DELL Precision T7500 eSata connector on the rear of the machine - how to get power to the drive?

Similar Questions

• Elgato HD60 Pro card causing "error allocation bar of e/s for pci device" at startup on Dell Precision T7500 (Windows 10 boots well after that freeze but occasionally)

  I have a Dell Precision T7500 with two processors, Xeon, 48GB of RAM, and recently I bought a PCI card captures Elgato HD60 Pro for streaming play.

  Whenever the card is inserted, I see an error saying to start (after the Dell logo and before Windows loads):

  "22/00/0: Error allocating I/O BAR for PCI device.

  I have 2 other PCI cards, which I removed and also tried to install the Elgato map on the other 2 slots, but the problem only goes away when the Elgato card is NOT installed.

  Any ideas?

  This is not a dell product.

  https://help.Elgato.com/

  Error allocating I/O BAR for PCI device

  strike F1 to retry boot, F2 for Setup utility

  The PCI-E bus is version 1.1, but your card is version 2.1

  http://Ark.Intel.com/products/36783/Intel-5520-IO-hub

  Your Xeon processors are not listed as the min spec core I5 3 rd Gen.

  There is no solution for this its the same reason that OLD maps sound and TV Tuner cards also do not work in the latest and most recent machines.

  For PCI and PCIe devices, a BAR is a Base address register which is used by the BIOS or the OS to tell the device door on what looks to match its memory resources in. Most of the PCI devices in your system requires a certain amount of memory space, and the BIOS tries to adapt all inferior to 4 GB for compatibility with 32-bit operating systems.

• Dell Precision T7500 hangs at BIOS on reboot

  Hello

  My Dell Precision T7500 hangs after that screen "search for devices to HBA 0..." tells me that ROM is installed successfully. Thank for nothing. It just hangs.

  I tried to restart, open the SAS configuration - there only one option, tried the F1 setup - this does allow me to enter any choice (so no diagnosis, etc.).

  It started when I rebooted my system Ubuntu 13.04 after the installation of updates.

  Any ideas?

  Thank you

  Ant

  Hi chubbant,

  Try resetting the CMOS battery.

  Now try to boot in the BIOS. Restart the computer and press F2 on Dell logo. Under the heading "Disks" disable the SAS controller. Now click on 'Apply' and get out.

  If the steps above does not work, move the hard drive to a SATA optical and 1 to SATA2.

  http://Dell.to/11myUzX

  The link above, click on manual and the Documentation Service Manual.

  Before opening the chassis, I recommend you to unplug the power cable, press and hold the power button for a few seconds and release evacuate residual electricity.

  Note: Open the chasy, if you are uncomfortable doing.

  * NOTE: Please ensure that the power cable from the computer is disconnected before opening the chassis. Refer to the service manual for assistance to remove or replace the internal components of the computer.

  Waiting for your answer!

• Dell precision M4500, activate or activate the fingerprint reader.

  Original title: I have a Dell precision M4500 workstation

  Hello, my question is that after that purchase the renovated new is to know how to turn on or even just turn on the fingerprint reader that is installed at the factory. I got a response that said to get with Dell, well, I called Dell and after going three steps to get someone, it says I need a code for Dell for assistance. Called Microsoft and a lady said that she would help that has been disconnected, call get 2 a man who was helping, control my motto then restarted me I thought that we will cut (Eh YES). My next call, I get a guy who said I have to pay (WHICH) and here I am back at the first stage. I'm sorry for the sounds of rattling, maybe it's not how it works, but I feel relief - HELP if you can -?

  Hello

  Thanks for posting your query to the Microsoft forum.

  I apologize for the inconvenience caused to you. I will definitely help you with this.

  The service can be activated via the Control Panel, but make sure that the drivers are install successfully and should be listed in Device Manager.

  Read this Microsoft Help article below and check the issue:

  Can I use a fingerprint with Windows reader?

  http://Windows.Microsoft.com/en-us/Windows7/can-I-use-a-fingerprint-reader-with-Windows

  Hope this information is useful. Thanks for posting for further assistance, we'll be happy to help you.

  _____________________

  Thank you best regards &,.

  Isha Soni

• Dell precision t7500 dual processor compatibility.

  Hi, I have a Precision t7500, currently with a single Xeon e5620 @ 2.4 ghz Quad core 12 MB of cache. With 32 GB 2x16gb 10600 sticks of RAM.  I just bought a 2nd processor, Board Assembly, heat sink and fan. Can I use one of the sticks of ram in each processor card? Also, could I use a combination of different processors? That would be an improvement recommended along the coast the Xeon E5620?

