How to include LabView Instr.llb in a deployment of TestStand?

Similar Questions

• How to connect Labview to PLC Modicon Quantum (140 CPU 311 10) with Modbus

  I was wondering if someone could give some tips on how to connect Labview to Modicon Quantum plc (the card is 140 CPU 10 311).  I am eager to serve a Labview HMI to control the controller that is used to implement the control PID with a VFD.  Currently I can communicate via Modbus to the API for programming using UnityPro XL, but I have no idea how to connect Labview.  I read the article on place OR "connect Labview to any PLC via Modbus", but I don't know yet.  Any help will be greatly appreciated.

  Hey Greener.

  Communicate with the PLC via Modbus usually requires the Datalogging and Supervisory Control (DSC) Module to have this feature available in LabVIEW. The white paper which indicated you using this module, which may explain why you can't get the communication at work. If this is something you don't have, and purchasing a license is not an option, then you might be able to use Modbus unofficial libraries to get the functionality you need. I have included a link below to a Modbus for LabVIEW library that you can try.

  DSC module:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209851

  Modbus Library:

  http://www.NI.com/example/29756/en/

  Kind regards

  Ryan

• How to include the name of the vendor and the Version for the appliation

  Hello
  How to include the version and the supplier of the application/product we created. I have sucessfully signed the code file in the mobile, but now I want to include the version and application provider how to do this.

  If you suspect that other people have asked similar questions, then by searching this forum or knowledge base is the right thing to try.

  http://supportforums.BlackBerry.com/T5/Java-development/read-version-from-inside-app/m-p/345845#M638

• How to include folders to D: drive, specifically in Documents public, not only in the document library?

  Windows 7 Pro 64 - bit SP1: how to include records of the D: drive in public Documents so that they become automatically visible to each user who opens his library of Documents? At present, I can only include these folders in the document library, invisible to other users. I don't want to load large files physically in the C: drive, where public Documents.

  You can do this easily because public Documents is a folder, not a library.

  You can place junction points in public Documents that point to folders on the disk D:\.

  To do this open a command prompt by typing cmd in the box to start the search, made a right click the program cmd that appears in the search results and click 'run as administrator '. Type the following command and press ENTER:

  MKLINK /J "C:\Users\Public\Documents\Folder" "D:\Folder.

  http://TechNet.Microsoft.com/en-us/library/cc770988 (v = ws.10) .aspx

  You may need to adjust the permissions of files and folders on the drive D:\ so that all users can have access to them.

  I have not tested it; so be cautious.

• How to include a message of output in a procedure

  Hi guys,.

  I have the procedure, where I need to include a query of exit message, please help me.

  The procedure is:

  create or replace procedure insert_data_employees (p_name in varchar2, p_acess_level in numbers) as

  v_Name varchar2 (100);

  number of v_uname;

  Begin

  If p_name is not null then

  BEGIN

  Select COUNT (1) in the v_uname of employees

  where

  Upper (p_name) = upper (name);

  Exception

  WHEN NO_DATA_FOUND THEN

  v_uname: = 0;

  END;

  End if;

  INSERT INTO employees

  (name, rol_id, emp_number, creation_date) VALUES

  (EMPLOYEES_DATA_SEQ,

  regexp_replace(p_name,'(.*)@.*','\1'),

  p_acess_level,

  SYSDATE

  );

  COMMIT;

  end insert_data_employees;

  If I write the query in the form:

  create or replace procedure insert_data_employees (p_name in varchar2, p_acess_level in numbers, some o_return_code number)

  How to include under conditions in the procedure? How can I represent the successful and failed integration in a query?

  a. If successful insertion, then o_return_code = 0

  b. If insertion failed so o_return_code = - 1

  Please help its urgent...

  You can use the cursor SQL SQL and FOUND for this % NOTFOUND attribute.

  create or replace procedure insert_data_employees(p_name in varchar2,p_acess_level in number) as
  v_name varchar2(100);
  v_uname number;
  Begin
  if p_name is not null then
  BEGIN
  select COUNT(1) into v_uname from employees
  where
  upper(p_name) = upper(name);
  Exception
  WHEN NO_DATA_FOUND THEN
  v_uname:=0;
  END;
  End if;
  INSERT INTO employees
  (emp_number, name,  rol_id, creation_date) VALUES
  ( EMPLOYEES_DATA_SEQ,
    regexp_replace(p_name,'(.*)@.*','\1'),
    p_acess_level,
    SYSDATE
    );
    IF SQL%NOTFOUND THEN
    o_return_code := 1;
      dbms_output.put_line('Records inserted');
    ELSIF SQL%FOUND THEN
      o_return_code := 0;
      dbms_output.put_line('Nothing inserted.');
  COMMIT;
  end insert_data_employees;
  

  I have not tested the code in my DB.

