How to get the system screen resolution

Similar Questions

• Qosmio G20: How to get the higher screen resolution on monitor external 22 "

  I have a Qosmio G20 and today I bought a Samsung 226BW the external display. The Samsung has a max resolution / optimal 1680x1050px. The manual SAIS the laptop Toshiba supports a resolution of the external display up to 2048 x 1536...

  I tried now all sorts of settings, but the highest resolution I get on the external monitor is 1440 x 900 (-even as the laptop).
  1440 x 900 display 22 '' is not enough for serious photo editing;. It seems simply blur.

  What I am doing wrong? I deeply appreciate answers/comments; because if 1440 x 900 is all I can get, I have to return to the external monitor to the store...

  If someone is so good!
  Espen.

  Hello

  The available screen resolution depends on the graphics driver. You cannot choose the favorite one from the 1680 x 1050 resolution because it doesn t graphics card driver supports.

  Perhaps an update of the graphics driver could help.

  By the way; an inf file must be provided by the manufacturer of the monitor. You can install this file right-click and choosing install.

  Check also these forum discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570&MessageID=71767

• Re: How to get the system running again on my laptop satellite

  Everything ok and ongoing run (Vista 32 bit), also installing the update for Intel chipset seemed to agree,
  but subsequently requested reboot does not work... and the horror began :(

  No matter if the hard drive is installed or not, following events occur after passing on: hhd light indicates activity, also for disk hard desinstallion (!), in the possible bios by F2, dvd lamp is lit and portable crashes.

  What has gone wrong? How can I get the system running again?

  TIA

  The whole story is a bit confusing for me. I put t know how you came the idea to update the driver chipset if everything was OK. Vista is old BONES and it is unclear to me that Toshiba has offered some updates of the chipset.

  What is confusing to me is the fact that you can not enter the BIOS settings.

  When you start your laptop you see Toshiba welcome screen and the grey line down with info press F2 to enter the establishment or F12...?

  What will happen after that? Display stays black or what?
  What happens when you press F2, F8 or F12? Everything works? Can enter you in menu start or advanced startup options?

  Try please start your laptop with the recovery DVD and press C repeatedly on startup laptop. Check if the installation of recovery will recognize.
  Post please a little detailed report.

• How to get the active screen of the BlackBerry application?

  Hello

  I'm trying to get the active screen of the BlackBerry application, for example the home menu.

  I tried to use the screen ActiveScreen = getUiEngine () .getActiveScreen () in my code, but found error during execution.

  I know that this is because the getActiveScreen() method applies only for screens created by this application.

  So is there a way to capture the screen of the other application, for example the mail filter BlcackBerry?

  Thank you.

  Not wanting to not to repeat me, but there is no general way to get access to the Screen of another application object, unless you are on good terms with this application - which basically means that you have access to the instance UiApplication.  You cannot ask the operating system to get that to you, you must have a way to get you.  Which implies execution of something in the context of the Application.

  Even in this case, you may not be able to do what you want.  You will probably need to iterate over the screen and content managers and find the field you want, and even if it covers anything you understand (like BasicEditField) it still cannot handle standard things like setText in a way that is useful to you.  And you might not find fields you recognize, if you access a browser screen, I think you'll find there \are RIM not standard fields in there, so there is nothing you can interact from a standard application of the RIM.

  If you want to do this kind of treatment in General, that will deal with in a number of applications, you should watch event Injection.

  There may be other options for specific applications.  For example, you can simulate of electronic mail by writing a program that sends an email, rather than interact with the BlackBerry.  Or for the same application, if you try to test the headphones, then the listener has access to the UiApplication.  Aye, we be able to help you find approaches less General in some places, if we understand what you're trying to do.  This is the reason for the specific question that I asked in my last post.

  Regarding your second question

  "Another question is, can two separate applications of myself interaction by the user interface?

  For example, to call app2. ButtonField.click () or something. »

  It is in fact just an extension to your first question.  The difference is that you will find the UiApplication associated if both applications are on good terms, in fact you can "spend" the UiApplication via a Global event.  Once you have the UiApplication, you can use

  .invokeLater (...)

  to run the user interface code in the other Application.

  But I look at injector event because I think it might be a more general solution.

• How to get the system time?

  I want to get the system of unit of bb and information of AM/PM time. Can someone give me some code examples? Thanks in advance.

  Time system is stored as a number of milliseconds from an arbitrary date s in the past. You get this time using System.currentTimeMillis)

  You can extract the various components of the agenda of the time using the Calendar class.

  You can also create a SimpleDateFormat object to format this time for display.

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• How to get the system on disk vs download upgrade

  I'm trying to upgrade the system 10.8.5 to El Capitan. I'm pretty slow - Wildblue - on access to the internet and my screen shows that it will take 10 hours to download. Ouch, which will use a large part of my available bandwidth for the month.  HOW can I GET the upgrade of the system on the disk to install it manually?  Thank you!

  You can not. Take your MacBook Pro to a place that has a faster internet connection.

• Satellite L650: Is it possible to get the higher screen resolution?

  L650-1CH 15.6 ", 1366 x 768.
  ATI HD5650 1 GB

  Passionate about hardware, so please don't feel expected excessive things for me.

