How to get the best performance with a McBook Pro 2, 3 GHz and 16 GB of Ram?

Similar Questions

• How to get the best performance high video for HP Pavilion Notebook m6-1002sa

  
  

  On the screen of the laptop, not a monitor outside, isn't it? Fortunately, it is not really difficult. There is only a single resolution to use: the native resolution of the laptop screen. Yours is 1366 x 768. Any other resolution looks blurry, and you cannot set a higher resolution than all. True HD 1920 x 1080 video will be challenged on your Panel and will be cut.

  You must also set the brightness to max unless you use the battery. The rest will be largely take care of itself. Digital billboards as a computer screen manages the contrast and the color almost balance automatically, although there are adjustments in the control panel for the video card. You have the dedicated video of 7670M (2 GB of DDR3 memory) AMD Radeon HD, so you should have an AMD/ATI Catalyst Control Panel. Search through the list of programs.

  This will give you an idea what you can do with the Catalyst Control Center:

  http://www.Tweakguides.com/ATICAT_8.html

  You can change how the video card will present films, for example, a bit like the adjustment on a flat screen TV smart (normal, studio, cinema mode, etc.). What is best is a matter of preference and I can't is the experience a bit until you find what you want.

  If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I have a HP computer and I try to get the best performance on it

  Dear community,

  I have a HP computer and I try to get the best performance on it, but it does not work. I try to update the drivers and use the memory of storge on USB keys and other stuff like using Microsoft Security Essenticals it is sort of: wered because there is no no way around my problem that way happens to you guys, please I want to just play and have the best performance that I can handle it.

  I think I'll put my memory to 8 GB of Ram or 16 GB of Ram.

  Thanks for your help.

  Original title: Windows 7 HP 2000-369WM

  Hello

  Before upgrade you your RAM, check at HP for the specifications of your computer to see what max amount and type of RAM your motherboard will / can use, or download and run the Crucial Scanner:

  http://www.crucial.com/USA/en/systemscanner

  Also, if you use Windows 7 32 bit, 4GBs is the maximum RAM that can be installed, with the exception of Starter which is 2GBs.

  If you are using Windows 7 64 bit, what are the limits of RAM max for each edition (there is no Starter 64 bit)

  http://Acer.custhelp.com/app/answers/detail/A_ID/2729/~/what-is-the-maximum-amount-of-RAM-memory-supported-by-Windows-7%3F

  Home Basic	8GB
  Home Premium	16GB
  Professional	192GO
  Enterprise	192GO
  Ultimate	192GO

  _________________________________

  And follow these steps to keep your device works properly:

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• How to get the new activation key when some numbers are taken away and you have received?

  How to get the new activation key when some numbers are taken away and you have received?

  Have a laptop with windows 7 from Dell. Need to re install W7. And I have some numbers are taken as a result of its use.
  How can I get a new code activation or my complete activation code?
  Best regards, W7 user

  How to get the new activation key when some numbers are taken away and you have received?

  
  Have a laptop with windows 7 from Dell. Need to re install W7. And I have some numbers are taken as a result of its use.

  How can I get a new code activation or my complete activation code?

  Dell provided you with restore/recovery media and/or a way to restore the machine 'default' as a key sequence?  If so - you won't need the number--unless they just sent a DVD of Windows 7 nu - and they are usually not unless you ask.

  They have probably installed using their key, which means that even with a utility like Belarc Advisor or ProduKey - you will not get the product key that matches the one on the sticker.

  Some may have you take several different digital pictures of the sticker from different angles and see if you can decipher the missing characters like that (you'd be surprised to see how that works).

• How can I get the best performance for the games?

  I have a Satellite A30 151 and he has an ATI mobility radeon 9000 igp 128 MB. I had a few problems in the game. I couldn't t get sufficient performance when executing some basic games. Are there updates or updates to driver for my ATI radeon display driver to increase his "performance?
  Answer [email protected].
  Thank you...

  Hi Ercan

  In my opinion, this is a common problem with laptops because performance laptops are not as on desktop computers, and there is no longer any possibility for updates as on desktop computers.

  Try to set all the graphics settings at a lower level. Maybe the performance will be better. I do it with the games I play.

• How to get the numeric values with SCPI on an AG7034B

  Hello

  I use an Agilent 7034 osciloscope with 4 analog and 16 digital channels.

  Read analog channels is no problem, but how do I get the digital channels (101010) waveform?

  I see the digital signal on the screen of the instrument.

  And: I want to do with SCPI commands and read/write Visa.

