WLan connected to the Satellite U400 PSU40C but no data flow

Similar Questions

• Impossible to establish a wireless connection on the Satellite

  Hi all

  I am desperate because I implemented an env wireless in my house, and all my machines work fine except the toshiba one.

  In fact I see the network wireless only in Intel tools, then I click the button connect and get connected a second and the GET disconnected (but wireless is always visible from the laptop.

  Where do you think the problem?
  Router wireless card or the problem is in the toshiba.

  Note that I'm able to make the system operational wireless on another without any problem.

  Thank you for your quick feedback on this issue.
  Best regards.

  Hello

  Not easy to say what could be wrong or what might help.
  You must see this:

  -> try to update the WLan card driver
  -> check the WLan card driver and advanced properties tab more you could disable option economic power.
  -> try to use own windows Wlan connectivity
  -> disable the encryption on the router and try to connect without any security option.

• Slow WLAN connect to the router - Satellite Pro A200

  I have a Satellite Pro A200 - after starting the laptop she used to find the router wireless in good time, but now it seems to have slowed on the right and it may take a few minutes until 1/2 hour phone to find the router!

  This doesn't seem to be a signal problem because when the router is found that I get a signal strength full 5 bars. Connection to the laptop the router with a cable shows that no problem also that the connection and internet access is no problem.

  I do not understand why the laptop won't find the router faster and you would appreciate the help in the understanding of the problem and how to resolve the situation.

  I don't have a lot of technical knowledge so please keep in mind when replying

  Thank you

  Mike

  Hi Potter (maybe Harry?)  ;)

  You can easily find what WiFi card has been installed in your laptop.
  More details can be found in the *-> network adapters Device Manager *.
  Check this out and you'll know what driver WLan is required!

  _Regarding the question with your BIOS; _
  This error is known to me, always happens if you n t unpack the BIOS package correctly!

  What you need is a WinRAR or WinZip program.
  I prefer WinRAR and it helps to unpack all of the BIOS update.

  If you use the Vista operating system please check that another thread of forum on the same issue;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=123140𞄄

  Good luck

• No instant Wlan connection at the start of the Satellite L650

  Hello

  I had connection problems with my Toshiba L650 during the past two months.

  I bought my laptop about a year ago (October 2010), and everything worked perfectly until April 2011.
  The first months, my computer will automatically connect to the internet once it starts.

  From April 2011, my computer takes about 2 minutes to connect to a wireless internet connection when I start it, either my home connection or connection.
  Once it does not connect, wireless works perfectly.

  The problem is not a wireless router because it happens with all wireless connections. Also, I tried to update the drivers for the network card wireless (Broadcom 802.11n) no success at all.

  I would be grateful if someone could provide possible solutions to the problem.
  Thanks in advance.

  So, what exactly is the problem?
  The WiFi network connects well, but it takes two minutes until the connection has been established?
  Right?

  Well, it might be possible that something is running in the background of the BONE and so it takes a while until the laptop been able to connect to the Wlan.

  In my case, the laptop needs time to connect to the Wlan because the virus scanner and CCleaner run at startup and scans the HARD disk and the system.
  After that, the laptop connects to the Wlan.

• Touchpad does not work after the removal of the Satellite U400-18F

  Hello

  Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before.

  My laptop worked fine except the touchpad does not work!
  So please someone know how to unplug this cable so I can fix it...

  http://img841.imageshack.us/img841/4549/removetopcover17.jpg

  Thank you

  There must be some problem with contact. I recommend to unlock touchpad wire, put it back in place and simply lock again.

• Connectivity to the Satellite M30X USB problem

  Hello everyone,

  I have a problem with the USB to the Satellite M30X connectivity. I purchased a M30X and had problems with connecting devices of differnet in one of the USB ports.

  I tried to solve his problem and but nothing resolved.

  Goodbye, Meier

  Hello

  Rudi is right. There is a new update of the BIOS and it should solve the problem of USB.

• Power light is on when the Satellite U400/T5800 is off - is this normal?

  We have a Satellite U400 T5800/new, just bought yesterday and have completed the configuration of the software.
  Everything seems to work very well.

  However, I noticed that the orange power LED is turned on (solid, and not not not flashing), even when the laptop is off and there is no connected AC.
  I couldn't find an explanation in the manuals or online. This behavior is normal?

  Normally, I would expect a laptop can be completely powered down - is it normal for the LED light to be even on (continuously when laptop is turned off).

  When the laptop is turned on, the light turns white as expected.

  Thank you

  Hello

  I have a Satellite U400 too and if I close my laptop and unplug the AC adaptor all lights are off.
  Are you sure you did stop your laptop and not hibernate or stand-by? Check it!

