How to increase hardware acceleration in windows 8 Pro

Similar Questions

• How to change hardware acceleration on Windows 7 laptop?

  I want to check and possibly change the harware on my windows 7 laptop accelertaion followed the instructions found on the internet.

  1. choose Start > Control Panel.
  2. double-click on customization, and then select display settings.
  3. click on advanced settings.
  4. click on change settings on the Troubleshooting tab.
  5. move the cursor to Enable hardware acceleration
  6. click on apply and then click OK to accept the new setting and close the dialog box.
  7. click OK to close the display properties dialog box.
  8 restart Windows

  I got in step 4 but cannot proceed as the possibility to change the settings cannot be selected.

  does anyone know why this is and if there is anyway to change the settings of the selectable option.

  If not is there another method of modification of hardware acceleration

  concerning

  If you receive messages on the need to increase "hardware acceleration", it's because you try to run a program/game that requires performance characteristics more that your machine has.

  You will find the graphics driver that is available only on the computer manufacturer site. With that installed, if the messages yet, your computer is not running the program/game and nothing you can do will change...

• Unable to turn off hardware acceleration in Windows 7?

  I can not turn off hardware acceleration for troubleshoot change settings is grey shadow on. I really need to change hardware acceleration to make the flicker of judgment of the cursor. I have Intel 82945 g GMA. I know that Intel GMA is not the best but I could change the hardware acceleration is Windows XP. Please tell me how to disable acceleration or the slider will upset me to death. I have Intel GMA utility and has no ability to change or disable hardware acceleration.

  My system:
  Windows 7 Ultimate 32 bit
  Pentium 4 3.00 GHz
  1.50 GB OF RAM DDR2
  HARD DRIVE 80 GB
  Intel 82945G (Intel GMA 950)

  Please answer before my funeral! Laughing out loud!!

  Hello

  Method 1: In order to troubleshoot mouse flickering issue, I would say you run the hardware and devices Troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: update the driver graphics card and the mice and other pointing device and then check if the problem persists or you are able to adjust the hardware acceleration.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• How to enable hardware acceleration in FireFox 31

  Please tell us how to enable hardware acceleration in FireFox 31. All of my graphics and other hardware/software is current and up to date. I also paired to my toolbar to bookmark up to 20 entries less.

  FireFox is so slow that a few tabs open cause the 'wheel of doom' suspension whenever I try to enter information or go to another part of the Web site. Sometimes, the breaks are 5 to 10 seconds, sometimes a minute or more.

  I don't have this problem on other browsers I use.

  Thank you in advance for your help!

  Hey, what helped was reset Firefox functionality. I found the idea on this thread of Mozilla: https://support.mozilla.org/en-US/questions/1003863

  Thank you for your answers!

• Where can I activate hardware acceleration in Windows 7?

  Where can I activate hardware acceleration in Windows 7? video

  Hello

  Thanks for posting the request in the Microsoft community forums!

  It seems that you must enable hardware acceleration on the computer. Provide us information.

  1. what exactly is the problem you are having?
  2. you receive an error message on the computer?

  Try the suggestions to turn on the hardware accelerator
  a. open the screen resolution by clicking on the Start button, click Control Panel and then, under appearance and personalization, select adjust screen resolution.

  b. click on advanced settings, select troubleshooting and then click on change settings.

  c. move the hardware acceleration slider to activate video hardware acceleration.

  d. click OK and then click Restart now.

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• How to increase the VRAM in windows 8

  * Original title: windows 8

  How to increase the VRAM in windows 8... Some games do not work because the low VRAM... is - it true?

  I had graphics card NVidia gt525m on my leptop, in the NVidia homepage, if I kept the graphics settings like NVidia high definition and choose aply then became auto selected when I open the NVidia settings... How to remove this problem? that someone has an answer for this? Please...

  Hello

  If you are running a high end games that require more graphics card memory, you can get a prompt to increase the virtual memory.

  If you receive warnings that virtual memory is low, you need to increase the minimum size of your pagefile. Windows sets the initial minimum size of the paging file equal to the amount of RAM installed on your PC, the maximum size equal to three times the amount of RAM installed on your PC.

  For more information, see the link.

  Change the size of virtual memory

  I suggest to install the latest version of the drivers for video card and check if it helps. http://www.nvidia.in/download/index.aspx?lang=en-in

  You can also install the latest version of DirectX and check.

  http://support.Microsoft.com/kb/179113/en-us

  Let us know the results. We will be happy to help you further.

