no confidence that I will be able to recover.

  Some tips/advice?
  Thanks in advance :)

  Hello

  Have you ever tried 4.7 GB standard DVD?

  I used the Verbatim DVD-R 16 x 4.7 GB speed to create recovery discs and it worked correctly. I t n have no problem. The discs I've tested without any problem.

  You can test this please?

• Creating recovery disc for the VGN-NW220F laptop

  I followed the instructions and got the on-screen Vaio Care, but under "Recovery and restoration", there is no option to create recovery discs.

  When I clicked on your link to Vaio Care, I was taken to the Vaio Update options. I tried to install all of them, without success.

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Possibility of creating recovery discs isn't available.

  I want to create recovery disks for my HP Pavillion 2260 - EA, Windows 7 64 bit, but the option is no longer available in my HP support Assistant. I selected the option once, but had to cancel because he wants more DVD discs I've owned. I then bought several discs. Now the option is no longer available for me to choose.

  In my view, we can only create recovery discs once. The PC noted, therefore, that I used this option, when in fact I've never really done. Can I do now?

  -Mike

  Hi, it is possible Action Center of this HPSA saw this task as completed and this is why it is not.  I recommend that you try to access the Recovery Manager through the start menu. If you select all programs from the start, you should see a list for safety and Protection, click on that and then click on Recovery Manager and finally, you should see a list for the creation of recovery media. Clicking on that brings you to the creation screen.

  If for some reason that there is no option, the only solution I know of "reset" of the option of creating media is to perform a recovery of HP sent a recovery media. Performing a restore partition recovery will not work.

  Hope this information helps. If you need help, please ask.

• How to set the HostDiskPartitionAttributes property when creating Vmfs volume

  Hi all

  When creating vmfs datastore through vlume

  programmatically, I need to partition the vmfs volume. here my question

  is an idea how to set the HostDiskPartitionAttributes there is a

  parameter to create vmfs vloume. Here I use Vdisk lun san

  "that will have the size, raid, stripesize... by this I need to set this.

  HostDiskPartitionAttributes ' property.could someone help me please. "

  Note: it's links to the document:

  http://www.VMware.com/support/developer/VC-SDK/visdk25pubs/ReferenceGuide/index.html

  is the method that you need to find CreateVmfsDatastore.

  Thank you

  As partition is a contiguous series of blocks on a disk that is marked to be used and is considered in each sector of 512 bytes. Must divide the space into sectors and specify startSector and endSector according to your requirement, that the way in which large partition you want to create.

• How to fix error code 8024402F when upgrading from windows

  When I update my windows vista, an error occurs saying code 8024402F Windows Update encountered an unknown error.

  Could someone please tell me what is the problem and please tell me the steps of how to fix this.
  If it has to do with a router, please tell me how to solve this problem with the router.

  Thank you

  1 see: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/8024402f-error-keeps-occuring-when-searching-for/ebb9fc06-685a-4cb3-a8b3-d45c6e6afe62

  2. Windows Update, error 80244016, 8024402f or c80003fa
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa

• How to create recovery discs?

  I just went to the Geek Squad to fix a problem (fixed) and the guy suggested I have reinstall windows because my computer is slow. I just need to know how to create the recovery disks?

  Contact the manufacturer of your computer to make recovery disks.

  This isn't their recovery process, Microsoft.

  Each manufacturer has their own way to do it.

  E-mail/phone them, or look in a manual or on their Web site.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And if you ever needed to do a start-up repair disc:
  

  How to make a Bootable ERD to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon. Mick Murphy - Microsoft partner

• Satellite P300-22 how many DVD should I prepaire 4 creating recovery DVDs

  I'm french too, so don't be afraid of my mistakes 'no more! '

  I have a Toshiba Satellite P 300, and I want to create a recovery DVD.
  How many DVDs to 4.7 GB / by, if I prepaire for this creation?

  Thank you
  in fact, I have a Toshiba P300-22F,
  There is a hard drive failure, because I changed the C: partition size
  I have to restore the player to factory default state using the recovery DVD,
  but I don't create this DVD.

  One of my friends has a model Toshiba P300 - 1 5.
  so I try to create this DVD form his computer...

