How to increase image quality when importing from Illustrator?

Similar Questions

• Image overwritten when importing from Photoshop

  I imported a single Tiff file from photoshop and it seems squashed vertically when importing (about 5% but still). Anyone seen this before? I tried to export, but it seemed always crushed. Any thoughts on what it can be.

  Ahh thanks! It's the dv ntsc.91 d1. I changed to square pixels and we are ready to go. I'm experimenting with HD, so that's probably why I changed it at the beginning. You have any good links to the production of 32-bit projects? Leave and other parameters. realistic limits etc...

  (PS I have always the possibility here to select answer)

• Loss of quality when importing video to the editor. What should I do?

  I did a HD video with my camera and need to change it, but when I import it into Adobe Premiere elements 13 quality decreases. How to maintain the optimal video quality when importing it?

  Arthurs

  What version of Premiere Elements and on what operating system works - it?

  What is the brand/model/parameters of the camera that records video? What is the file extension that is associated with the file? What is the bit rate of the file that is imported?

  Is the decline in quality import and when you watch the video in the Edit area monitor? Or do you see loss of video quality when you view this Timeline content export? When you view the video in edit box monitor, you're looking at timeline rendered or unreturned content? No coloured line, orange line or a green line on the content of the timeline?

  What you are (manually) or the draft definition (automatic) the project preset to match the properties of the video source? Please tell us what the readings are for the fashion edition of time base, image size and Pixel Aspect Ratio (even if the appearance of the gray fields) under Menu/change settings/general?

  Many more questions on dating on your video/graphics card version of the pilot and others, but let us examine and consider the foregoing and then decide what then.

  For any question or need clarification, please request so that we can customize a response for you.

  Thank you.

  RTA

• How to remove all the pictures imported from my I phone 6

  How to remove all the pictures imported from my I phone 6

  Imported from the place where?

  If they were imported from your computer, you remove the same way that you put on there: by syncing with iTunes. to remove them, you need to synchronize an empty folder, or simply turn off the Photo in the form of synchronization option summary pane when the iPhone is connected.

• Images not showing Up when importing from another photographer catalog

  I am an editor for a wedding photographer and I had this problem happens often, and I don't know what is the cause. I can see all the information behind the image, the ranking and if there is no previous editing on it, but the image itself is not displayed. The photographer sends on the catalogue, forecasting and intelligent preview. There are moments that all transfer perfectly and other times the images are not there.

  We tried to delete everything on both ends and start making sure that everything is done correctly, but it still happens. I tried to discuss with the support, but they have not been able to help. Whenever this happens, I lose money because I can't be their editor. We have both the most recent LR so it's not the question.

  How we are currently transferring Weddings:

  She takes is export as catalog with preview and intelligent preview. Once it's she will post the three files (catalogue, smart overview and overview) on Dropbox and sends them on. When I get it, I download the catalog of smart zip preview and preview of the zip. Once downloaded, I extract the prediction and intelligent preview. Can I go to file > import from another catalog... I click on the catalog file and select choose.  Sometimes it works and other times it does not.

  What we're doing wrong?

  

  OK, so after talking with Adobe on two different days, then post it here, I called Adobe and they set about 5 minutes. Here's what he once let him access my computer...

  (1) closed LR

  (2) he checked my monitor has been fixed by default sRGB as shown above.

  (3) then it went to the folder and change the smart preview to a different name by putting .old to the end

  

  (4) then instead of extracting the zip file it opens the zip file and copied the file and pasted with other files

  

  (5) opened LR and images where it!

• How can I remove the originals, I don't like to take when importing from a SD card?

  Hi all

  Just installed LR3 with Santa. Have been going through the videos and the Lightroom_3_Help PDF and PDF of Lightroom-GettingStarted_Lo but I can not understand how to remove files from the gitgo simply importing from an SD card or from my HARD drive (files already moved on the HARD drive but not yet slaughtered or imported into LR3). I was hoping that I could, at the LIBRARY, just r/c on a file that isn't obviously useful to keep and just remove it so I mustn't do it later. Looks like I could, thus, be able to focus more on the shots requiring a change.

  Also, need suggestions as to how I would like to import my files using the DNG, Copy, Move, or Add. First off, I'm not a pro at work but am an occasional serious amateur. I'm picky and I like things look the first time and I like options.  The pix already on my HARD drive is in the IMAGES folder. those that are imported from the SD card are transferred to the PHOTO folder. I have, in the past, moved the verssions transformed to another DESTINATION folder - now I still have the originals and I've dealt with copies to show and share.