  Thank you very much.

  Edit - P.s. A new installation of windows is necessary?

  Read pages 17-19 in the Manual on the installation of RAM on the motherboard and riser for the dual CPU configuration.

  Unfortunately, 32 GB of RAM is not a configuration supported with two processors, even if it is compatible with a single CPU configuration. So, you may need to purchase at least 2 x 8 GB of additional RAM to run two processors.

  And note RAM must be double rank (DR) for use with two processors.

  Complicated...!

• After the update of DVD driver from Dell, my PC does not recognize the drive at all the

  Hi, I've updated my DVD burner on the Dell Web site (he said it was important), but since then, my computer does not recognize my dvd player at all. I click on "drivers" and the system finds it online. A halfway through the installation, I get an error code, and it says "Roxio pxhelp is missing" I don't have any Roxio software on my computer! Need help with getting my dvd drive working properly! Thanks in advance =)

  Original title; DVD writer not installed!

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• My Dell computer was running ok, but the drive was too small. After replaced by a bigger drive, I can not activate.

  The Dell PC came with XP. I bought Vista Home Premium and activated OK.  I installed a bigger drive OK, but I can't activate.  How can I activate the second installation?

  The problem is that you did a clean install with an upgrade disc and a key.

  See here for workarounds...

  http://www.winsupersite.com/article/product-review/Windows-Vista-installation-Super-Guide-part-3-clean-install-Windows-Vista

• Precision T7500 boot problem after BIOS update

  Hi eveyone,

  I've recently updated the a15 BIOS on my Dell Precision T7500 machine and now when it starts, it tries to start for a few seconds, then stops. He did this 10 times and the number 3 and 4 are on the machine. Everyone recognizes this problem?

  Win 7 64 bit Service pack 1, 6 GB of RAM, recently updated the BIOS A09

  Thanks in advance

  KWA-1,

  3 + 4 = suspends to RAM Windows fallback status

  You can start in safe mode and disable all options sleep/hibernate?

• Hard drive not recognized by BIOS in Dell Precision T7910 workstation

  Greetings,

  I recently acquired a Dell Precision T7910 workstation without all the hard drives installed, so I went to the store and buy a 240 GB Sandisk SSD put in the hard drive and then installed caddy caddy in port 0 (I also tried port 1 with the same results), and then I turned on the computer and it says "no drives found" press f2 to enter setup or press f5 for the diagnostics. I think there is probably a setting in the BIOS to configure the hard drive that I'm ignorant, so any help would be appreciated.

  Is there a CTRL-R (or another command CTRL during POST) to enter a for the LSI controller configuration utility? Possible that if installed/enabled, ports are managed by the controller LSI instead of the BIOS. However, I have not a 7910 to watch... just go out how it worked normally.

• Dell Precision 390, processors who work for an upgrade?

  We have two Dell Precision 390. One with the Conroe E6300 and one with the Pentium 4 631, variety of Cedar Mill.

  We want to upgrade the P4 to something better.

  We have a lying here Q6600 processor, and an old Pentium D 830 dual core CPU, but it's be better performer than one heart P4.

  Are the same motherboards in these two 390 s? I think that our E6300 could be improved to a Q6600, but the 390 with the P4, I'm not sure. They are all two socket 775. We already have the necessary correct heatpipe radiator for more hot processors.

  Thank you

  I got the info from Dell today. There are two motherboards used in the 390. We support the line Cedar Mill and Conroe CPU. The other motherboard for 390 supports the Q6600, QX6700 and QX6800.

• Dell Precision Workstation 690 with Win7-64 final. -3 TB hard drive?

  I have a Dell Precision Workstation 690 with Win7 64 Ultimate installed.  I want to use a 3 TB drive.  How will I know if the SATA controller is compatible with a 3 TB drive. ???

  How to know what Board motherboard or the SATA controller module I have?  When the computer starts first the BIOS detects SAS 5 Host Bus HBAO (?)  I forgot the exact name of disks while he finds the SATA drives.

  Greetings Tenoc,

  Thanks for posting your question on the community.

  The integrated SAS controller that comes with the Precision 690 name: 1068 LSI PCI - X - SAS 3 Gb/s controller. He is old enough, at this stage, and I'm sure that it only supports MBR (limit UP to 2 TB).

  You can try adding in a newer card, like the Perc H710. Not sure if it works or not. There are various other cards you might try there.

• CD/DVD driver damaged or missing. How to get the new driver?

