How to increase strength signal wifi on ea2700

I have a problem, got my router fi wi ea2700 in the House it works fine no problems at all. I ran a cat 6 of my ea2700 of my metal 30' x 30' (approximately 85 ft) construction and don't have internet access on the South side of the building for laptop on the desk, still very well no problem. now the problem, my wifi in the metal building signal is low (for mobile phone wifi), and I need my cat 6 on the north side.  I have some wanted something that I could plug it into my cat 6 that would give me a lot of wifi and at least 2 ports for cable cat (1 for laptop on the bench and 1 for the Office on northside. thought to a long-range unifi but no port so no thought to Linksys RE6500HG AC1200 Dual-Band Wireless Range Extender but it must have the right signal to begin with. I could plug my cat6 in a splitter 5) port then run 1 line of unifi long range (I would be close in this building 30 ' x 30' to use this) it would be exaggeration to ginormous. run right 1 down to my laptop and 1 line of northside for desktop computer. or am I way off track is there a cheaper easier better way maybe just an another linksys wifi ea 2700 with her would have ports but can I run online them like this they would be compatible in this config. any help would be greatly appreciated. Thank you.

As long as the strings are different between the main building and the remote access point, you will be fine. Put the wifi from the main house to channel 11 and channel 1 wireless remote. You can use the same SSID and PWs name on two wireless access points.

Tags: Linksys Routers

Similar Questions

  • How to increase the power of the signal microsoft virtual wifi adapter

    How to increase the power of the signal microsoft virtual wifi adapter? How change the virtual wifi for my external usb wireless adapter and make it work the same?

    Hello

    I suggest the following methods and check if it helps.

    Method 01:10 tips to help improve your wireless network

    http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=poyhbeDlRAP

     

    Method 2:

    (a) plug your modem wireless on one of the USB ports on your laptop computer and if necessary, turn on the modem.

    (b) right click on the "Network" icon in the lower right of the desktop and select "Connect to a network." Wireless modem will now be recognized as a network card.

    (c) right click on the name of your wireless modem and choose "connect".

    (d) enter the user name and password of the account that you put in place with the wireless modem provider.

    (e) specify whether you want the wireless modem to automatically connect to Internet or not. You can choose to have the modem connects automatically, unless you are in a roaming area.

    (f) press "Continue" to complete the configuration of the wireless modem and start using it as a wireless adapter.

  • Equium A100: How to increase WiFi range

    Hello

    I have an Equium A100 and wondering if I can increase the wi - fi range with any form of add the accessories?
    I have to balance my laptop on the windowsill of my apartment to pick up my more close to 'hot spot '.

    Any ideas?
    Thank you.
    Gus

    Hello

    You can increase the range of WLan and performance, but you will need a Wlan antenna.
    For example, like this [external Wireless USB Adapter | http://www.wirelessnetworkproducts.com/index.asp?PageAction=VIEWPROD&ProdID=1624]

    On [this page | http://www.wirelessnetworkproducts.com/index.asp?PageAction=Custom&ID=21] there are also a few tips and useful explanations on stronger WLan range:

    How about a litte film ;)
    Check the Youtube how to increase your Wi - Fi Signal. It s nice and sometimes incredible ;)
    http://www.YouTube.com/watch?v=LY8Wi7XRXCA

  • How we increase the y-axis (amplitude) of the audio tracks?

    How we increase the y-axis (amplitude) of the audio tracks? My patient seems to have flatlined. I don't want to increase the gain, just the way the waveform looks like on my monitor.

    DrDtMM

    'Expert opinion' is a part of the new interface of first elements 11. In version 10, you have the timeline and stage line discovers the choice.

    For now, I will assume that you are in the view of the timeline where you use the video and audio tracks and not a strip of film with slots of the scene.

    I suspect you may be after the following. Let's wait and see.