  I understand that LR3 don't ND edition but I guess that if I don't keep a DNG so anytime I want a JPEG or PNG image that I open LR3 to make a. Since I've been taking a few hundred pix per year (although this will change with my new D5000) I won't load to the top of my HARD drive any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a JPEG or PNG copy turned in my DESTINATION folder in one swell foop?

  Thanks in advance,

  Phil in San Diego

  There is no need to delete the source; Select the photos you want to copy the source into your library and apply metadata and keywords that apply to all, then back up the photos that are now in the library, and then only have to format the SD card. Using this method, you will never have to worry about the photos of the source should be deleted, you simply focus on which those that are imported. Your also always make sure to have two copies of your work at all times and consider make a third copy you should kee off site to maximize the availability of your data disaster (and don't foget the catalogue Lightroom itself!).

• How to get the best image quality when you insert PDF into Word?

  I am able to insert a PDF file as an object in Word, but the image quality is a bit fuzzy.  Is this what I can adjust in order to improve the clarity of the image in Word?

  You can try to extract the images with the help of extract all Images or select only the parameters of the screen recording you get when you save in a DOC, but I think that the general result is that the image recorded with the same resolution as shown in the PDF document. It may be that you simply adjust your screen in WORD. You can look at the picture in WORD and see if it is used at 100% or some other resolution. Bitmaps are not very forgiving if the resolution is changed to the document and not as something other than the small number of fractions of resolution appears change.

• my image quality when using photoshop on my ipad Lossing pro, do you know why? Thank you

  Usually, I imported the image of my Nikon D750 directly into my pro Ipad so I can edit them with Photoshop but at the end, when you try to print my photo the image quality is really bad so I can't print it?

  Any help would be much appreciated.

  Thank you

  Hello gusphotographe and Andrei!

  Unfortunately, the RAW files are not fully supported in Fix or Mix. That's why you can be faced with problems with degradation or trouble to open the images. I know it's frustrating, I apologize for the inconvenience!

  Please let me know if I can help with anything else.

  See you soon!

  -Kathleen

• Problem of image quality when you print the brochure in PDF format

  Hello!

  I searched the whole web, trying to find a solution for my problem, but I couldn't find anything...

  I created a vertical page A5 document in InDesign CS6, filled with high quality photos. Now, I want to print in a brochure (in PDF format) in order to save it and print it in a professional facility.

  The problem is when I do this, the image quality turns out to be terrible...

  I checked my print settings and I can not find something wrong...

  Installation - A4 horizontally, and Graphics - Images - send data - is set to all.

  Is there anything else I can / try? What can I do it wrong?

  Here is a picture of my print settings:

  

  When I export the document normally in format PDF the image quality is fine, but it doesn't have the booklet layout I need, it exports all single A5 pages one after the other. If I try to print this pdf file as a booklet in Adobe Reader, the same thing happens to the images, they lose quality.

  Help, please!

  Thanks :))

  tepatroni wrote:

  Now, I want to print in a brochure (in PDF format) in order to save it and print it in a professional facility.

  Have you checked withthei 'professional establishment' as to what they want. Printers will not, in general, impose you the document. It's their job and they do it in a way that corresponds to the study and the equipment they use for printing.

  That said, your problem with low quality images is probably the default PDF settings. Change them to something useful in Pringter in the Windows properties, or click the settings button in the print dialog box to access the driver from there and set them as you want. I'm sure that when the default installed PDF printer is 'standard' gives you the output of RGB 72 ppi.

• LR 2.3 freezes when importing from CF card reader photos

  We use LR for some time.  Repeatedly noticed when import a few hundred new photos than LR 2.3 will freeze for importing photos from a CF card reader (Lexar Professional Player and Lexar CF cards).  The computer must be rebooted which causes corruption catalogue and had to start all over again. I use an iMac (3.06 GHz Intel processor dual core) with 4GBs of RAM and 800 GB HARD drive.  All the operating system software are uptodate.  I was wondering if others have the same problem and what, if any, work arounds could be out there.  Adobe does not have this problem on their Web site.

  Image capture is an application that ships with Mac OS X. It can be used to control what happens during a reconnaissance of the card, but it is not necessary. I have my Mac configured to simply use Finder to copy maps, if for some reason, I use LR.

  I think that once you reformat your card, you may find LR will very well be important.

• View Feature Pack - RTAV: how to increase audio quality

  Hi, we test see 5.3 with feature pack installed. RTAV is really great, especially with the webcam. But the audio quality of the microphone is limited to 8 khz and there seems to be a strict limit.

  There is a VMware KB explaining how to increase the video, but not for audio quality. Is there a way to change the audio settings for RTAV? And if not, why this very low limit? We understand 8 kHz is just OK for Skype calls, but it could be better.