  Thanks for all tips

  Do you really mean the DSO7034B? If so, there are drivers available for LabVIEW and other programming environments. I suggest you only start with one of these. Check your manual to become familiar with the controls.

  PS ad to the digital I/o Board is incorrect.

• How to get the Max value with other columns data also.

  Suppose that a query is covered with the data as

  Time of ID
  01 07/12/2014
  02 07/05/2014
  03 16/07/2014
  04 07/07/2014

  I need to get the ID and time to time max.
  that is, should I get
  Time of ID
  03 16/07/2014

  To do this, I wrote a query that gives me necessary data. But I thought that's the best way?
  Is it an effective way to get this data?
  My query that returns the data required is:

  SELECT ID, MAX_DT FROM
  (
  Select 'DUMMY', ID, TIME1, MAX (TIME1) OVER (PARTITION 'DUMMY') AS MAX_DT FROM TAB1
  WHERE ID IN (BLAH BLAH)
  )
  WHERE MAX_DT = (EDT) 1

  Frank mentioned links
  

  
  

  WITH test_data (id, time) LIKE)

  SELECT 01, to_date('2014/07/12','yyyy-mm-dd') FROM dual

  UNION ALL

  SELECT 02, to_date('2014/07/16','yyyy-mm-dd') FROM dual

  UNION ALL

  SELECT 03, to_date('2014/07/16','yyyy-mm-dd') FROM dual

  UNION ALL

  SELECT 04, to_date('2014/07/07','yyyy-mm-dd') FROM dual

  )

  SELECT id, time

  go (select id,

  time,

  Max (Time) on latest_time (order by time lines between unbounded preceding and following unbounded)

  of test_data

  )

  where time = latest_time

  ID	TIME
  3	16/07/2014
  2	16/07/2014

  Concerning

  Etbin

• EliteBook 840 G2: How to get the best resolution on hp EliteBook 840 G2?

  Hi, my laptop maximum resolution is 1366 x 768, which I find too low.

  Can I upgrade the graphics card to get a higher resolution?

  According to the Windows Device Manager, it seems that I have 2 cards different graphics that are:

  AMD Radeon R7 M260X

  Intel(r) HD Graphics 5500

  Thank you!

  It is possible that the screen is only capable of 1366 x 768.  Check the screen resolution page (right click on a space empty on the desktop and choose 'Screen Resolution') to see what who said that the display is capable of.  THIS PAGE lists a selection of display of 1366 x 768 as one of the original choices.

  14 "diagonal of the SVA HD anti-glare flat backlit by LED (1366 x 768) if that's what the PC came with, there is not a resolution (1366 x 768)

• How to get the best image quality when you insert PDF into Word?

  I am able to insert a PDF file as an object in Word, but the image quality is a bit fuzzy.  Is this what I can adjust in order to improve the clarity of the image in Word?

  You can try to extract the images with the help of extract all Images or select only the parameters of the screen recording you get when you save in a DOC, but I think that the general result is that the image recorded with the same resolution as shown in the PDF document. It may be that you simply adjust your screen in WORD. You can look at the picture in WORD and see if it is used at 100% or some other resolution. Bitmaps are not very forgiving if the resolution is changed to the document and not as something other than the small number of fractions of resolution appears change.

• How to get the current username with script

  I try to get the user name for the current session of photoshop. I paid by the script documentation but I can't seem to find how do. In After Effects is as simple as that

  var username = system.userName;

  How ca I do the same thing in photoshop?

  $.getenv ("USERNAME") works for Windows and it or something similar will work for OS X.

  Edit:

  $.getenv ("USER") for OS X.

• Flash publish overview - how to get the Panel info with KB size etc.?

  In CS4 overview once published the SWF in Flash, I was able to get an information board with the size in KB and more information about the published file. What can I do in CC?

  Yes, the published info size appears in Flash CC as well. You can find it at the bottom of the properties panel to the chapter in the history of SWF, once you do test movie. (Be sure that nothing is selected on the stage)

• How to get the VLAN ID with Get-VirtualPortGroup

  I have vsphere with a number of distributed virtual switches.

  I have a number of ports on each dvswitch groups.

  I want to get the names and the vlan-IDS of all port groups.

  I tried:

  Get-VirtualSwitch-name MyDVSwitch | Get-VirtualPortGroup | Select Name, Vlanid

  It returns a list of the names of port group and just empty to the VLANID. I expected to see:

  Name Vlanid

  --------      ---------

  mypg-1 23

  mypg-2 17

  mypg-3 48

  and so on. But I just get:

  Name Vlanid

  --------      ---------

  mypg-1

  mypg-2

  mypg-3

  any ideas? Also, I would prefer to have a script that does not specify the dvswitch by name, but rather concluded all the port groups on all the dvswitches on all clusters in the data center and listed by name and id vlan.

  Thank you

  Are you obvisouly looking discussions on distributed switches, for those that the VlanId property is not present.

  You can do

  Get-VirtualSwitch-name MyDVSwitch | Get-VirtualPortGroup | `

  Select Name, @{N = 'VLANId'; E={$_. Extensiondata.Config.DefaultPortCOnfig.Vlan.VlanId}}

  Note that this does not work for GRPE of uplink ports.

• How to get the best connectivity WLan on Satellite U200

  I wonder if everyone is disappointed by the scope of the U200 wireless.

  I always find that my laptop shows 2 bars for their my BT hub (on the floor) when my eeepc located beside the laptop displays 5.

  I also found in other places that my partners laptop detects wireless networks much more that I do.

  I would prefer to explore the possibility of increasing my wireless connection before moving my BT hub to give me a better reception. being able to find the hub with my laptop wherever I am at home (like my partners)

  Anyone got any ideas please?

  OK, a few points of view but no ideas... I've now experimented with an external wireless adapter

  I have a toshiba satellite pro u200 with built in WiFi. I have also 2 adsl providers in the House (one is cancelled as soon as I am happy with the new - but I'll take the opportunity to experiment at the mo to try to resolve some problems)

  I have a wireless router in my office (the service of Virgin Media 2 MB - VM), the other is upstairs (BTHomehub 8 mb - BT)

  Using the built-in tosh Wireless adapt if I'm sitting 2 laptops side by side on my desk both pick up VM 100%. (tosh and eeepc)-c' is the case that the router slot in the Office!

  If I'm sitting the same 2 latops on my desk and get them to connect to BT, the onlys tosh gives 2 bars, the eeepc 100%. (by bars, I mean view available networks - see 5 bars to show the strength of connection)

  If I then plug an external 108Mbps Netgear WG111T Wireless USB 2.0 for the tosh connection adapter improves to 4 bars.

  can I do the built in WiFi on the tosh to improve things or am I better to use an external adapter. If I use the outside how tosh knows which adapter to use? as I have the switch wireless to the position we don't if this activate the integrated?

  Allow the pc show the network show the icon when connected and can see the speed to 54Mbps - whatever that means?

  shouldn't I expect to see 108 Mbit/s if that's what the external netgear is capable of?

• Compression of Facebook - how to get the best quality?

  Hi all

  I am a new user of Adobe first Pro CC was used for almost a month now and have produced videos and download them to youtube and facebook. I am aware that youtube and facebook compress the videos we download thus bringing to reduce its quality. I noticed that facebook compresses videos I upload more than youtube as the qualities that I download there are poor quality when already streamed on facebook. I wonder how I'll be ale to avoid having videos of bad quality on facebook, even after that it compresses the video. I used to use the formats below when I export my videos from Adobe first Pro CC using Media Encoder:

  Video

  -H.264

  -Width: 1920

  -Height: 1080

  -Frame rate: 24

  -Command field: Progeressive

  -Appearance: Square Pixels (1.0)

  -TV standard: NTSC

  -Profile: high

  -Level: 4.2

  -Bitrate: VBR, 2 pass

  -Target Bitrate: 16 Mbps

  -Maximum Bitrate: 62.5mbps

  Audio

  -Audio format: AAC

  -Audio Codec: AAC

  -Sample Rate: 4800Hz

  Channels: stereo

  -Audio quality: high

  -Flow rate: 320 kbps

  I use restore maximum quality in all my vids and I always get bad quality video and audio SPECIFICALLY. Audio is a lot more important to me that I post on youtube and facebook of cover song and this problem bothers me whenever I post my videos. The audio I use is also, in a uncompressed. Exported from Adobe Audition CC WAV format. I hope someone can help me with this. I know that there is a solution to this I see Facebook videos that are really good in terms of quality audio and video.

  Thank you!

  How can I make sure that my videos are of high quality. Facebook Help Center | Facebook

• How to get the Awesome bar with Mac

  I have a new Mac Mini. No great bar / location appears. How can I get it?

  H nancybishea2030,

  You should try to go to view > toolbars and activate the address bar and bookmarks toolbar.

  Hope this helps!