  You can try to update the BIOS. Check the Toshiba site for an update.
  http://EU.computers.Toshiba-Europe.com

  Welcome them

• Yellow triangle with! the wireless network connection in the task bar icon, but ok in Device Manager

  I still need help: 11-24-10' uncorrected problem after all

  I have a laptop of refurbished HP older Pavilion ze5385US who has recently lost the wireless connection.  Now, I have to leave it plugged in to use, not practical at all.  I did the right click on the icon to open the network connections, left clicked wireless network connections and then clicked "repair this connection.  The uninstaslled of the computer, and then was not able to reinstall.  When I checked D, it was empty.  I thought it was where restoration stuff should have been.  So I downloaded and reinstalled much Express IEEE 802.11 PCI card Lan, until I found the one that the computer would be except.  Now, it appears in device very good Manager, but has theyellow cone with! on the icon in the status bar at the bottom.  When I raised it lights, it is said: 13 of (ANY) wireless network connection, speed: 11.0 Mbps, Signal strength: Excellent, status: limited or no connectivity.  When I choose "View available wireless networks", I get "Windows cannot configure this wireless connection.  Under network without wire/support/details of connections, Iget physical address: 00-02-8A-92-BE-0C, IP address: 169.254.196.112 subnet mask: 255.255.0.0, then the default gateway, DNS server, WINS server & have not enumerated values. I'm afraid to hit the repair again, it could wipe out the only map I've found so far that is accepted by my computer.  When I try to enter the knowledge base for WinXP, I get an error for this page, as well as several other help pages I tried the site of microsoft.com for help.  When I used configurationtool thewireless zero in respect of services & restart earlier, I had a red X on my icon, so I guess I've lost my card after all.  Can I disable this?  The map always shows as OK in Device Manager.  Any ideas anyone?  I need help here please.

  Hello

  I thank you and wish you the same.

  I see that your problem has been solved using the HP driver that you mentioned on Thursday, November 18 in your message and the Express.sys is a problem with Windows install.

  I suggest to install the version of Windows install 4.5 on the system from the link below and then update the driver from the link that was attached to your question before and check.

   

  Step 1:

  Install windows install 4.5

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2:

  Update the driver from the link you mentioned in your previous post.

  I suggest you to check with TP-link if this model is compatible with Windows XP or not.

  http://www.TP-link.com/products/ProductList.asp?class=WLAN#S6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• WLAN not detected on Satellite U400 - 14 M and Win XP

  Hello!

  I just bought the laptop U400 - 14M. I installed xp and got all the drivers from the support site.
  My problem is, that the wlan device is not detected, also if I am unsing the original wlan driver.

  Hello

  I have a U400 too and I m running Win XP.
  My work of WLan and I have no problems.

  What do you mean by Wlan is not detected?
  Device Manager say? Is there a yellow exclamation points in the network controller?

  As far as I know it is an Intel WLan card and the Intel Toshiba Portal WLan WLan driver should work.
  http://APS2.toshiba-tro.de/WLAN/

  You need driver Intel PRO/Wireless 3945/4965/5100/5300

• I am connected with the nearby ethernet cable but I can't connect to the network.

  I connected with the surroundings but ICAN t ethernet cable get internet

  Hello

  1. what operating system is installed on your computer?
  2. What is the error message when you try to connect to the Internet?
  3. don't you make changes to your computer before the problem?

  Search for related errors in the event viewer.

  Follow the steps in this article if you are using Windows 7.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• WRT54G v4 works PC connected to the router... but not of wireless signal

  The subject says it all.  A few things before this.  One is that we did pass the router in another room.  But things has worked well for a few days after that.  Before just what is happening, I used my phone inter-tel (plugged into the router).  PC and phone continue to have access to the internet... as I say, wireless in the House.  Fact stop and start all.  All unplugged / plugged in.

  Updated the firmware and it did nothing.  Some would like to help.

  After an update of the firmware, you must reset the default router, and then configure the router again from scratch.  If you have not done this since your last update of the firmware, please do it now and see if it solves your problem.  If you have saved a router configuration file, DO NOT use it.

  To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  Settings wireless-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.

  Click on the Wireless tab

  -Here the wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• An indication that I'm not connected to the Internet... but of course, I'm connected.

  X-red on Internet icons indicates that I'm not connected... but of course I am. It started today after "Optimize", "your own records. What happens to cable and wireless. It does not have any problem doing my normal activity (navigation, email, etc.), but an indication that I'm not connected is confusing. I stopped and restarted... same thing.

  Hi RichardDougherty,

  You can safely ignore the Red "X" on the connection icon that indicates that the network adapter is disconnected.

  See the following article:

  The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected

  See also:

  In Windows network connection issues

  Network connection problems

• Home wireless network users can no longer connect to the internet via router, but can connect to the network

  Modem Arris Touchstone telephony Windows Vista on PC, router Linksys WRT54G2, Netwk disk, Set netwk as private.

  My father's home network no longer works. All Pc's are running Vista. DSL is connected to the Modem Arris. Modem is connected by ethernet to the LinksysWRT54G2 router, that is connected to the PC. Other Pc is able to connect to the local network, but not to the internet. Main PC connects to the internet with a separate connection. See the other PC on the network. Daddy has no save the password and can not get him out of Linksys.

  Never mind. After 6 hours I fixed it. I don't know how I did it, but I think it was because I have unplugged and pressed the reset button on the modem for 10 seconds.