    To the right of the where it shows the "Audio 1" name is a microphone icon. Representing the 'Audio display Style. There are two Audio display Styles and you can select either by activating / deactivating the microphone icon.

    a. in a case, you will see the waveform, plus an orange horizontal line which is in general the rubberband of Volume for Volume set. This display Style has a light green background.

    and

    b. otherwise, you will see a dark horizontal line, any waveform. This dark line is on a light green background.

    I suspect that you are in 'b '. Are you aware that 'a' exists.

    If you want a version really blown upward from 'a' to watch, you could separate the audio from the video, double-click the audio signal in order to open the preview windows and adjust to the top of the preview window.

    We will follow your follow-up to the top see if we get in sync.

    Thank you.

    RTA

  • How to increase the size of the tabs?

    http://i.imgur.com/pMYJr4r.PNG

    I've been optimizing the menu bar to save as much space as possible and I'm frankly pleased with what I got, with the exception of a fact of monkey - tabs are too small, because the space is taken by the address bar. How to increase the length of the decrease address bar bi-bouteille tab?

    Hello VladimirVilimaitis, you might try the following extension: https://addons.mozilla.org/firefox/addon/custom-tab-width/

  • How to increase the size of the menu bar?

    My bar menu and all the buttons at the top suddenly, all are much smaller. Any ideas on how to increase the size of the top of the screen? IM talking not about the size of Web pages, just the menus up to the top.

    Don't want to use the menu bar and not the Firefox menu button?

    See also:

    You had previously placed all the items in the Menu bar?

    You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

    See also:

    An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

    You can watch this extension to adjust the font size for the UI (toolbar).

    You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • Toshiba 24W1433DG - how to increase the size of the subtitles

    Good evening.

    I bought model lcd 24W1433DG I
    in trouble in subtitles divx, movies meto a pen and turn the LCD screen and all the subtitles of movies are very small and the big give computer... I went to the maximum value and the 30, but the legend is small (I mean the subtitles of attention for divx movies) would like to help

    How to increase the size of the subtitles.

    Thank you

    Message has been translated

    Hello

    As far as I know, the size of the subtitles can be increased.

  • My internet speed is too low. How to increase internet speed?

    I use the broadband internet connection. I check my internet speed.
    My internet speed is too low. How to increase internet speed?

    Message was edited

    Hello

    : D you can not increase the speed of the internet!
    It depends on your internet service provider and only the ISP can increase!
    If you have some problems with the speed of data transfer, I recommend contacting your internet service provider!

    Good bye

  • Re: How to increase the memory dedicated 32 to 128 on Satellite C850-B906

    How to increase memory dedicated 32 to 128 on Satellite C850-906 on 8 to WIN?

    The word product specifications it can be up to 781 MB shared memory with 2 GB of installed system memory and up to 1 696 MB with 4 GB of memory system, (with a Windows® operating system 7 64 - bit).

    Here is the link of the specifications
    http://www.toshibamea.com/ComputerProduct/4/Satellite_C850-B906/52424?PageID=4

    HELP ME PLEASE

    What you need to do is upgrade RAM. As you can see in the specification, you can improve up to 16 GB. It is about.

    You can buy an additional module more than 4 GB or 2 x 4 GB / 2 x 8 GB.

  • How to increase the video memory on my Satellite 1800-254?

    A friend give me a Toshiba satellite 1800 Lalonde - 254 s for use only watch movies for my kids. With graphics memory, it has its impossible to reproduce movies, so I increased the RAM to 512 MB graphics memory is 8 MB. How I increase the graphics memory? Is it possible?

    Thank you very much

    Titanico

    (Excuse my English, I use a translator)

    This old laptop has a graphics card with shared memory. In other words, when you have more RAM inside more memory will be used for graphical operations. According to the specifications of the laptop this old notebook was shipped with 128 MB of RAM, but can be improved up to 512 MB.

    Trying to find internet modules two PC100 256 MB with part number PA3069U - 1. 25 M and update.
    That's all what you can do about it.

  • How to increase the size of the print?

