How to hide a clip (mc) when the. Open SWF files?

Similar Questions

• When the open\close file

  Hello

  I have a loop and data acquisition and I want to write data to a file.

  What is the best option: to open the file once, at the beginning of the acquisition and to close when it's done, to open and close it whenever I write a line on the file or do something else?

  If there is no better option, I would like to understand the positive and negative points of each option.

  Best regards

  Gabriel

  
  

• Preloader which modifies the external SWF files every 5 seconds

  Hello
  
  I made a web banner in flash that loads an external swf and another external swf changes after 5 seconds. The banner have a preloader, but the problem becomes when you load the first time. As sovereign wealth funds are not cached in the cache of the browser and yet, time 5 seconds start counting from the preloader, and when the external swf file, shows only 1 second rest and it is replaced by another. There is a way to 'freeze' the time for each external swf until it loads completely?
  
  The code that loads SWFs every 5 seconds (this code is placed in a layer of action):
  
  start of the code:
  
  var intervalId: number;
  var: number = 0;
  var maxCount:Number = 23;
  var duration: number = 0;
  var banners: Array = new Array)
  "abatrade.swf,"
  "bancobrasil.swf,"
  "caparao.swf,"
  "cedro.swf,"
  "cesama.swf,"
  "copasa.swf,"
  "damatta.swf,"
  "emtel.swf,"
  "engedrain.swf,"
  "extel.swf,"
  "feedback.swf,"
  "iti.swf,"
  "intermedium.swf,"
  "magnesita.swf,"
  "maquenge.swf,"
  "maxxdata.swf,"
  "orteng.swf,"
  "paiva.swf,"
  "paraibuna.swf,"
  "paraopeba.swf,"
  "sabesp.swf,"
  "serpro.swf,"
  "soll.swf,"
  'thawte.swf '.
  );
  
  function executeCallback(param:String) {}
  var duration: number = 5000;
  loadMovie (banners [count], loadmovie_mc);
  loadmovie_mc._x = 0;
  loadmovie_mc._y = 0;
  
  clearInterval (intervalId);
  if(Count < maxCount) {}
  Count ++;
  intervalId = setInterval (Thi, "executeCallback", duration, banners [count]);
  }
  else {}
  Count = 0;
  intervalId = setInterval (Thi, "executeCallback", duration, banners [count]);
  }
  }
  
  If (intervalId! = null) {}
  clearInterval (intervalId);
  }
  
  intervalId = setInterval (Thi, "executeCallback", duration, banners [count]);
  
  end of the code
  ----------------------------------------
  
  And the code to the preloader (this code I place in the movieclip that loads external SWF files):
  
  start of the code:
  
  {onClipEvent (enterFrame)}
  var gtT:Number = this.getBytesTotal ();
  var gtL:Number = this.getBytesLoaded ();
  var gtP:Number = int ((gtL/gtT) * 100);
  If (TWG > gtL) {}
  This ._alpha = 0;
  _root. Loader._alpha = 100;
  _root. Loader.bar._width = gtP;
  clearInterval (intervalId);
  } else {}
  This ._alpha = 100;
  _root. Loader._alpha = 0;
  intervalId = setInterval (Thi, "executeCallback", duration, banners [count]);
  delete onEnterFrame;
  }
  }
  
  end of the code
  
  Note that I tried to freeze the time using a clearInterval does in the second code, but he simply doesn't work...
  
  Any ideas? Thank you
  
  Edson

  Here's the correct code kglad send me. Thank you very much!

• When I right click on a link 'Open link in a new tab"for a few days, he"jumps"tab to the right and opens in the tab beside it. How can I change this back to the opening in the tab next to the page, hence I open as it used to be?

  When I right click on a link 'Open link in a new tab"for a few days, he"jumps"tab to the right and opens in the tab beside it. How can I change this back to the opening in the tab next to the page, hence I open as it used to be?

  Just to add to the response of cor - el, in my case (identical) was specifically the complement DivX HiQ, worm 2.1.0.900. As soon as I turned it off, the tabs started to behave normally again.

• Hello, I bought a monthly license paid for indesign last night and I do not understand how to play with it? When I opened the window of creative cloud, they suggested me to buy indesign (but I bought it already...) Please, help me... It's easy to al amend

  Hello, I bought a monthly license paid for indesign last night and I do not understand how to play with it? When I opened the window of creative cloud, they suggested me to buy indesign (but I bought it already...) Please, help me... This is our easy to understand for beginners like me at all

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  https://forums.Adobe.com/thread/1962238

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• How you uninstall photoshop elements 13 when the windows uninstaller does not work?

