EliteBook 840 G2: How to get the best resolution on hp EliteBook 840 G2?

Similar Questions

• How to get the best resolution on Blu - ray (1080/60i)

  I'm experimenting with my new AG-AC160A camcorder and have been shooting young hockey games in AVCHD, 1080/60i, 1/120 shutter mode, white balance manual gain layout file properly resolved and fluorescent scene due to the lighting in the arena. I have PD CS5 and I'm disappointed by the relative sharpness HD lack when the release of the Blu - ray play on my HD set LED. I used the settings above, based on the recommendations that I saw in the forum somewhere. Any suggestions on what I can try differently? Thank you.

  Your sequence is defined on the framerate bad (time base)

  Your camera takes snapshots 60i which means the framerate is 30 (29.97) FPS.

  The video preview is also strange.

  You can use one of the standard avchd presets, that you will install nicely.

  I would not use Dynamic Link, I find that you have control over what you do.

  Use the Media Encoder and export to H.264 BluRay upper field.

  That are still important, do menu and burn.

• How to get the best performance high video for HP Pavilion Notebook m6-1002sa

  
  

  On the screen of the laptop, not a monitor outside, isn't it? Fortunately, it is not really difficult. There is only a single resolution to use: the native resolution of the laptop screen. Yours is 1366 x 768. Any other resolution looks blurry, and you cannot set a higher resolution than all. True HD 1920 x 1080 video will be challenged on your Panel and will be cut.

  You must also set the brightness to max unless you use the battery. The rest will be largely take care of itself. Digital billboards as a computer screen manages the contrast and the color almost balance automatically, although there are adjustments in the control panel for the video card. You have the dedicated video of 7670M (2 GB of DDR3 memory) AMD Radeon HD, so you should have an AMD/ATI Catalyst Control Panel. Search through the list of programs.

  This will give you an idea what you can do with the Catalyst Control Center:

  http://www.Tweakguides.com/ATICAT_8.html

  You can change how the video card will present films, for example, a bit like the adjustment on a flat screen TV smart (normal, studio, cinema mode, etc.). What is best is a matter of preference and I can't is the experience a bit until you find what you want.

  If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to get the best image quality when you insert PDF into Word?

  I am able to insert a PDF file as an object in Word, but the image quality is a bit fuzzy.  Is this what I can adjust in order to improve the clarity of the image in Word?

  You can try to extract the images with the help of extract all Images or select only the parameters of the screen recording you get when you save in a DOC, but I think that the general result is that the image recorded with the same resolution as shown in the PDF document. It may be that you simply adjust your screen in WORD. You can look at the picture in WORD and see if it is used at 100% or some other resolution. Bitmaps are not very forgiving if the resolution is changed to the document and not as something other than the small number of fractions of resolution appears change.

• How to get the best connectivity WLan on Satellite U200

  I wonder if everyone is disappointed by the scope of the U200 wireless.

  I always find that my laptop shows 2 bars for their my BT hub (on the floor) when my eeepc located beside the laptop displays 5.

  I also found in other places that my partners laptop detects wireless networks much more that I do.

  I would prefer to explore the possibility of increasing my wireless connection before moving my BT hub to give me a better reception. being able to find the hub with my laptop wherever I am at home (like my partners)

  Anyone got any ideas please?

  OK, a few points of view but no ideas... I've now experimented with an external wireless adapter

  I have a toshiba satellite pro u200 with built in WiFi. I have also 2 adsl providers in the House (one is cancelled as soon as I am happy with the new - but I'll take the opportunity to experiment at the mo to try to resolve some problems)

  I have a wireless router in my office (the service of Virgin Media 2 MB - VM), the other is upstairs (BTHomehub 8 mb - BT)

  Using the built-in tosh Wireless adapt if I'm sitting 2 laptops side by side on my desk both pick up VM 100%. (tosh and eeepc)-c' is the case that the router slot in the Office!

  If I'm sitting the same 2 latops on my desk and get them to connect to BT, the onlys tosh gives 2 bars, the eeepc 100%. (by bars, I mean view available networks - see 5 bars to show the strength of connection)

  If I then plug an external 108Mbps Netgear WG111T Wireless USB 2.0 for the tosh connection adapter improves to 4 bars.

  can I do the built in WiFi on the tosh to improve things or am I better to use an external adapter. If I use the outside how tosh knows which adapter to use? as I have the switch wireless to the position we don't if this activate the integrated?

  Allow the pc show the network show the icon when connected and can see the speed to 54Mbps - whatever that means?

  shouldn't I expect to see 108 Mbit/s if that's what the external netgear is capable of?

• Compression of Facebook - how to get the best quality?