    I think that I did something and now I am printing is very small fonts that I can barely read.

    Can is it you pls let me know how to increase the fonts 'impression '?
    TKS a lot, Marco

    Your browser > file > Page Setup >scale

  • Tecra A8 - 103 - how to increase memory for video card?

    Hello

    does anyone know how to increase the memory for the video card on my Tecra A8-103?

    I've heard that I can 'take' of RAM memory and 'Add' to video memory card, but don't know how? I just live in the BIOS, but have not seen this feature?

    I need, because, when I work in Visual Studio .NET and pass code for fashion design, an image disspears and I have to wait 15 to 30 seconds until :(((back what the image

    Therefore, I do not think that increasing memory video card will solve this problem?

    Thank you x 10 in advance

    You cannot pass the VRAM chips, they are soldered to the circuit board.

    On some machines, you can dynamically increase the VRAM by installing more RAM System. Enjoy reading your user manual.

  • Satellite A300-148 how to increase the size of the graphics memory?

    Hello..

    I have satellite a300-148, I update my laptop RAM from 1 to 2 GB but the VRAM is always 128 MB. and in the toshiba site write this:

    ((Graphics Adapter:))
    Manufacturer: Intel
    type: Intel® GMA X 3100
    memory: up to 358 MB total graphics memory available with 2 GB of system memory
    memory type: shared))

    But my laptop no graphics card (intel GMA X 3100) is (mobile intel 965) how can I solve this problem?
    There are different between the two adapters? How to increase my laptop memory graphic size?

    Please help me...
    thanx

    Hello

    > How can I solve this problem?
    Problem? What is the problem?

    Take a look here on this page of the Toshiba hardware specification:
    [Satellite A300-148 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 150445]

    Laptop supports the Intel® GM965 Express chipset but the graphics chip is Intel® GMA X 3100
    As you can see the type of memory is shared
    What does that mean?
    This means that this graphics card shares memory with the main memory. Everything is controlled automatically by the graphics driver.
    If the memory of the graphics card is required then graphic driver would assign memory automatically to GPU.

    I hope this helps...

  • Satelite C670-1DW: how to increase shared memory?

    How to increase shared memory for display from 64 MB to 512 MB?

    Hello

    It is not possible.
    You cannot change the value manually the graphic card driver controls cela and it changes automatically.
    In addition, your laptop supports an internal graphics Intel HD (HM55) card and this chip is not really suitable for the game.

  • How to increase the number of addresses in the BCC field?

    How to increase the number of addresses in the BCC of email field?

    What do you mean by increase in the number of addresses?  The CCC line will continue to accept addresses that you add them in there. Keep just by typing in the addresses separated by a semi colon ";

Maybe you are looking for

  • HP 2000 laptop: HP Notebook WILL is NOT updated with DAY 2000!

    Hello, I hope I'm in the right place.I am asking for help because my laptop HP 2000 absolutely REFUSE to update. So far, he has accumulated (114) updates. Whenever I try to install, one of two things happen: it stalls at the "Download update/Initiali

  • Acquisition & savings with smart camera

    I couldn't find an example on the recording of the images of the sequence to hard drive with Ximea smart cameras. I have a RL50C smart camera. I want to acquire and store images on the hard drive. Because I don't have a LabVIEW installed in this unit

  • Want 5530: Printer calibrates whenever I turn it on

    I bought a second 5530 want all-in-one printer.  No problem with the first, but it has begun to insist that I have to calibrate whenever I turn it on.  It wastes ink, paper and time.  Whenever I turn it on, the printer displays a message that I have

  • HP pavilion p077tx freezes

    I bought this laptop from your company pavilion p077tx 3 weeks... in starting up, it worked fine, but now, every time when I turn it on it hangs after 5 minutes, I have to use the power button to turn it off... What do I do?

  • E-mail address is associated with a name, but is not in the Windows Contacts

    How to remove an email address that appears with a Contact name, but is not in the Windows Contacts?