  Hello

  At first I want to give you advice on DVD, you must use. For a successful recovery creation DVD use DVD-R virgins. I created several media recovery on the models of different laptops, with DVD-R media always worked.

  On the market there are several portable Satellite and Satellite Pro P300 and image is not the same for each of them.
  Just for info:
  -Satellite P300-1GL I needed a blank media only, but
  -for Satellite Pro P300-149 I needed two of them

  So I think that you need one. When you start 'Toshiba Recovery Disc Creator' and choose the media you want to use it, you will be informed how many of them do you need.

  Good bye

• When should I create recovery discs?

  
  

  Hello

  You must create your recovery discs now. These discs are created from information held in the recovery on the hard drive Partition, so any OS update etc don't appear - they never reinstall the operating system in the State it was when the machine was purchased everything first.

  Best regards

  DP - K

• Creating recovery discs - HP Pavilion 17 - I am a novice at this and really need support

  I downloaded information and directions to do this procedure on the HP site.  I have a few questions to clarify some of my concerns.

  1 using the dvd - recordable dvd is the same as you would use to burn videos or other?

  2. I learned later that this procedure should be done just after I bought the computer.  The only information I have on my PC are my emails.  I have not bought any software. Just got the things installed at the factory.  My question about this is in the article that says it will save all the software, but you can save the software to a system image using windows 8 to create a system image. I have instructions to do but ned opions on the question of whether I should just do to only my e-mail of files) or do it for the drivers, windows, programs, system settings files:.  It also shows the following which is very confusing to me that the HP recovery restores the image of the software in its original state.  Any software that is installed later is deleted when you perform a recovery of HP.  Does that mean if I do the first HP recoveering I lose my emails as well as bar favorites that I created to facilitate the connection to important websites without having to type in the address.  It was created for me and is installed with the screen of my provider verizon internet.

  3. I have an ALERT noting this update of windows 8 crashes 12% 13% 14% or 15%.  This alert has appeared on the results of product warranty HP detection/HP site and also another site that I don't remember.  What does that mean?  I don't know if I'm supposed to do something.

  I really need your help and your advice on how I should proceed on the above problems.

  Lynn

  I have instructions to do this, but need advice on if I should make every effort to only my (e-mail) files or do it for cover discs, windows, Control Panel, programs and files?  He

  joseysgirl wrote:

  Thank you very much for your quick response.  I have a few questions/comments to check that I understand your answers.

  1 DVD - I understand that I must use the best discs that will work in my DVD, such as Verbatim, Sony, etc.

  In addition to this is there any other preferences for the current DVD and for use on a 64-bit process that I have on my laptop, speed, other important characteristics? No, just get the DVD + R discs or good quality r. Sony usually works well for me.

  2. I unerstand that the actual creation of the recovery disc will affect in any way my software added and created documents such as e-mails and the bookmarks bar, etc., that it concerns only the factory installed components... Fix. Using disks to restore/reinstall on the laptop says back to out of box state. With this procedure, many people use a regular backup of the files to get back on the machine after a factory Recovery.An external USB hard drive is very nice for this, but backups can also be done on DVD.

  3. create a system image - am I right in assuming that this process does not duplicate topics in the created recover disks?  Also, when you add details such as software, the documents, etc. to your computer requires another creation of system images. She does double duty with elements of recovery such as Windows, drivers & software - but also an exact copy of the hard drive with your added files, newly installed programs, photos, etc. All of your personal files + recovery disc files are in an Image. In front of the effect of the restore with recovery disks - this process restores laptop with original Windows, software & drivers so that your files added. And Yes - additional Images would be required to maintain an up-to-date image.

  4 USB Flash drive - I have no idea what it is but I have instructions for the use of this procedure for creating recovery image on using flash player and it's faster than a DVD.  Is the ddrive USB flash something that I have to buy, it's expensive and my PC has the ability to use this process? Your laptop has Betacam do recovery on USB - but in reality this process gives owners more trouble than DVDs. Several times resulting in the purchase of several flash drives before finding one that works. My advice-stck with DVD.

  Thanks for your help.

  Here is the full information on my laptop.

  HP Pavilion 17-e040us