• How to enable hardware acceleration in an Adobe AIR application

  Hello

  As the author of this post How to enable hardware acceleration in an air exe? , I try to activate hardware acceleration inside my AIR application

  If the user has disabled hardware acceleration in the sound settings flash drive, context3d.driverInfo will say "Hw_disabled = userDisabled".

  The only way to re-enable is to open Internet Explorer or Firefox and right-click on a flash content, then check "enable hardware acceleration".

  I (we) would like to be able to reactivate directly inside the AIR application (via actionscript code) and not tell the user to open a browser and check some random boxes (cause you know that it is not very easy to use...)

  A bug has been opened here Bug #3843535 - disable hardware in IE plugin flash acceleration turns off in AIR EXEs and is marked as fixed but nothing is fixed: there is still no way to enable hardware acceleration in a desktop AIR application

  Thank you

  Hello

  I pushed to get this fixed a bug and felt that we have addressed this issue in v16.  Can you share an example of application so that I can have our team take a look?

  Thank you

  Chris

• How to enable hardware acceleration to play solitare?

  Original title: hardware issues

  When I try to play solitaire. He told me to turn on my hardware acceleration. How can I do this?

  You must ensure that the graphics card is at the height.

  I suspect that you have upgraded to Windows 7, so what you have to do now is obtained from the computer manufacturer site and download and install Windows 7 drivers for your graphics card, or, in the case of a desktop computer, go the manufacturer of graphics card and get the drivers for Windows 7.

  If it is not all, you will have to put up with what you have, or go back to the last known good operating system, or update your computer...

• How to enable hardware acceleration of storage

  Hello!

  We have a vSphere 4.1 and a 5 with Eternus DX80 CF-Based storage environment vSphere.

  When I go to Setup - storage, I can see that hardware acceleration is "Unknown" or "not supported".

  What should I do to activate hardware acceleration? It is a feature based on the material that I have to order or is it a software feature that I only need to activate?

  Thanks for your replies!

  Concerning

  schulzman

  "Hardware acceleration features allow your host to unload the specific virtual machine and storage of material of compatible storage management operations. With the help of storage hardware, your host performs these operations faster and consumes less CPU, memory and storage fabric Strip. »

  http://pubs.VMware.com/vSphere-4-ESXi-installable-vCenter/index.jsp?topic=/com.VMware.vSphere.esxi_server_config.doc_41/esx_server_config/managing_storage/c_hardware_acceleration.html

  So if your hardware vendor is in the check with them how to activate

• How to activate hardware acceleration and hyperthreading showed unknown?

  Hello

  I have install ESXi 4.1 on an IBM x3250M3. just wonder how to activate the acceleration hardware and hyperthreading showed unknown?

  Thank you and best regards,

  Kelvin

  It depends on the type of processor.

  The last CPU, there is no downside and a small performance improvement.

  Note that HT not fooled the number or carrots, but increse the number of logical cores...

  André

• How to disable hardware acceleration for the only area?

  Firefox is a great product and I had not any problems so far that I couldn't solve... but:

  Microsoft updated the interface of Hotmail user, Firefox will crash now, whenever I have send an email from this site. This can be "solved" by disabling hardware acceleration, but I don't want to have to endure the inconvenience of it just because of a site... My graphics driver is updated.

  So my question: is it possible to create a work around for this problem? I doubt that the hardware acceleration may be disabled for a single site, but maybe there is a way that allows me to start a new instance of Firefox without hardware acceleration or something like that so I don't have to not go to options, turn off, restart Firefox, check/send emails, go to options again and restart again... any ideas?

  Hello, Bloodthorn, sorry, but the hardware acceleration may NOT be disabled for a single site (and I would like that too if possible), try Mozilla Firefox, Portable Edition and disable hardware acceleration in a portable version.

  Thank you

• How can I change the settings Windows XP Pro so it stops completely rather than go into sleep mode?

  I run Windows XP Pro and am fed up with my PC, switch to 'sleep' mode when I told him to stop.  How can I change the settings so it stops completely instead of sleep mode? Please do not assume that I know computers - a complete manual would be better. Thank you very much.

  Hello Cosmicbbb,

  Thank you for your message.  If you want to withdraw your option set to the option "Turn off computer", you can make the following registry edit.

  Click Start > click Run > type regedit and press "Enter."

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ACPI\Parameters.

  Right-click in the empty space in the right pane and select new | DWORD value.

  Attribute value name

  Then, double-click attributes

  Make sure hexadecimal is selected by breaking 70

  Click OK, close the registry editor and restart.

  Now when you choose to stop the computer in the start menu in XP, you will not be able to choose the day before by accident.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 has been downgraded to XP. How can I go back to windows 7 Pro?