  Is it possible to get a screen resolution higher than stock, or better with the color / contrast?

  I was always annoyed how to wash the stock on my watched Toshiba screen. Recently the screen is cracked, so I figure now is the best time to look at the options.

  Google gave me very little information so far. I checked prices on replacement of the screen, with the part about being 60 and part + service with an average of 120, but that most likely leaves me with the same or lower screen quality.

  I hope to find something more suited to the movies / games and in 1600 x 900 if possible.

  Indications as to where I should start my search?

  Hello

  > Is it possible to get a screen resolution higher than stock, or better with the color / contrast?
  Yes, this should be possible since the graphics card should support a higher resolution.

  The laptop supports display TFT 15.6 "(HD).
  You certainly have the same screen size.

  Found some spare parts to the page + + pchub.com

• How to set the lower screen resolution on HP Pavilion

  I'm trying to figure out if its possible to lower my screen resolution of 800 x 600 on my HP Pavilion Sleekbook 14 - b010us running on Windows 8. I need to do that; It is the only way that I can get my pico projector to run using VGA to HDMI - I tried it with my Sony VAIO and it works perfectly. The lowest setting that I see on my HP is 1024 x 768, and it does not work. Any help? Don't want to have to buy a new projector - this one works very well and the HP laptop has a VGA port

  I came across this same issue using the resolution option custom in the Intel driver manager and has had success using mode low resolution.  I had also edited the registry to force more options.  The registry change which resulted in several resolutions between 1366 x 768 and 1024 x 768, but nothing lower.  Windows 8 is not really designed for lower resolutions (at least, which is not the ideal targeted resolutions), so I guess that would be present on any standard notebook Windows 8.

  However, I have relevΘ this site today to make sure I wasn't overlooking anything... and it seems that I was.  I don't know how I didn't have to check the option advanced settings for more resolutions.  This approach does not require mode low resolution to restart, but it's going to require a screen resolution > avancΘs > list all modes to get 800 x 600 option each time you need.

  Let me know if this has answered your questions.

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• How to get the control screen to return to the size was about Windows Vista Edition Home Premium

  HOW HE CAN GET THE SCREEN ON MY MONITOR TO PORTRAIT SIZE.  SOME HOW I SLAP ON A TOUCH KEYBOARD ON ACCIDENT & THE SCREEN IS 90 DEGREES TO THE LEFT...  HEAD TO SEE TILT SCREEN. ON THE SCREEN OF THE MONITOR FET IS PLACED IN A POSITION OF LANDSCAPE...   I DON'T KNOW HOW DO TO MAKE TURN IN THE CORRECT POSITION.

  THIE COMPUTER I AM INQUIRING IS THE TOP OF MY DESK.   I USE MY LAPTOP TO FIND OUT A SOLUTION.   I HOPE SOMEONE CAN HELP. ?

  Hello

  To bring your screen to normal hold down Ctrl + Alt and press one of the arrow keys on your keyboard.

  Or you right-click Desktop select Graphics Options > Rotation.

• How to get the system tray at the bottom of the monitor

  I found that the system tray icons had moved to the right side of the monitor. How do I get back them down

  Hello

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• the poster of the Bookmarks window is too big (suddenly occurred with the new version). I can't figure out how to get the smaller screen. Zoom does not work on the display of the menu bookmark.

  I have the 4 version, just download and a Mac OS 10.6. w. 7.
  Display the bookmarks (when I pull to the low "bookmarks") is far too broad. I can't understand how to reduce the display size. The window is not persistent, so I can't yet get you a screenshot.
  Thank you, Sara

  It seems that there is a change in Firefox 4, where the width of the drop-down list is now determined by the length of the longest bookmark name in the displayed folder. Versions previous of Firefox would be to shorten a long name like this and add an ellipsis to indicate the name has been truncated.

  Sorry, I don't know how to change it otherwise that you advise to change the name of this long bookmark name and make it less wordy. Just scroll to the bottom of the list of bookmarks in this vast folder until see you the culprit, then right click on that bookmark and open properties and change the line of name at the top of this dialog box.

• Satellite Pro L300-291 - how to get the work of resolution 1920 x 1080?

  Hello

  Really bad, my old PC and laptop can connect to my external monitor to 1920 by 1080, which is the native resolution of the screen, even made my Xbox 360. But won't my Toshiba Satellite Pro L300-291, it tops out at 1680 by 1050 and will not display anything higher. I tried the latest drivers without success. What is a physical limitation on the laptop?

  Thank you

  Mark

  Hey Buddy,

  I agree with the user above:
  -Check the user manual and
  -Check out the features of your graphics card

  Then you will find information which screen resolutions are supported and not. In addition, don t compare it with other laptops or devices. Not all laptops are the same, there are different hardware, etc.

• How to get the system during the report generation time?

  Hello
  I develop a model in which I am required to display the data of the current year only. Is there a method by which I can get time system (from which I extracted the year)?

  Hello

  If your model is rtf you can add a template field "Date" with the "yyyy" format mask, or add a form field with and same format mask as precedent.

  Kind regards
  Colectionaru