  How you uninstall photoshop elements 13 when the windows uninstaller does not work?

  Hi James,

  You can follow the article: use the Adobe Creative Cloud cleaning tool to solve installation problems and use Adobe Cleaner tool that helps you to uninstall the application.

  Let us know if it works or not.

  Thank you

  Yann Arora

• I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  Hi Eileen97933052,

  The PDF form must be extended drive in order to have this feature to save & print the form data.

  Please confirm by the PDF Creator is the PDF reader or not extended.

  Otherwise, if you have Acrobat installed on your system, you can reader extend PDF form yourself.

  Kind regards

  Nicos

• How can I cancel my account when the need help page only allows me to go to forums and does no real contact for adobe?

  How can I cancel my account when the need help page only allows me to go to forums and does no real contact for adobe? How can I contact Adobe actually?

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Concerning

  Stéphane

• MAC OS Yosemite - CS6 - earlier, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's all

  -At the time, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's a window without having to be full screen mode? I managed to go a few times like this, but right now it's really annoying me. Help!

  

  Just drag the small window up just under the toolbar, you will see the area highlighted, and when you drop the file should anchor.

• How prevention JButton to actions generated when the user press down

  How prevention JButton to actions generated when the user hold down the key or the short cut
  The code below to show the question when the user keep pressing Alt O
  We want to stop the JButton to generate multi shares just a share only
  A code example shows the behavior that needs to be prevented. Keep pressing "Alt + O" and you will see that the standard ouptput will print the timestamp
  Note Please, I'm NOT interested in the mouse press which is a solution by adding a threshold (setMultiClickThreshhold (long line) on the JButton as an attribute.
  
  

   
  public class TestPanel extends JPanel
  {
  
     private JButton btn;
  
     public TestPanel()
     {
        btn = new JButton("Open");
        this.add(btn);
        registerCommand(new MyAction(), InputEvent.ALT_MASK,
              KeyEvent.VK_O, btn, btn.getText(), 0);
     }
  
     public static void registerCommand(AbstractAction action,
           int mask,
           int shortCommand,
           JComponent component,
           String actionName,
           int mnemonicIndex)
     {
        InputMap inputMap = component.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
        KeyStroke knappKombination = KeyStroke.getKeyStroke(shortCommand, mask);
  
        if ((component instanceof AbstractButton)
              && mnemonicIndex >= 0
              && mnemonicIndex < actionName.length()
              && (shortCommand >= KeyEvent.VK_A && shortCommand <= KeyEvent.VK_Z))
        {
           ((AbstractButton) component).setDisplayedMnemonicIndex(mnemonicIndex);
        }
  
        if (inputMap != null)
        {
           ActionMap actionMap = component.getActionMap();
           inputMap.put(knappKombination, actionName);
           if (actionMap != null)
           {
              actionMap.put(actionName, action);
           }
        }
     }
  
     public static class MyAction extends AbstractAction
     {
  
        /**
         * 
         */
        private static final long serialVersionUID = 1L;
  
        @Override
        public void actionPerformed(ActionEvent e)
        {
           System.out.println(System.currentTimeMillis());
  
        }
  
     }
  
     public static void main(String... args)
     {
        SwingUtilities.invokeLater(new Runnable()
        {
           public void run()
           {
              JFrame frame = new JFrame("Testing");
              JPanel panel = new TestPanel();
              frame.getContentPane().add(panel);
              frame.setPreferredSize(new Dimension(500, 500));
              frame.setMinimumSize(new Dimension(500, 500));
              frame.pack();
              frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              frame.setVisible(true);
           }
        });
     }
  
  }

  Published by: user12130673 on 13-feb-2013 03:01

  Use getKeyStroke (int keyCode, int modifiers, boolean onKeyRelease) hit with onKeyRelease = true instead?

• How do we install InDesign CC when the overview of the app says "updated" even if I haven´t whatever still installed?

  How do we install InDesign CC when the overview of the app says "updated" even if I haven´t whatever still installed?

  It seems that perhaps you have installed a trial at some point in the past and trashed the application folder rather than do an uninstall?

  Have you tried the cleaning tool:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• How to unload the external .swf file when pass the other section?

  Hello

  The following code provided by Mr. kglad works very well to load an external .swf file on stage. Now, when I click on Contact (button), the file external .swf to disappear completely. How to encode on contact (button) to get by.

