How to get hirigana on Japenese keyboard selection

Similar Questions

• How to get the value of a selected character unicode?

  Hi all

  How to get the value of a selected character unicode?

  The content property of a 'Character' InDesign object is a simple Unicode string. For access to the various characters is a basic javascript operation, and a google gives this as a good first result: http://www.w3schools.com/jsref/jsref_charCodeAt.asp

  Therefore, the value of a selected character unicode is

  App.Selection [0]. Characters [0].contents.charCodeAt (0)

• Equium M50 - How to get down to the keyboard?

  How to get off the keyboard?

  Hello

  You want to replace the keyboard or what?

  The keyboard is fixed with 2 screws. The two screws are hidden under the cover of thin plastic above the F1 - F12 key
  You must remove this plastic, thin cover to access these screws

  But note; the keyboard is connected to the motherboard with a flat cable, you will need to do this first of all unplug until you can remove the keyboard completely

• All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but did need help how to get rid of the pre-selection, so he's going to defau

  All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but need help how to get rid of the preset then all photos of goes to Default or in the shot. Thank you

  Go to the develop module and highlight all the images in the film at the bottom of the screen. Enable automatic synchronization, and then click the reset button. To reset all the images in your camera default settings.

• How to get the parameters of the selected time of the device?

  Hello!

  I have a few small projects and get the user settings, including Date/time (Options - Date/time). I need to get the information about the Format of the time and time zone (GMT) selected.

  How can I do this?

  Get an instance of the calendar, call Calendar.getTimeZone (). It is covered in the javadocs.

  See timezone and calendar.

  See also DateFormat.formatLocal)

• ListView MAF 2.1 how to get the value of line selection

  Hi all

  I'm trying to get the select line of a page with a listview amx

  to pass values of line as a parameter to the detail page

  which to get data from web service, but with links

  I always get the first value in the line of my list view.

  How can I refresh the values?

  Is - this java is better than the binding for this case?

  Can you help me please?

  Thanks for your help

  You can set the value of the selected line in a variable pageFlowScope and pass it to the method on the next page.

  Something similar to this:

  https://blogs.Oracle.com/Shay/entry/adf_mobile_update_through_web

• How to get the metadata for the selected tables of a schema

  Hello
  
  I need the metadata for the tables selected for an activity. The list of the table continues to change now. I get the list of tables just before the activity.
  
  What I need is to know how to put the list of tables in the sub query dynamicallly
  
  +++++++++++
  exec dbms_metadata.set_transform_param (DBMS_METADATA. False SESSION_TRANSFORM, 'SEGMENT_ATTRIBUTES',);
  exec dbms_metadata.set_transform_param (DBMS_METADATA. False SESSION_TRANSFORM, 'STORAGE',);
  exec dbms_metadata.set_transform_param (DBMS_METADATA. SESSION_TRANSFORM, 'TABLESPACE', TRUE);
  
  Select DBMS_METADATA. GET_DDL ('TABLE', '&') from user_tables where rownum < 2;
  +++++++++++
  
  What I need is something of the form where table_name in (< table1 >, < table2 >, < table3 >,..., etc.) in the query above, so that i access all the metadata
  He doesn't hit me how I can write this query to single line. Can someone help here?
  
  Regds,
  Malika

  Hello

  try using the name of the column to user_tables and owner of the table in the "DBMS_METADATA. GET_DDL' and the reel to reel for some files and run this file in turn exit.

  coil
  Select ' select DBMS_METADATA. GET_DDL ("' TABLE," ' | table_name |', "' ) double;' from user_tables
  where ;
  spool off;

  @some_file - trying to spool output too.

  -Pavan Kumar N

• Satellite A500 - 17 X: how to get the new backlight keyboard to work?

  Hello

  I recently had to replace the keyboard on my A500 - 17 X (PSAR3E-00N005EN) and I decided to replace it with the same keyboard backlit model. The original keyboard was not backlit, but I thought I'd give it a go anyway, as it was the same price.

  I installed it in my laptop and everything works fine apart from the backlight function.
  There was even a port for the Ribbon to be back so it is definitely installed properly. I read on other forums that it is sometimes a problem with the BIOS or HWsetup but my BIOS does not give me the opportunity for her and neither does HWsetup.

  I was wondering if there is a way to get the backlight to work on the keyboard.
  Perhaps another driver or by changing the BIOS/HWsetup somehow?

  Would be grateful all the answers!

  Concerning

  James

  In my view, there is no way to activate the backlight through drivers or BIOS settings. You may need to send the laptop to a Toshiba repair center to get it activated.

• How to get the index of the selected items in a listbox?

  I chose several items in a list box, but I can't extract the index.

  How can I do?

  Hello iCat

  If you have listobox in the mode of data table type, it simply returns the table of the selected index.

