How to get the print work selection

Similar Questions

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software

• How to get the card working on Tecra M1 WLAN?

  I just bought a 2nd hand Tecra M1. Great! It has installed XP but no Toshiba tool. I can't access my WLAN router. Seems like if WIFI connection is not yet installed. As I know from my Satellite Pro M30, there are Toshiba tools for this, they work smarter.

  Maybe I need drivers - WXP is material unknown when starting up - might be the WLAN device - who knows.
  When I check the network connections, I find 1934 and LAN adapter, but no WLAN device. I have already run the XP Wizard for WLAN connections, SSID and hexagonal key; but no WLAN device presents itself.

  Then, someone a idea how to get the job of WLAN?
  Is it possible to get the Toshiba M1 software or can I use my software SatPro?

  Thank you Jan so far

  It's good that you will find yourself, I think most of us would point on your ad when you have users with a similar problem. Sometimes it s really useful to have users like you who will investigate their cases.

  I'm now long enough a Member here, but every time I have met people who have solved problems like that, then I must say how much I appreciate it. :)

  Welcome and good weekend

• How to get the FileSystemTree coordinates selected item?

  Hi can we idea me in how to get the coordinates of the itwn selected in a FileSystemsTree?
  
  THX
  
  g

  You should do something like this:

  var itemRenderer:DisplayObject = fileSystemTree.itemToItemRenderer (fileSystemTree.selectedItem) as DisplayObject;
  Contact information: Point = itemRenderer.parent.localToGlobal (new Point (itemRenderer.x, itemRenderer.y)) var;

  contact information is now an object point representing the coordinates of your itemRenderer in the global coordinate system.

• How to get the opening working on El capitan

  This weekend I finally upgrade my MBP Lion to El Capitan.

  After that opening upgrade did not work. I remembered, there was a problem opening running on Yosemite and wanted to migrate to lightroom, maybe, but I have not had the time yet and already have hundreds of gigabytes of photos in Aperture.

  A magazine suggested to remove the opening of disc and reinstall via the App store to get the latest version that works apparently under El Capitan.

  Who did not work for me - I could not find in the App store opening. I initially bought Aperture for $200 on DVD, without going through app store.

  How can I get the latest version of aperture, so I can update my OS now and migrate from aperture far later?

  Probably not now - you must open 3.6 - maybe this will help you but I suspect that the time is over to get it - update to Aperture 3.6 after the release of Photos

  LN

• How to make the printer work with the new Windows 7 laptop?

  can someone me please help... my printer is windows xp and I just got a computer laptop windows 7, how can I make my printer work with my laptop!

  Thank you
  need help with my printer

  Hi gingerbabe001,

  To set up and install your printer, see the link below.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=setupCategory&cc=us&DLC=en&LC=en&OS=4062&product=1153754&sw_lang

  Good luck.

• How to get the ripple working, config.xml is not found

  Here a load of resources for getting started, but I just can't get anything to work as stated in the documentation, or the youtube video shows.

  I have various things installed, NodeJS, JVM, BlackBerry WebWorks 2.0.0.71, ripple in Chrome.

  To begin with when you use 'create cordova' layer of the project is different, cordova 3.4.0 I get:

  hooks /...

  mergers /...

  config. XML

  www/js /...

  www/img /...

  www/css /...

  www/index.html

  But information to addresses such as https://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html don't show this provision.

  I'm supprised when I open the config.xml file in Chrome that it does not detect the XML XSD and ripple offers to launch itself.  If I navigate to file:///C:/Users/Username/RippleSites/myproject/ www/index.html can activate ripple but she complains the file config.xml in lack.  Services of ripple Start' provides no clue as to any error and no TCP server listening on port 9910.

  I guess BB10 doesn't work with a specific version of cordova, which uses a different type of layout of project that one 3.4.x uses.  How can I fix the environment to use the correct versions and also automatically prevent the upgrade within this environment?  Because I want to obviously NPM allows management version of the future module updates.

  How C:\Users\Username\WebWorks Project\project interacts with the ripple need to use a specific home project directory as well?

  See the Option #1 here for more information about enabling access to the local files for Chrome/ripple:
  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/solution-ripple-launch-is-INTERR...

  That being said, the that training has been designed to be an emulator for the WebWorks 1.0 SDK, it relies on the features that have changed in WebWorks 2.0. For example, we leverage is no longer webworks.js, but cordova.js and webworksready changed to deviceready. In the end, there may be still some differences in the APIs, if efforts have been made to minimize any impact as he.

  BlackBerry 10 works with Cordova 3.1.0 and above (it may have been a few versions ago, but I don't remember exactly). Stay up to date with Cordova and use the latest version through the Museum is my personal recommendation.

  Note that if you use Cordova, you also need to install the NDK BlackBerry properly configure your environment variables.

  Note that the link to the above documentation referred BBOS, which is the platform of the inheritance (BBOS 5, 6, 7). BlackBerry 10 documentation can be found here:
  http://developer.BlackBerry.com/HTML5/documentation/V2_0/

  The www folder is root of your project that will contain all the files of HTML5. The other files are related to Cordoba and used for packing and manage your application is built.