  Computer was purchased from Dell with Windows 7 Pro, but downgraded to XP.  Thus, Windows 7 Pro is on the machine.  How can I get that back to Windows 7?  From now you when you turn on the power, it just goes straight to XP mode.

  Would appreciate a response, so I can install Office 2010.

  Thank you

  Dale

  On Wednesday, October 10, 2012 20:40:50 + 0000, DaleSchriver wrote:

  Computer was purchased from Dell with Windows 7 Pro, but downgraded to XP.

  There is no such thing as a downgrade to Windows XP. You had to make a
  new installation of Windows XP. Exactly how did you do?

  Thus, Windows 7 Pro is on the machine.

  "So?" Why you say that it is on the machine? How do you know? Or what makes
  Do you not? It probably isn't.

  How can I get that back to Windows 7?  From now you when you turn on the power, it just goes straight to XP mode.

  Would appreciate a response, so I can install Office 2010.

  You do not have to be equipped with Windows 7 to install Microsoft Office
  2010. as long as you have Windows XP SP3, it can run 32-bit Office
  2010.

  Ken Blake, Microsoft MVP

• How to change the language of windows 8 pro homescreen?

  in fact my friend bought a new notebook in which he has installed windows 8 pro assistance from the manufacturer of the laptop service center but its home screen is in hindi (Indian language), he wants change in English but it is not possible, he also tried to sign--> language and the clock settings, but not use. Please help!

  Hi,.

  Thanks for posting your question in the Microsoft Community.

  I understand the inconvenience caused to your friend and I will definitely help you.

  According to the description of the problem, it seems that you have problems with changing the language of the home screen.

  1. press WIN + R to launch the dialog box RUN. Type regedit and press ENTER. It will open the registry editor.

  2 now go to the following key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SystemProtectedUserData

  3 under "SystemProtectedUserData" key, you will see a key with the name similar to S-1-5-21-x-x-x-x. Under this key, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SystemProtectedUserData\S-1-5-21-x-x-x-x\AnyoneRead\LocaleInfo

  4 key 'LocaleInfo' is that we need to change the format of date and time screen locking. This key contains all the required information has been stored in the INI file in Windows 8 test versions.

  5 click the 'LocaleInfo' key and in the right pane, you will see strings such as:

  • Calendar
  • Clock
  • GeographicRegion
  • Language
  • Nomlocale
  • NativeDigits
  • SubstitutionMode
  • TimeFormat

  

  6 we will play with only the following strings:

  • Language
  • Nomlocale
  • TimeFormat

  You may need to take ownership of the registry key before you edit it. Please consult this guide to learn how to take ownership of a registry key.

  7 first talk time format. If your Windows 8 lock screen shows the time in 24-hour format, the string "TimeFormat" in your base of registry Windows 8 could be defined to hh: mm tt. Change it to hh: mm tt and it'll start showing the time in 12-hour format.

  

  Same principle applies to the 12-hour format. If your Windows 8 lock screen shows the time in 12-hour format, the string "TimeFormat" could be defined to hh: mm tt in your system. Change it to hh: mm tt and it'll start showing the time in 24-hour format.

  8 now turn of display language. If you want to display the name of the day and the date in another language on the lock screen, you can change the values of the nomlocale and channels of language to your language code of your choice.

  For example, if you want to display information in the Hindi language, change the nomlocale string values and the language on the screen - IN and lock will begin showing the name of the day and date in Hindi language.

  

  You can use any language code such as en-US for English, en - us for German, en - US for the French, ru - RU, Russia, etc.

  Here are a few screenshots of Windows 8 lock screen showing the name of the day and date in various languages:

  Windows 8 locking screen information in German:

  

  Information about Windows 8 Lock screen in Russian:

  

  If you need help, reply to this message.

  Ashwin

• How much of my computers download Windows 8 Pro using the disc?

  Original title: windows 8

  I bought Windows 8 Pro for $ 39 and also bought the drive... I've downloaded on my desk... my question is how many of my computers can download Windows 8 Pro using the disc? Thank you.

  1 license, 1 computer. You can use the same disc but to update multiple computers if you have additional product keys (licenses).

  How to buy additional keys:

  Press the Windows key + X

  Click System

  Click on see details in the Windows Activation

  Click on the link: buy Windows to another computer

  http://www.Windows.com/buy

  Yes, you may be prompted to go through the installation routine with just the web installer of 5 MB, but you don't actually have to download, simply to purchase and the product key will be presented to you in the Upgrade Wizard (you also a copy is sent to your email address).