How to get or need my driver's license (code) if I want to delete my space light and recharge?

Similar Questions

• DELL Precision T7500 eSata connector on the rear of the machine - how to get power to the drive?

  Howdy,

  I have a DELL Precision T7500 with an eSata connector on the rear of the machine - all my existing SAS and SATA ports on the motherboard are taken and I want to connect an external SATA drive.  How to get power to the drive?

  Is there a map that I can buy.  I have PCI, PCI - X, 2 slots available on the motherboard PCI Express.

  Should I consider that meanders on a power cable 4 wires from inside the machine?

  Thanks in advance.  :)

  Greetings MakesOwnWeather,

  Thank you for your question.

  You need to use what we call a 'hard drive enclosure. What is the physical size of the hard drive external that you want to use? 2.5 inches? 3.5 inches?

  The device draws power eSATA or USB below don't ports so no need of an additional power cable. He receives only 2.5-inch disks.

  http://Accessories.Dell.com/SNA/ProductDetail.aspx?c=CA&l=en&s=DHS&CS=cadhs1&SKU=a3018200

• LightroomCC2015 just disabled use.stating I need to purchase a license. I'm running on the plan for this and other applications. How do I fix this, please?

  LightroomCC2015 disabled just use of the develop Module. Indicating that I need to buy a license. I'm running on the plan for this and other applications. How do I fix this, please?

  Please see the troubleshooting section below.

  Reference: creative judgment Cloud 2015 to return to the mode of trial

  Let us know if that helps.

  Kind regards

  Mohit

• How to get a trial for the ADEP license?

  How to get a trial for the ADEP license?

  Hi wedone84 ,

  Please go through the link mentioned for trail downlaod: https://www.adobe.com/cfusion/tdrc/index.cfm?product=adep_experience_services&loc=en_us

  Kind regards

  Romit Sinha

• How to get to the C: drive when Xp does not boot?

  Hello

  After a few months of excellent performance of my laptop Satellite M40X I started having "blue screens of death" that eventually led to complite crash - all I get is a message (new on blue screen ;)) which):
  ---------------------------------------
  #STOP: c0000218 {Registry file failure}
  The registry cannot load the hive \SystemRoot\System32\Config\SOFTWARE or its log or another.
  It is damaged, missing, or not accessible in writing.
  Beginning physical memory dump
  Dumping physical memory to disk: ____ %
  ---------------------------------------

  I've read about this problem and I know I can do nothing to do only the OEM of Windows XP copy (recovery disk bootable, which, once entered gives me no access to C: don't drive command line). My question is thuoght, if it is possible to somehow get in my hard drive and safe some files before you format it? I have a desktop with Xp and network cable. Is it possible to install the memory stick or USB flash memory stick to BACK so I could copy the files on their?

  Thanks in advance for any advice

  Misia

  Hello

  have you tried to start your computer in safe mode?

  Or you can leave the laptop HARD drive and connect it as an external drive to your desktop computer. But I think that you need an adapter for it.

  Good bye

• How to get a manufactured HARD drive date?

  How to decode a serial number of the HARD drive to get the correct manufacturing date?

  I found some information, see the attachment below, but the HARD drive in question is SATA and serial number decodes to Feb 1997 which may not be correct.
  SN in question is 27MJFxxxx. Instructions below, 7 = 1997 - which would be 2007?

  Thanks for any help.

  -------------------------------------------------------------------------------------
  How to encode a Toshiba hard drive serial number?

  Toshiba serial number (S/N) includes the date of manufacture. The first digit of the serial number indicates the month of manufacture and the 2nd digit is the year.

  Example:
  M Y x x x x x x x
  M = month
  Y = year

  Data for the month goes from 1, for January, by 9 in September, then X, Y and Z, for October, November and December.

  Examples:
  2 8 1 7 0 0 0 1
  2 = February
  8 = 1998

  3 0 5 4 4 3 0 6 T
  3 = March
  0 = 2000

  X 9 7 8 3 3 1 T
  X = October
  9 = 1999

  The remaining digits contain information about the plant and the production line, and some numbers are reserved for a continuously running serial number.

  Hello

  I googled a bit and there are a lot of people that suggests how to read a serial number, I have no idea if he of right, but for example if you have a serial number: X7TO234534, then the product data would be October 2007 (X 7)
  X = 10 = October, Y = November, Z = Dec
  The first number is the month and the second digit is one year.

  So in your case, the serial number 27MJFxxxx should mean Feb 2007

  However, these are only some gossip on the internet and who knows if it of good or bad

• How to get a serial number or the redemption code?

  I've already paid for the photography Plan and download the software, but why always the trial? How to get a code redemption or serial number?

  Hi Sadydu78,

  Like its a subscription service so not necessary to any number or redemption code. I would ask you try sign and connect to office creative cloud. If its still ask the serial number then please check the links below that the same question has been discussed.

  Creative Cloud applications unexpectedly back in test mode - creative software says cloud my free trial has expired, but I have a paid subscription

  Creating cloud asking serial number - Cloud Creative applications ask for serial number

  Let me know if you need more help on this.

  Thank you
  Florianne Jindal

• How to get the dynamics of Cascades/Native license key

  Hello

  After spending all day reading on the generation of license keys with the usual confusion that comes from the documentation of the RIM I can now implement a dynamics in Java licensing system.