• How to get the print page numbers in a report based on another report

  Hello
  
  
  I have a requirement in which I need to print the page based on another report number
  example my game application has 3 reports
  
  1 report prints the pages 1-100
  Report page no. 2 should start from 101 to 110
  3 report 111-
  
  Can someone make me please how to do this?
  
  THX in advance
  Kumar

  Hello

  You can create all report queries three in a single report, create a separate query in the data model and then create the layout in the proper sequence as required.

  If you want to use separate reports only you can try the following:

  In the first report, use the shutter release after report and record the total number of pages of a table as a record.

  In the second report, extract the value stored in the table and add it to the Page No. to get the Page number for the second report.
  Also in the second report use the shutter release after report and update the record created first in the total number of pages + total number of pages of the first report.

  In the third report to extract the value stored in the table and add it to the Page No. to get the Page number for the third report.
  Don't forget to delete the folder created in the trigger after the third report table report.

  I hope this helps.

  Best regards

  Arif Khadas

• Must press paper to get the printer working properly

  Printing problems...

  When we print from any computer on our P2035N printer must press the paper button so that it can work. Also, it will not print page 3 of one of our computers, he jumps just this page.  We have replaced with a new printer... even one and it has the same problem.

  Ask technical questions in the forum Feedback is useless, so I moved your post to the windows 'Hardware and drivers' forum.  Always include your version of Windows when you post.

  Messages displayed on the front panel of the printer?  This looks to me to an incompatibility between the paper type settings in the driver and the default type of paper in the printer and the printer is waiting for the type of paper correwct to load.  You say by pressing the button on the printer, the printer to use whatever paper is already loaded.  It could also be a mismatch of paper tray, with the pilot, indicating the printer to use a Board that is not loaded, or which does not match the default tray set in the printer.

• LaserJet m1212nf network - how to get the printer in a network?

  I have a LaserJet Pro M1212nf, who does not have wireless capability.  I'm on a desktop PC, Windows 7 and am connected with a USB cable from the computer to the printer. There is no other Windows 7 computers on this network, so so far I didn't have need of this feature.

  I spent an hour trying to figure out how to be able to print from my iPad with Airprint, that comes with this printer.

  The printer is shared, which I thought was enough, but apparently not. I found the instructions on the use of a printer wireless, which is not the case, and using an ethernet connection, which I am not, but nothing about the direct USB connection. I found instructions on changing a USB connection to an ethernet connection - this is what I have to do? I hope someone can help with this.

  Should I switch from USB to ethernet to be seen on the computer network and iPad? There must be a way to do this, but I am confused.

  Thank you.

  You should be able to install the printer with the normal software via an Ethernet connection to your router.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3965849

  Install and let me know the result!

  Have a great day!

  -Spencer

  PS this software should include the installation via the USB port option and then convert to USB wireless > Wireless Setup Wizard.

• How to get the printer sent in mode online

  My printer is in line mode since I got back from vacation.  Cannot get online.  Could someone please help?

  Please provide the following information if anyone can help including:

  The printer model-

  Detailed problem description-

  Operating system on the computer (including the revision of the service pack)-

  Method - USB, LAN, Wireless cable connection? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

  If wireless, when the problem occurs, which is blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router. Power on the router and wait 3 minutes, power on the printer. It connects to the router now? You have a valid IP address?

• How to get the plugin working in Adobe Muse Unity3D

  Hello

  I'm trying to migrate my site from Dreamweaver at Adobe Muse and I can't get the player Unity3D in Muse. Unity3D makes an HTML page and I took the code < head > of this and put it in the in the < head > Muse region using the page properties dialog box.  I also created an HTML object in the body <>the page and pasted into the content of the < body > of Unity3D HTML generation.  When I preview the page, I get the page loading of the unit, but nothing loads.  No progress bar is displayed.  Any thoughts?  Thank you.

  (Through this announcement on the forum Unity3D)

  In my view, that a change is necessary in the work of any code.

  Thank you

  Sanjit

• How to start the printer works if it does not recognize theprinter hplaserjet1010

  I tried to connect my printer to my laptop but it does not meet the laserjet1010 of the printer

  If you have Windows 7, then your printer is not compatible with Windows 7. See:

  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02535920 .

  There are Vista drivers that might be interesting to try, but do not bet on it.

• How to get the scroll work on galaxy S pen notes 2

  I noticed that I can't scroll with the pen of view S air as I can on other Android browsers such as stock or dolphin. Any suggestion would be great.

  From now on, this does not work and I don't know when it will be implemented.

• How to get the Bluetooth works on Satellite U300-155 and Linux Kubuntu 8.04

  I bought Toshiba Satellite U300-155 and I have Kubuntu 8.04 languages, but I don't see bluetooth when I turn it on.
  How can I use bluetooth under kububtu 8.04?

  Check if the antenna of your laptop switch is on. I think that the graphic tool should exist to manage the bluetooth. However if you're familiar with the linux console
  Then, you can also try the following command to activate bluetooth:

  sudo toshset - bluetooth module Bluetooth to connect to the USB bus
  sudo hciconfig hci0 upward
  sudo lsmod toshiba_apci-online background of access keys (+)
  sudo tail-f/var/log/acpi
  module installation sudo modprobe toshiba_acpi if not already available
  Press + to turn Bluetooth on or off. Check the acpi log output
  sudo hciconfig hci0 Bluetooth peripheral power