• How to include banner_edge.js in banner.html?

  Hi, my question is simple.

  How to include banner_edge.js in banner.html?

  Our server may not have this file separately for specific reasons.

  But we can give the file to an absolute address.

  edge_includes\edge.5.0.1.min guess a banner_edge.js

  
  

  Thanks for the quick replies

  Without doubt, I've solved my problem...

  change in html file

• How to include a license header in the fxml file?

  How to include a license header in the fxml file?

  I tried the xml block comments <! - mylicense here - >

  but it has not been accepted by the manufacturer of the screen.

  Also, I asked, even if it had been accepted, would have saved the return - or deleted header screen generator?

  All XML documents must begin with an XML declaration.

  If you have your file fxml starting with the following lines:

  .. It will be loaded into the generator from the scene and saved as is.

• RMAN active cloning: how to include SPFILE on ASM

  OS Version HP - UX B.11.31 U ia64
  Oracle DB Version 11.2.0.3.0
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  Storage: ASM starts
  -------------------------------------------------------------------------------------------------------------------------------------------
  
  RMAN active cloning of databases, how to include the SPFILE to clone on the ASM storage?

  Hello;

  See the example here:

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmdupad.htm

  Under "example 25 - 4 reproduction of a file system to ASM (active).

  or

  Example 25-5 duplication of ASM to ASM (active)

  Best regards

  mseberg

  Published by: mseberg on May 15, 2013 10:34

• How to include the URL of a page in the Notification E-mail?

  Hi all
  
  I need your help to implement the conditional.
  I implemented the notification email in our application.so whenever the user creates a form/shape, the mail will be triggered to them. Now, users want to include the link in the email.
  When they click on the link in the email, it should access to the newly created in the Apex form page.
  How to include the link to the page being Email?
  
  Thank you
  Robette.

  Maybe you can try this,

  1. create a hidden item say P1_URL
  2 write this in "Run when the page loads" document.getElementById('P1_URL').value = window.location.href;
  above code will give you the current URL
  3. you can use the element preceding everywhere where you want.

  Concerning
  Tauceef

• How to include the username of the apex in a trigger?

  Hi all!
  
  When I click in a an update button trigger is run it.
  I have a table in this table, I create a trigger.
  in this trigger when there is an insert or update in another table, one of the field in the second table is the username.
  How I sent the username of the apex in a trigger?
  With APP_USER, I get the user_name, but I don't know how to include in the trigger.
  
  Any help would be appreciated.
  
  Best regards

  Hello

  You can do:

  :NEW.USERNAME := v('APP_USER');
  

  Andy

• How to make a manager of UIMessage of PostStep of TestStand in LabWindows/CVI 8.1?

  How to make a manager of UIMessage of PostStep of TestStand in LabWindows/CVI 8.1?

  Hi all

  I have a problem of capture UIMessages motor TestStand for a DLL called from a sequence.
  A search on the forum gave rise to 2 posts on this topic or a similar problem, but with LV and unfortunately, they were not solved.

  TestStand Event 13 - UIMsg_StartInteractiveExecution is not captured by LV operator Interface

  Problems with ActiveX in LabVIEW 7 reminders

  In detail, I want to activate a DLL access the TestStand SequenceContext (variables) in phase of execution of the step.
  A pop-up Panel could then display variables such as the spy does, but more flexible user defined Panel window.

  He is currently working with a periodic timer that causes racing with TestStand conditions while monitoring the variables.
  It works 99%, but I want it to work 100%.

  I found the
   TS_ExecutionAddPostStepCustomUIMessage()
  to indicate to the engine, I want to be informed of one end of the stage with my private UIMessage.
  Next is to implement a callback with
   TS_EngineRegisterUIMessageCallback()
  to retrieve all UIMessages and filter my private.

  Sounds good - works for the capture of events, but TestStand locks and does not continue execution and not to carry out handling
  any operation of the user interface. I have tried 4 solutions (see code), no difference in the result.

  I must kill TestStand to get out of it.

  Attached you will find a stripped down a simple example to reproduce the problem.

  I'd appreciate any help.
  Thanks in advance.