  The problem is my apps in C + c++ / Cascades.

  According to the documentation its on the device in a key peeler accessed by the CoreModule.

  In Java, you would do this after initialization the CoreModule;

  String lc = group.getProperty ("RIM_APP_WORLD_LICENSE_KEY");

  How to recover using native?

  If this is not possible then second best how can I get the device id?

  OK, so it turns out that it is not possible that RIM have apparently abandoned dynamic licenses for BB10,.

  Of course you can get a PIN and a license key, starting with 'test... '. ', to your package when you are debugging, but any hash code that you write using these will work not in release, there are two options, either;

  1. develop your own system of license (as long as the question of whether it will be necessary, watch a few months after BB10 piracy release pending)

  2. use the application by buying APIs.

  Full discussion on this are in the forum of stunts with a link to a response from the RIM.

  http://supportforums.BlackBerry.com/T5/Cascades-development/how-to-get-dynamic-licence-key-from-CASC...

• How to get the contents of drive E: on Equium P300-16 t?

  With the help of PartitionMagic, lost access to the partition that has been drive E: (the data partition). Fortunately, every thing is fine. But how to recreate or get a new copy of the recovery of files that were on the E: drive?

  PC is Equium P300-16t

  You have created recovery DVD Toshiba Recovery reminder on?

• HP psc 1210 all-in-one: after installing Windows 10 my hp psc 1210 does not scan, I get a "need WIA driver" (but it prints)

  Hello

  I installed Windows 10 about 3 days ago. The printer will print but when I try to scan I get the following error. Thanks in advance. print but when I click on Scan

  Hi @gregmalnickhp,

  I see you found the error "required WIA driver. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  The WIA drivers are part of the Windows operating system.

  Download and try to fix the WIA drivers. If you don't feel able to do these steps, you can contact the computer manufacturer or Microsoft to solve the error WIA.

  Back up the registry first.

  How to back up and restore the registry in Windows.

  Restore default startup for Windows Image Acquisition (WIA) Type.

  If you're still having problems, I would say to uninstall and reinstall the printer software.

  Temporarily, run Antivirus software and try to scan the image.

  If there is anything else I can help you, let me know. Thank you.

• How to get the external hard drive to connect to VMWare Player?

  Hi all

  I currently have VMWare Player 3.1.4 and that you have a VM installed on an external SSD that works very well.

  The guest operating system is XP and host operating system is OpenSuSE 11.4.

  The problem is that I have another external hard drive that I want to connect to the virtual machine to store files and other (WD Scorpio Black 320 GB).

  So what I tried was when I opend VMWare Player, I went to add a new SCSI device, found the hard drive, I wanted to use and created it. But when I go in-> "VM" > "Removable devices" > "generic SCSI (SCSI 0:1) ' > 'Connect'-> I get the below error message.

  Device virtual scsi0:1: could not open the device host "/ dev/sdc": not sufficient permissions to access the file. Please make sure that the virtual device is configured to use a Linux generic SCSI device (/ dev/sg *), and that the physical device works normally on the host computer.
  Cannot connect the device virtual scsi0:1.

  Does anyone know if I'm doing something wrong? What are the permissions are they talking about?

  Thanks in advance,

  Matt

  Are back at the office and tested on a variety of Linux Ubuntu and was able to add a second drive HARD/dev/sdb as a physical and even disc was also able to boot from it even if it needs to be dismantled first and I had to start VMware Player using sudo, because I was using a standard account both add the disk and run the virtual machine with the added disk.

• How to get rid of the banner in the middle which tells me that the email is from and to, etc, I just need to take place

  I don't need to know who the email - once again. He told me that in the list of messages. I certainly don't need to be told that it came to me. In fact, none of this information is relevant. If I label it I can tell the color where/what it is. All this information is reduntant, I put the commands in the control bar, but with this wide-band in the Middle, I'm wasting screen space for any of the lists of messages or the message itself. Before the last edition, I could get rid of it, but not now to my knowledge.
  BTW, the download of screenshot doesn't seem to work. . Jpg is 111 KB, which doesn't seem to be large, but it might be.

  Thank you very much! The addon worked! It reduces everything to a single line that is excellent.

• Can someone tell me how to get a compatible free driver to fix this wireless network card?

  When my laptop starts it is what I see: your network wireless card has stopped working properly because a compatible driver is not available for this version of Windows. PLEASE HELP IF YOU CAN!

  You will get the drivers from the Web site of the manufacturer of the computer or the manufacturer of the card.

  What card?

  Make and model of computer?

  Version of Windows?

  Did you change the version of Windows that was originally installed on the computer?

  He has already worked?

• How to get an old firewire drive to mount

  I have 2 hard drives hard firewire I haven't ridden in years. A way to test to see if they work. I can't either to mount, but they turn.

  Appear in disk utility?

  Appear in System Profiler under FW? Both the housing and the drive inside should show.

• How to get my external hard drive to work

  I have all my pictures down loaded on my external hard drive and now I have a windows 7 and cannot operate.

  I have all my pictures down loaded on my external hard drive and now I have a windows 7 and cannot operate.

  Have you tried another USB port?