  After working well for 3 months my CD/DVD drive does not show in my computer.  It appears in Device Manager.  Display properties Drive watch Code 39 driver damaged or missing.  Try to update driver says driver is installed and up-to-date. Said driver driver search comes with Windows 7.  How to get and install a driver right?

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to open the Panel rear Dell Precision M4600

  I want to open the back of the Dell Precision M4600 Panel so that I can increase the RAM and also put in a secondary hard drive. There is no documentation or a tutorial for that. Anyone can provide and guide on how to do it? I can't remove the battery, but here I'm lost. I see 2 screws on the back rear panel, but I don't know if it's the right screw to remove.

  Any help is appreciated.

  EDIT: Found the manual!

  ADMIN NOTE: broken link has been removed from this post by Dell >

  To add to the post of urlnotfound:

  Remove the two screws under the battery holding the lid.

  Slide, sometimes with a bit of force, the cover backward toward the back of the laptop.  Only, he moves about 1/4 "and is free to raise at this time here.

  Note that there is only a single 2.5 "HDD place, and it's the hot-swapable one you see on the side (still to figure out how to remove it, level didn't seem to do anything - for the moment).  "2nd HARD drive" is actually a dedicated slot 'mSATA', which means minicards SATA.  It's a tiny, as the three PCI-express slot you see when you remove the cover.  They are very rare to buy the property.  I really wish that I bought a Dell offered, aftermarket cause they are next to the non-existent.  I found only 2 manufacturers, which are the same brands under the hood.  But they are only the size of 50mm.  I want a site of 70mm slit in the WWLAN PCI-Express slot, cause those are available up to 240 GB.

  And FYI, devices with SATA II interfaces mSATA can get up to 240 to 250 MB/s read/write!  No, there are no mSATA SATA III that I could find.  Wanted for a month for them...

  Note also that only two senior RAM sticks are available here.  I'm about to call Dell support for where are the othe two DIMM slots (very probably have to remove the background map).

• A power of 1000w Dell Precision 690 United States will work in the British system

  I want to order a replacement power and found a Dell Precision 690 1000W ND285 power in the United States, I know that this system works this power but wanted to know if I ordered it from the United States to be shipped to the United Kingdom (England) it will work here or is there a voltage difference that will blow/effect it?

  The reason why I ask this is that I repair my friends Precision 690 power because it starts not as it should be because it has the dreaded 1-3 and power button flashing continuously orange. I usually get it going again for him leaving on the supply cable of the day after / for a few hours, but the problem comes back finally after some closures, so not a solution.

  His system has 32 GB of RAM, a processor my171 mother board 2 Xeon QuadCore 5355, a Nvidia Quadro 4800 graphics card and 4 SATA drives and 2 DVD r/w drives all sitting in the appropriate ports.  I tested it on and all the way to no disk no ram, but even in this case the problem may occur intermittently.  I don't know that his power relatively maybe even a little somewhere? but I've looked and looked and left with the feeling that his power.

  but the only one I can find that is affordable is to the United States, the price they want to pay in Germany, I could buy a car for.

  American food will work in my UK machine?

  Thank you.

  Hugh

  (Just note that happened in (general Hardware, Audio, video) I hope this is the right category, if not my apologies.)

  hughhill

  Yes, it should

  Input 100-120 v or 200-240 v, output: 1000w Max, reference number: ND285

  Model number: N1000P-00, Ref number: NPS-1000AB a Rev: 06

  For Precision 690 microtower systems

  Connectors:

  1 x 24 - Pin ATX power connector Standard ATX Standard 1 x 20-pin power connector, power supply ATX Standard 1 x 12 pin connector, ATX Standard 1 x 8-pin power connector, 2 x PCI-Express, 4 x Mini 2 power connectors pin power connectors, adapter 1 x 6 - Pin power connector.

  Before using the power supply, check that the voltage is set at 240v. There should be a red toggle on the power switch, to set the voltage, if there is no switch, then the power supply is auto switching.

• Card PCI-6259 is compatible with the Dell Precision 390?

  Hi all

  I need help in answering this question.  I want to buy a better computer for my data PCI-6259 acquisition card.  I tried to search to see if the card is compatible with the PC and there's previous numbers with this set-up before other users.  Do you have a link to the list of the DAQ cards with tested PC configurations?  I want to just make sure that when I buy the computer, everything will work without problem because I only have one shot at this.

  Thanks to all in advance.

  Kind regards

  justdomechanicalengineering

  Hello

  We do not have a link to specific DAQ board/PC pairings, but the specifications for the Dell Precision 360 indicate that she has three ports PCI 5V which must be compatible with your PCI-6259.

  Best,

  Dan Nelson

  Technical sales engineer