  

• How to get the index of the selected field

  I create a ListField with field 2

  MyListField myList = new MyListField(app);
  MyListFieldCallback myCallback = new MyListFieldCallback();
  myList.setCallback(myCallback);            
  
  String field1 = new String("Division 1");
  String field2 = new String("Division 2");       
  
  myList.insert(0);
  myCallback.insert(field1, 0);
  myList.insert(1);
  myCallback.insert(field2, 1);
  myList.insert(2);
  

  I replaced navigationClick and I want to get the index of the field when the navigationClick is called

  public class MyListField extends ListField {
      public MobileApplication app;
  
      MyListField(MobileApplication app) {
          this.app = app;
      }
      protected boolean navigationClick(int status, int time) {
      if ((status & KeypadListener.STATUS_TRACKWHEEL) != KeypadListener.STATUS_TRACKWHEEL) {
          selectionPerformed();
          return true;
      }
          return super.navigationClick(status, time);
      }
      private void selectionPerformed() {
                  // HERE I WANT TO GET THE INDEX OF THE FIELD SELECTED
  
          app.popScreen(app.getActiveScreen());
      }
  }
  

  What code is needed where I have comments?

  Use ListField::getSelectedIndex

  -Maury.

• How to get UIDRef of the document selected in indesign cs6

  How to UIDRef of the document selected in indesign the Isession cs6

  UIDRef EXTCODInspectLayoutModel::GetDocumentUIDRef(IPMUnknown* unknown)

  {

  UIDRef documentUIDRef (Nile, kInvalidUID);

  do

  {

  Database: IDataBase * =: GetDataBase (unknown);

  If (database is Nile)

  break;

  DocumentUID UID = database-> GetRootUID();

  If (documentUID is kInvalidUID)

  break;

  documentUIDRef = UIDRef (data, documentUID);

  } while (false);

  Return documentUIDRef;

  }

  Note: 'unknown' is an interface for the document class

• How to get several items when I select several rows in the DataGrid?

  Hi all

  I have a scenario where I have a datagrid and I have a few records in the datagrid control. I want to just select several lines of the data grid and display all the selected lines in datagrid, another... This as a multiple choice of datagrid... can someone tell me how I can achieve this scenario...?

  Thank you

  RAM

  Only, you should be able to use selectedItems.

• How to get the value of the selection of the text box list

  Hello
  
  I have a selection list that I want to retrieve the value of the selection of the text box list.
  
  How can I do this?
  
  
  Kind regards
  Santini.

  Hi Sarah,.

  Yo can use Java script for this...

  Dynamically the value will enter in the text box.

  Use the script below.

  See you soon,.
  Shan

• How to get the caption of the selected option button?

  I am building a dynamic form using javascript in Adobe livecycle designer, X.  I have a group of radio buttons, optGroup, with several individual radio buttons. Later in the form, I want to refer to selection that made the user with the caption of the button selected in the option group.  I tried to use resolveNode (optGroup.selectedMember () .name + ".") caption.value. #text') .value, but this only works if the first button in the group is selected.  Otherwise, selectedMember seems to be null and the code does not work.  Any ideas?

  Thanks for your help!

  BigO

  Hello

  You can do this. I just thought it would be easier to clear values "says.

  On the basis that you have a unique name for the exclusion of radio button group, so this should work:

  this.rawValue = RadioButtonList.selectedMember().caption.value.text.value;
  

  Hope that helps,

  Niall

• How to get a lookup value?

  Hello
  
  I'm looking how to get the value of the select list of an account by having only the Id of the account. I don't know if it is possible so I use this query:
  
  -----
  
  function getAccountInfo (rowid) {}
  
  soapAction var = ' document / urn: crmondemand/ws/account/10 / 2004:AccountQueryPage ";
  var miSoap = ' < soapenv:Envelope xmlns:soapenv = 'http://schemas.xmlsoap.org/soap/envelope/' > < soapenv:Header /------> < soapenv:Body > < ns:AccountWS_AccountQueryPage_Input xmlns:ns = "urn: crmondemand/ws/account/10/2004" > \n ";
  miSoap += ' < ns:UseChildAnd > true < / ns:UseChildAnd > \n ";
  miSoap += ' < ns:StartRowNum > 0 < / ns:StartRowNum > \n ";
  miSoap += ' < ns:PageSize > 10 < / ns:PageSize > \n ";
  miSoap += ' < acc:ListOfAccount xmlns:acc = "urn: / xml/crmondemand/account" > \n ";
  miSoap += ' < acc:Account > \n ";
  miSoap += ' < acc:AccountId > = \ "+ rowid +'\ ' < / acc:AccountId > \n";
  miSoap += ' < acc:AccountName /------> \n ";
  miSoap += ' < acc:AccountType /------> \n ";
  miSoap += ' < acc:CallFrequency /------> \n ";
  miSoap += ' < / acc:Account > \n ";
  miSoap += ' < / acc:ListOfAccount > \n ";
  miSoap += ' < / ns:AccountWS_AccountQueryPage_Input > < / soapenv:Body > < / soapenv:Envelope > ';
  
  Return ((miSoap, SOAPAction) SendQuery);
  
  
  
  }
  
  -----
  
  The problem of this query is that it does not provide the value of the list of choices, but only the picklits ID or default value in the choice list. I didn't need all because the values had been renamed then what I question is the value of the list of choices.
  
  
  Thanks and greetings

  Hello

  I don't think that you can be able to get the display of the drop-down list of values by using Web services, it will always return the lookup ID values.
  It is recommended to keep the two identical values (display value and the value of the Id).

  If someone has renamed/changed the display of the value of the drop-down list value then you must use existing Id values or disable the existing value of the selection list and create a new value in the choice list that has the same value display and the value of the ID.

  concerning
  Goud