How to get two laptops to access the wireless network.

Similar Questions

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Password to access the wireless network

  I am trying to set up my iPhone to my home wireless network and I don't remember the password to access the wireless network and it drives me crazy! I'm going to network and sharing Center, then the properties of the wireless network. I click on the security is WPA-personal security type, is type of encryption: TKIP the box to show the network security key characters will not let me click on it. Anyone have an idea how I can access my own password?

  Thanks a lot, a lot in advance! Lisa

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  Contact support on the router's Web site people. Or reset the default router and start over.

• Flea market Vista laptop connects to the wireless network

  Hello

  I just got a computer mobile opportunity and I can't connect to our net at all. We have another laptop and a PC that both executed 7 that connect to it no problem at all. It is very strange that the laptop works perfectly, displays the connection, but point blank refuses to connect! I wonder if it is because it is not password protected? (I know, I know, but the PC does connect to him otherwise, that's weird). Any help is most appreciated!

  Hello

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Can someone direct me to resources on how you get TWO esx servers to the same storage array?

  Hi all

  I use:

  2 x Compaq DL380 G2 with 5i

  cards controller 5300 AND attached to the base storage Bay

  STORAGEWORKS ENCLOSURE 4354R RM DOUBLE PORTS U3 (not yet pregnant

  compatibility list).

  The first server appears to see the good in the console of the virtual server storage Center.  The second server will see s for only its own storage room tho.  How do both to see and use the same storage.  The concept is new to me, but trying to learn.  Is there something I need to see the same storage in the virtual Center for TWO machines esx Server?  All IM just not in the right place?  Thank you.

  http://communities.VMware.com/thread/78873 was a previous thread on this can enlighten us. Looks like the 4354R has the bus is divided into 2 x 7 disks and each connector in the back can 'see' 1 of the two buses. The quickspecs (http://h18000.www1.hp.com/products/quickspecs/10624_div/10624_div.html) refer to "... allows access to two areas of storage separated from two different servers. So the first "thing" would be to get two buses attached together inside the unit so that the two connectors on the back see all readers, you must get the endpoint SCSI disabled on the device (you want termination on each 'end' of the cable that is two SCSI adapters in the servers).

  While you might be able to get the 4354R shared between the two ESX hosts, you can also get all the benefits of the shared disk + the possibility of vMotion, etc. by implementing the 4354R known as iSCSI or NFS storage. It also swings you back to something that is 'supported '. To do this, you have two approaches

  1. Fix 4354R on one of the ESX boxes, create a virtual machine that has access to the entire disk on the 4354R and run something like OpenFiler in the virtual machine to 'share' the disk via NFS or iSCSI

  2. Set up a 3rd server if you have one available and run the version of "bare metal" OpenFiler, or install Linux or OpenSolaris distribution and configure NFS and/or iSCSI target.

• I cannot print to my photosmart C5280 of my laptop computer on the wireless network

  I have a Toshiba L750 running the operating system of Windows 7 32 bit and I am unable to print on my HP Photosmart C5280 printer. The printer is connected to my desktop which works on Windows 7 64 - bit OS with an ethernet cable. The printer works fine from the desktop and the laptop captures the internet wireless via the modem attached to the Office so that the network connection seems to be OK. I am also able to access the shared files on the desktop hard drive of the laptop which again seems to confirm that the network connection is fine. I tried to update the drivers concerned and all seem to be up to date. Previously, I was able to print from the laptop, but for some reason any, that he will no longer work. I have installed the printer software from the original CD supplied with the printer on the laptop to see if that would solve the issue, but nothing helped. I uninstalled from this software. I am at a loss and frustrated. I have also been through the printer Troubleshooter and Microsoft MrFIXIT, to anything will do. Someone out there of the clues as to what could be causing my problem? I might also mention that HP laptop of my son is able to print to this printer without any problems.

  Which, in my view, could have gone, it's that you used on your desktop printer sharing to allow other computers on your home network to access. Here's a video of Microsoft on how you can achieve:

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  Let me know if that solves the problem!

  See you soon!

• How to turn off auto connect to the wireless network?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  my computer keeps ti linking various networks in my area other the Virgin router installed in my house, I have constantly need to disconnrct all other routers wireless then you reconnect to mine, why?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  my computer keeps ti linking various networks in my area other the Virgin router installed in my house, I have constantly need to disconnrct all other routers wireless then you reconnect to mine, why?

  It seems that my Home net work identity is hidden? not accepting only the safety of my ssid, why?

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• Why can I get two different results from the same coefficients?

  I get two different results of the evaluation of the polynomial function.

  For the first, I get the coefficients of a polynomial function to adapt.  I feed the coefficients of the function made the function Eval Poly and get the correct 12.8582 result when I evaluate 49940.

  For the second, I create constant array of values that have been returned by the polynomial Fit function (I typed in).  However, I get an incorrect result of - 120.7913 when I feed the constant table the function Eval Poly when I evauate 49940.

  How this can happen when I use the same values in table?

  A picture of what I explained is attached.

  Hi Altran,

  are you sure about using the 'same '?

  You compare them? Do you have (at least) set them to 17 digits display properties?

  Please attach a VI instead of an image...

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

  Hello

  I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• Try to play a movie but I have WMP cannot play the file how to get to play or delete the Xvid codec to play?

  How to get to play or delete the Xvid codec to play? Movies in AVI format, I converted it to WMP, but he won't play again

  No guarantee but maybe you need the XviD Codec.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

• How to get distinct records by using the ListAgg OBIEE report function?

  Hi all

  I get a correct result as mentioned below. But I don't see duplicates in my result here, in my example, I get duplicate for the name of the employee 'Pat '. So how to get Distinct values by using the LISTAGG function?

  Data set of sample with the Department and its employees

  Service employee

  ----------      ----------

  Marketing Michael

  Pat of marketing

  Pat of marketing

  Pat of marketing

  Purchase of Den

  Purchase of Alexander

  Purchase of Shelli

  Purchase of Sigal

  Guy of purchase

  Purchase of Karen

  Using the ListAgg function, we can convert it to:

  Employees of the Department

  -----------     -------------------------------------

  Marketing of Pat, Pat, Pat, Michael

  Purchase of Sigal, Shelli, Karen, Guy, Den, Alexander

  I tried a lot of things, but I'm not able to understand how exactly this can be achieved, if anyone has any idea or suggestions please do share, thanks in advance.

  After much research, I found the solution & I want to share what he finds very useful, we can create SQL logic in the Advanced tab, as below and after you click Rescan, and then you will get your desired results.

  SELECT saw_0, Evaluate_Aggr T1.dept ("ListAgg(%1,'' & '') intra group (about 1%)") ("as long as VarChar (1000), T1.emp) saw_1 FROM)

  SELECT 'emp_dept '. "the Department dept,

  'emp_dept '. "' employee ' emp

  IN THE "DOMAIN".

  GROUP BY dept, emp

  ) T1 GROUP FROM T1.dept ORDER BY saw_0

  Also note here that we have good anti-aliasing for columns parent (ex: saw_0, saw_1), another by mistake oracle bi server.

• How to get Camera Raw to recognize the new Nikon D500 camera raw files?

  How to get Camera Raw to recognize the new Nikon D500 camera raw files?

  Devices supported by Adobe Camera Raw

  The D500 has been supported since camera 9.5 Raw which is only compatible with versions of Photoshop CS6 and Cloud.

  What version of Photoshop are you running?