  PS: We use Windows client 2.3 and invited is Windows 7 x 64. Thank you!

  Hello

  Unfortunately at this time - you are right that the audio is limited to 8 kHz, mono.

  This is something, that we thought do adjustable - but until your post - we have had no feedback that we had to and so it remains at this since the original sampling rate.

  Would you be willing to explain your use case to better understand the needs and identify what kind of audio controls you would like to see.

  I can't promise we will be in work, nor provide a time scale, but given your comments will definitely help.

  Thank you very much

  peterB

• How to copy /images/ is when there is no directory ...\Apache\?

  My head's spinning... Need help!
  
  Background:
  My apex Oracle 4 works well on 10g except that the CARDS do not WORK. I upgraded Apex 3 recently (which worked well) and is replaced with oracle_home\apex\images content directory using files pointing to http://my10gserver:8080/i/web. I got errors during the copy of the files and apex 4 did not immediately after several attempts to redo/i /. I still think that not all got copied in/i/correctly being the reason for not working cards.
  
  Problem:
  Everywhere I look (Oracle docs) or OTN instructions must "xcopy/e/i APEX_HOME\apex\images ORACLE_HTTPSERVER_HOME\Apache\images". The problem is that I do not HAVE the directory ...\Apache\ anywhere on the server, nor do you marvel.conf file referenced in the same context.
  I have apex 4 running on 10g on another machine and everything is OK there including graphics but still no... \Apache\, not marvel.conf...
  
  Issues related to the:
  1. why my installation standard apex / 10 G doesn't have a directory \Apache\images (never had even when I was on apex 3) while working?
  2. do I really need to worry about having this directory at all if my apex works very well (including graphics)?
  3 the ULTIMATE question. How to move my directory is correctly following the instructions, if I can't find ...\Apache\ and WebFolders approach does not seem to work.
  
  Thank you!

  Hi gleb,.

  which web server do you use to host your APEX? Looks like you run APEX with EPG. If so, you looked in the wrong part of the installation manual. You should consider this article that describes how upadte the images in your database:
  http://download.Oracle.com/docs/CD/E17556_01/doc/install.40/e15513/otn_install.htm#BHAJIGDA

  -Udo

• Windows Vista stops working in iTunes as soon as he plays the first track when importing from CD (APPCRASH). Help!

  Windows Vista has stopped working error back in iTunes as soon as it reads in the first track when importing CD and must close the program (APPCRASH). I uninstalled and reinstalled a newer version of iTunes (currently empty) several times. Also, ran the CD diagnostics in iTunes and seems OK. I'm on Vista Home Premium Edition. If it helps, I saved the CD Diagnostics in ITunes and the Windows APPCRASH info. I spend several hours of research and try to understand it. Any ideas?

  Thank you for your response. I actually solved this suddenly. I've had my laptop plugged into a port replicator to access devices. I decided to try to unplug, restart and try again. It worked! Do not know why the replicator program caused crash but it seems to work...

• Import from Illustrator to After Effects

  Hello

  I can't import an Illustrator file into After Effects. The project of the Illustrator has seven layers. Import the file by selecting import into After Effects > name of file > import as composition by keeping the dimensions of the layer.

  In the timeline panel, there are 7 Illustrator layers, however, all the things on the other layers seem to have moved to the top layer because it is the only layer that controls anything; opacity, position etc.

  Anyone know what is happening?

  See you soon

  Your description sounds like not create you layers in Illustrator.  You need to do.

  You probably just have a layer of 1 of your Illustrator document.  You create layers 2-7, moving things in each layer, and it is also good rename each layer with something that makes sense.  Hardcore artists Illustrator blow that right away.  In the case of a human body, they would be the eye right, where eye, head, torso, right arm, left arm, right foot, left foot.  Just double-click on the name of the current layer and re - nominate away.

• When importing from cd, the tracks are alphabetical instead of in the order of cd.  How to fix?

  iPod Nano 7; don't know the operating system.  When you import a cd, the Tracklisting on iTunes is alphabetical instead of in the order of cd.  How can I fix?

  It's not really a "fix."  (because it has not broken)

  If you are looking to your library iTunes music using the songs view, which displays a simple list of songs with columns for song information (such as name, artist, album, etc.), you can change the sort order by clicking on the header of the column used for sorting.  To sort by album, click on the header of the column of the Album .  It sorts alphabetically by name of the album, and songs in the album are sorted by track number.  To sort by artist, click the header of the column of the artist .  It sorts alphabetically by artist name, then name of the album within the artist, and songs in the album are sorted by track number.  You can sort by any column.

  NOTE: To reverse the sort order, click on header of column again.