  Kind regards
  Tom

  TestStand 3.5.0
  LabWindows/CVI 8.1.0

  Hello Nick,

  Thank you for your quick response!
  Yes, you are right. That works, I tried today, but...
  isn't this practice as I want it to be. The programmer of a sequence (not me) should take care of the good implementation of a reminder of PostStep to make it work, although he just wants to make a popup. It is not a real problem, but if you use a TestStand MessagePopup command, expected to implement another somewwhere command to make it work. Don't get me wrong, it's just that I don't think that it is a clean solution. And... at least, it is slower.
  I found a tutorial OR a LabView solution for this and two people were asking a LabWindows version. Of course, some are
  interested in this solution. These 2 functions, that I mentioned in my post should work somehow, otherwise they are fools.
  I would really like to know how.

  Thanks again anyway. I'll use your suggestion, if I don't get the problem solved at the root.

  Kind regards
  Tom

• Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.

  Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• How to find the version of the application deployed on wls9 using wlst

  Hello
  
  How to find the version of the application deployed on wls 9.2 wlst wsing. I know that we can use the Mbean version but I did not give any version while deploying.
  
  Say I have an application with name test and the path is c:/temp/test1.ear.
  
  (WHN deploy the app name (test) remains the same, but I could be deployed test1.ear(c:/temp/test1.ear) or test2.ear(c:/temp/test1.ear).
  
  Is there a way to wlst to know what test1.ear or test2.ear is deployed.
  
  Thanks in advance
  Neeraj

  Hi Neeraj,

  Here is the code that you had asked for.

  # START OF SCRIPT

  Connect('vasadmin','vaspassword','t3://localhost:7001')
  domainConfig()
  vasApps = cmo.getAppDeployments)

  for app in vasApps:
  vasAppPath = ' / AppDeployments / ' + app.getName)
  CD (vasAppPath)
  print app.getName () + ': the source path is: "+ cmo.getAbsoluteSourcePath)

  # END SCRIPT

  Thank you.

  Naour Vijay.

• How to include external files when generating Setup for a stand-alone executable file?

  Hello

  I tried to build a standalone executable from my Labview project and I've been able to do successfully.  Now I would like to include a few external .txt files in the installer. These .txt files have parameters and constants that will be used by the program, and my program needs to load / read them during execution.  For now I have to manually copy / paste them into the machine targets, but I really hope that the installer can do it automatically.  In my view, there is a folder "data" in the Setup, and that's where I hope that these .txt files can be added in.

  How can I do? Can anyone give me some suggestions? Thank you!

  Rgds

  Harry

  Right-click on the target project. In your case, it would be 'My Computer'.

  Norbert

• How to include libraries in an application properly

  Hello

  I'm working on a project that uses an external device.

  I installed the software for this device that includes drivers and libraries (.dll files) for use with LabView.

  To connect with the device, I use the block 'create an ActiveX object '.

  I like the Active-X entry, create a new entry and choose the right class in the drop-down list.

  This adds not all the DLLs for the project dependencies.

  LabView seems to be assuming that the necessary files are there.

  I want to install this application on another computer that does not have necessarilay the software to install the unit.

  My application fails. There is no error messages of any missing library either.

  I have to add the necessary libraries manually.

  How should I do this?

  (1) I might add directly the library files to the project.

  (2) I might add the library to my file Installer files, so that they are properly installed with my request.

  I don't know how to do this.

  How to tell the installer to install the files in the library?

  (* what I mean with that is to place them in the appropriate folder. Of course, the application folder is also searched dll when running, but this means that each application has its own dll, which seems to be the wrong approach)

  (3) I might add the file redistributable .exe for setup of my application as an installer.

  I don't know how do either.

  I will add the .exe for the project file, copy it to a place (which one?)  during the installation, and then run this file after completing the installation program?

  Or do I have to add this installation program to the list of "additional installers? It seems we can add only installers of NOR. How can I add my?

  Or y at - it another way, I have to do this?

  Thank you for your help.

  If it's just a dll - you can add it to the project with "always include" in the build specification.

  If it's a dll with dependencies / drivers etc, then it would be best to run their installer to ensure that everything is installed/registered properly as directed by their redistributable.

  You can specify either the user to install the software as a sine qua non, display an error if it is not installed when you run the software and provide instructions on what to do (providing your code at least runs without him).

  In the specification to build, you can specify an executable file to be run after Setup has completed, so you may want to include the redistributable in your Installer and set it.