  Gallery.addEventListener (MouseEvent.CLICK, GalleryClick);

  function GalleryClick(e:Event):void {}

  If (currentClip! = Gallery_mc) {}

  currentClip.visible = false;

  Gallery_mc. Visible = true;

  currentClip = Gallery_mc ;}

  var loader: Loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, ClipLoaded);

  Loader.Load (new URLRequest ("Gallery.swf"));

  function ClipLoaded(e:Event):void {}

  Gallery_mc. AddChild (Loader);

  Loader.x = 0;

  Loader.y = 120;

  Loader.Width = 1000;

  Loader.Height = 700

  }}

  I tried the following code for Contact_btn unload the Gallery.swf file that launches an error message: 1120: access of undefined property loader.

  Contact.addEventListener (MouseEvent.CLICK, ContactClick);

  function ContactClick(e:Event):void {}

  If (currentClip! = Cotnact_mc) {}

  currentClip.visible = false;

  Cotnact_mc. Visible = true;

  currentClip = Cotnact_mc;

  Gallery_mc.removeChild (loader);}}

  unloadAndStop() is supported by flash player 10 or higher (fp 10 +).

  p.s. Please check the useful/correct, if there is.

• How to determine the total number of images in the external .swf file loaded

  I have to be able to load both external .swf files and make them play in order. To do this, I need to know the number of images in the first .swf file so I can check _currentframe against _totalframes to determine when he is finished playing so that I can load another.

  Most of the stuff I see indicate that _totalframes on an external .swf can be determined by loading the .swf in a container clip and then check using a listener in the .onLoadInit. Like this:

  ------------------------------------------------------------------------------------------ ----------------------------

  this.createEmptyMovieClip ("tester_mc", 1);
  var mcListener:Object = new Object();

  mcListener.onLoadInit = {function (target_mc:MovieClip)}
  target_mc.onEnterFrame = function() {}
  If (this ._currentframe > = this ._totalframes) {}
  trace ("total frames =" + this ._totalframes);
  delete this.onEnterFrame;
  } else {}
  trace (target_mc._currentframe + "OF" + target_mc._totalframes);
  }
  }
  }

  var test_mc:MovieClipLoader = new MovieClipLoader();
  test_mc. AddListener (mcListener);
  test_mc.loadClip ("Ad_Group.swf", tester_mc);

  ------------------------------------------------------------------------------------------ -------------------------------------

  Unfortunately, this doesn't seem to work. The trace will always return a total number of frames of 1.

  I guess it's because the container clip has only 1 frame, and the external .swf timeline seems to be ignored.

  I would appreciate any ideas on how to raise the total number of frames of an external .swf file or, Alternatively, put it another way when it's done playing. (Not only the loading, but play until the end.)

  TIA,

  C

  I guess it's because the container clip has only 1 frame, and the external .swf timeline seems to be ignored.

  I wouldn't imagine. My guess is that the main scenario for the external swf file has only 1 frame and the rest of the animation is inside a movieclip in this timeline. You publish this swf? Can you open the FLA and check how many images is open on the main timeline?

  The approach that you have mentioned is about what there is. But he knows check a chronology. If there are many nested movieclips, it may be impossible to understand what timeline you really want to be 'THE' full chronology.

  If you have the FLA, you can have the video call function on the _root timeline which tells the main swf that has completed a movieclip or something like that.

  Also, I have in my head somewhere that I recently saw something that someone made similar to this one, but do not remember... If it appears in my head that I will post.

• When I open multiple files, they now appear as tabs, I want that they as in separate windows, as they used to be - how?

  When I open multiple files, they are now appear as tabs, I want that they like to separate windows, as they used to be!  What has changed?  How can I put it to the way it was to be able to open them in different windows (so I can look at them side by side, among other things)?

  Thank you!!

  Read this:

  Anyone know how to display two Windows Adobe instead of two tabs?

• How to make reference to the external SWF file using if statement?

  I have a main swf file that loads several external SWF file when the user clicks a menu button. Now I want to target a specific swf file to Add an extra library child or of another swf when this specific swf file is loaded. How should I do? What should I put in the stated case?

  ///////////////////////////////////////////////////////////

  var newswf:URLRequest = new URLRequest (".") ("/ swf /" + event.target.name + ".swf");

  Loader.Load (newswf);

  addChild (loader); dynamically load SWFs

  If (newswf == ".") ("/ SWF/pubResCHETNA.swf ') //error here

  {

  FC.buttonMode = true;

  FC.addEventListener (MouseEvent.CLICK, full screen);

  }

  function fullScreen(e:MouseEvent):void

  {

  var loaderF:Loader = new Loader();

  loaderF.load (new URLRequest ("PopupFullscreen.swf"));

  addChild (loaderF);

  }

  ////////////////////////////////////////////////////////

  The State must be newswf.url == the path. However I store event.target.name as a variable and use it in the State. You use "." for your path so the condition probably will always fail.

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/