  Hi all

  I am a new user of Adobe first Pro CC was used for almost a month now and have produced videos and download them to youtube and facebook. I am aware that youtube and facebook compress the videos we download thus bringing to reduce its quality. I noticed that facebook compresses videos I upload more than youtube as the qualities that I download there are poor quality when already streamed on facebook. I wonder how I'll be ale to avoid having videos of bad quality on facebook, even after that it compresses the video. I used to use the formats below when I export my videos from Adobe first Pro CC using Media Encoder:

  Video

  -H.264

  -Width: 1920

  -Height: 1080

  -Frame rate: 24

  -Command field: Progeressive

  -Appearance: Square Pixels (1.0)

  -TV standard: NTSC

  -Profile: high

  -Level: 4.2

  -Bitrate: VBR, 2 pass

  -Target Bitrate: 16 Mbps

  -Maximum Bitrate: 62.5mbps

  Audio

  -Audio format: AAC

  -Audio Codec: AAC

  -Sample Rate: 4800Hz

  Channels: stereo

  -Audio quality: high

  -Flow rate: 320 kbps

  I use restore maximum quality in all my vids and I always get bad quality video and audio SPECIFICALLY. Audio is a lot more important to me that I post on youtube and facebook of cover song and this problem bothers me whenever I post my videos. The audio I use is also, in a uncompressed. Exported from Adobe Audition CC WAV format. I hope someone can help me with this. I know that there is a solution to this I see Facebook videos that are really good in terms of quality audio and video.

  Thank you!

  How can I make sure that my videos are of high quality. Facebook Help Center | Facebook

• How to get the best possible, clear picture for our Web site

  Hello, I have a number of printed circuit boards to put on our Web site and I have decrease in size and the photos never seem that great. I use the Save to the web parameter in PS, but I was wondering if there was maybe I should customize when I'm there to increase clearity.  This is what it looks like when I shrink in size. Geeeez...  Any information would be helpful.

  Thank you

  T

  

  It seems that you save as a GIF. Instead, use JPG or PNG.

  And how did you resize? The edges look fairly irregular, but that might be in GIF format.

• How to get the best performance with a McBook Pro 2, 3 GHz and 16 GB of Ram?

  Hello

  I recently bought a MacBook Pro and I want to optimize my After Effects preferences to enjoy better performance.

  There are specifications of Apple:

  • 2.3 GHz quad-core Intel Core i7
  • Turbo Boost up to 3.5 GHz
  • 16GB 1600 MHz memory
  • 512 GB PCIe-based flash storage
  • Intel Pro Iris graphics card
  • NVIDIA GeForce GT 750M
    with 2 GB of GDDR5 memory

  Thanks in advance if any of you could help me do this

  Maurice

  Performance optimization: Adobe Premiere Pro and After Effects | After the effects of interest area

• How to get the best song off that poor record?

  Hello!

  I have a few really poor quality recordings, but since there is a debate, I would like to strengthen the voice to be able to clearly hear the speech, never mind the rest.

  It looks like the basement and without acute, adding that helps a little, but not really. Maybe someone could try and let me know what can be done?

  Here is the sample file: http://www.filedropper.com/13062009partial1

  Thanks for any help!

  topomorto wrote:

  You could always split registration on band of frequencies in two files and process them separately.

  What do you mean by that?

  If you want to do the dynamics of transformation with different settings on different frequency ranges, you must either a processor multi-band, or you need to separate frequency bands in different files.

  At the hearing, there is a multiband compressor, but not a multiband Expander.

  So, to do the expansion/blocking, you can take two copies of the file playing simultaneously in multitrack mode, delete or filter high frequencies of one and the low frequencies of the other and then treat them differently.

  And one more thing. What do you think, is it reasonable to use dynamic processing to amplify the low frequencies without touching the highest, to make the entire track more balanced and also stronger?

  You can try to use the multiband compressor to do this work. (who is a processor multi-band, so no need to split your file in the path I was describing).

  That's what modern pop producers to the slopes to maximize the volume - some people really hate the effect because it can lead to audio very harsh sounding!

  By the way, did you know that in the spectral display, you can simply select frequency, and boost / cut them directly? :

  

• How to get the best CPU consuming sql oracle 10g

  I see the top sql by running the report from ASHES. but there is too much information. is there a way I can just view TOP SQL section and filter the other parts? This way I can use it in a shell script and loops through the database.
  
  or are there that a query can do the work of ASHES?
  
  Thank you.
  
  Karl

  Have you run tkprof on the trace file to consolidate the results?

  HTH - Mark D Powell.

• How to get the system screen resolution

  Hi all

  
  I'm developing a flex application in adobe flex3. When I draw components in the design area flex builder is set to "Fit to window". so application are displayed on my monitor(17") correctly, but when I try to run the same application to another computer or a laptop of 14" display screen is different than the screen of the monitor is short, I need to scroll down to see the full page. My question is how can I make sure that the application should search for uniform on different platform/different browsers and different monitors (regardless of the dimensions of the monitor).

  And how can get the screen resolution of system during execution?

  
  Thanks for all the help and support.

  Look in flash.system.capabilities.  Note that any application based on a browser usually does not control how big be.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How to set up the hearing to get the best possible recording.

  Hello.  I'm a complete noob to your help and understanding are greatly appreciated.

  I use Windows 7, Samson co1u mic and audition cs6.

  I would like to know how to set the hearing to get the best possible recording.  I'm only audio recording for a podcast.

  I record in a 12 x 15 typical room in my home office.

  Thank you.

  He is not hearing, you must set up - simply recording what send you it, and it does not change in the slightest. What you need to do, is get the vocal microphone so that it picks up your voice in the best conditions it can - and it will be a combination of the microphone technique and possibly some changes of scenery if the room is particularly reverberant or echo-y.

  The microphone must be ideally on a support, and you need about 8-9 "of her, but ideally not directly talk to him. In other words, he won't be directly in front of your mouth; If you put it there, you stand a much better chance of picking up the sibilence and plosives ("ssss" sounds and pop). So just below or just above level of the mouth, and very slightly to one side usually works quite well. Made a windshield. I dream of recording direct speech like that without the help of a.

  You can set it up like that at first and see what it sounds like. If you get a lot of 'place' sound in it, you may need to put curtains of some sort behind you (the sensitive direction of mic's is this way, of course), which will reduce noise reflected from the walls. Being farthest from the walls is generally a good thing - more near the center of most of the sounds of spaces better because of this. If there are windows with curtains or drapes, then close them - large glass surfaces can make its rooms even worse. If you are going to do a lot of this, and have trouble with the room, then one good patch is one of the laboratories reflection filters themselves. Initially, I was rather dubious on one of them would work well, but after trying, I am convinced - it's a great way to keep a lot of room on the microphone.

• New to the blackBerry Smartphones Blackberry and LOVE my Storm! Now, how can I get the best party?

  OK, I am new to Blackberry and devices in general.   I had a Palm, but never really used.   Now, I have a Blackberry, I really want to learn how to get the most out of it.

  I want to get more organized with my calendar and schedule.   I want to keep a list of things to do.  I want that all my contacts easily manageable.

  In my Palm, she had a beautiful desktop app where I could add Notes, or memos or items to my calendar and then synchronize when it would move anywhere in my Palm.

  The B; ackberry Desktop application does not seem to have that same out of the box user friendilyness.    So my question, what program to use, how total, all this together to get the most out of my Blackberry?

  Outlook?   Google Calendar?  Another program?

  Thanks for any suggestions!

  Jamie

  The most transparent way is synchronization with Outlook, via the Desktop Manager.

  Step 1 install Blackberry Desktop Manager Manager of
  http://NA.BlackBerry.com/eng/services/desktop/

  Step 2
  Connect blackberry to your PC via a USB cable and let the blackberry device driver install. During the device driver installation is complete, it will warn 'material installed successfully' in your windows taskbar.

  Step 3
  Run the Blackberry Desktop software and choose the option SYNCHRONIZE.

  Step 4
  Now choose CONFIGURE and you can select the CONTACTS, CALENDAR, NOTES, and databases TASKS by clicking on the boxes next to each. After you select each item, it will ask you which application you want to synchronize with, there are OPPORTUNITIES for all.

  Step 5
  Now click OK on all windows until you are on the main blackberry Desktop Manager screen. Click SYNCHRONIZE. Make sure that the SYNCHRONIZE ORGANIZER DATA checkbox is checked. Now, click SYNCHRONIZE NOW to start the synchronization.

• You are not on the latest version of Firefox. Update today to get the best of the Web!

  Whenever I update my firefox, I get this message, you are not on the latest version of Firefox. Update today to get the best of the Web!

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox. I think that Google assumes that you are using an older version of Firefox, as they hard-coded message 'upgrade' in this page - all versions of Firefox see this message.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

  See - How to set the home page

• Why my start page says "you are not on the latest version of Firefox. Update today to get the best of the Web! "when in fact I have the latest version?

  I've upgraded to the latest version of Firefox, but I always get a message on my home page that says "you are not on the latest version of Firefox. Update today to get the best of the Web! »

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained by Google. You seem to have the latest version of Firefox.

  If you want as the Google search page as homepage, change your homepage to Subject: House (a new version of the old homepage Google/Firefox update is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox