How to install drivers lost after complete cleaning and installation of xp?

I was given a ze5170 Pavilion older to use as support for a system to work.  He has problems.  It has been completely wiped clean (HD) and had Windows XP Pro installed.  None of the quick work keys, volume up / down / mute are not displayed on the screen.

I would like to re - install the drivers but can't seem to locate them as stand-alone dll or exe download.  HP Driver Detective does not load, error 'cannot initialize' so can not go this route.

Clues as to where I can get independent drivers?

Help would be greatly appreciated.

Peetywondr

Vidya,

Thank you very much... all my functions are back and excellent operation.  I can't thank you enough.

Any other reading of these "fixes", he is the one that has worked 100% for me.

I can't get the link of "Congratulations" to work then KUDOS to you!

Tags: Notebooks

Similar Questions

  • Satellite L300-19F: how to install drivers?

    Hi, I would like to know, how to install drivers for Satellite L300-19F and what order to install drivers?

    Because I have somes drivers that I can't install it and I have a component without a driver.

    Thanks a lot for your help!

    Post edited by: XatOr

    Hello!

    Install the drivers, you can t and normally, you will find all the drivers on the Toshiba driver download page.
    Did you install Windows XP or Vista?

    I have a Satellite L300 too and install the as far as I know this is right:

    After installing WXP continue with
    Driver Chipset
    Display driver
    Audio driver
    Driver modem
    Common modules
    LAN driver
    WLAN driver
    And so on with drivers

    Continue with the tools
    Controls
    Utilities
    Hotkey utilities for display devices
    Press the start/stop utility
    Energy-saving

    Good bye

  • Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

    Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

    On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

    Hi Gordon

    I just downloaded drivers from the Dell website in support of xp

    I have tried to reboot from the XP cd but got the following message when I tried to install

    "This program is blocked due to compatibility issues"

    Program - the installer of Windows

    Editor - Microsoft

    Location: D:\1386\winnt32.exe

    Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

    I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

    You say that you have started from the XP CD, but something is wrong with that
    you do. Just boot from the CD and follow the prompts for a
    clean install. A new installation by formatting the
    drive and does not care what version of Windows is installed (or
    even if any version of Windows is installed.

    Ken Blake

  • How to install 11 elements after you download it?

    How to install 11 elements after you download it?

    go to the folder where you saved the download and click on Setup.

  • I am trying to reinstall photoshop elements 10, however, when I upload 2 recommend files for window and try to double-click the file of the application to install. He is still blocked and installation stop repsonding to 92%.

    I am trying to reinstall photoshop elements 10, however when I download the 2 files for windows is recommended and double-click file from application to install. He is still blocked and installation stop repsonding to 92%.

    looking for an incomplete 7z file.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • How to stop xp lost / forget my password and force me to restart after only one or two days of availability editions home and professional

    Title says it pretty well, but it is on two different AMD multi-core cpu with a list programs installed for the most part identical and quite long.  I hope that it is a problem of xp, someone has already found and fixed even if I don't the have not found in several searches.  Before that everyone assumed that I forgot my password, let me assure you that is not and has not been and will not be the problem; but when (after one day or more available), I'm trying to connect with my correct password, xp persistently asks me if I forgot it and of course, this means I have to restart, with its side effects, in order to refresh the memory of xp apparently and allow me to connect.  For what it's worth, in this case, no matter if I 'disconnect' screen lock or me with the Windows key + combination L or even to pass time until the locking screensaver mechanism is used automatically.  It seems that over the years something in a few key file or registry or RAM or what is get corrupted, but what is the solution?  I don't remember what happens until fairly recently, so can it be caused by something changed by one of the most recent Windows updates?  Another thought that occurs to me would be whether there all known software conflicts have caused something like this?   I don't run a server, but I have still xp does not have to be reloaded every day or almost and prompt me to worry what else may be getting damaged as well as my password.  I've kept ZoneAlarm Extreme Security uptodate and analyzed regularly without viral invasions/epidemics coming to my attention, so I am at a loss to point a finger there, too.  All my other software is widely used, as surely as if she caused this problem, others would have reported such a conflict before now (?).  Oh, and I don't do betas (unless you count an occasional Release Candidate), so I don't have this kind of problems.  I know that's not the most urgent global problem, but it always makes me think for a moment, what happens if he loses or forget my password - so what I'll do if the restart does not resolve, even if only temporarily.  I guess you could consider my reboot of a workaround, but I want to find is something that is more durable than all of this, please.  I understand there is a somewhat similar problem involving mode XP of Windows 7 and apparently it may concern unique aspects of this OS, but maybe there's an analogy?  Also, is there a limit to (or how to limit) the number of times where XP will connect a particular user (or user attempt?)?   If so, I would like to know how and where this can be changed, to see if it helps me everything.  Remember, however, there must be something that will work on Home and Professional Editions, that's why he left me speechless.  Oh yes, I want to emphasize that both of my computers are free standing without any local network operating, etc., just a router to access internet and shared printer.  If there is more information you need from me, just post a reply with what you want and I'll try to get back with her in 24 hours, if possible.

    Hi victorwhitehead,

     

    Method 1:
    I suggest you perform a SFC scan and check.
    To Perform a Scan SFC -

    a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

    b. type the following command and press ENTER:

    sfc/scannow

    A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time

    c. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    d. once the scan is finished, close the command prompt window, restart the computer and check.

    Check the link for more information on CFS below the scan mentioned:
    http://support.Microsoft.com/kb/310747

     

    Method 2:

    You can check if the hard drive has errors or corrupt, sectors that is causing the problem. Refer to the below provided the link and follow the steps provided to check and repair corrupt hard disk sectors:

    http://support.Microsoft.com/kb/315265


    Method 3:
    Step 1:

    If the computer keeps restarting I suggest you to check the hardware of the computer as the battery of the bios, bad diet, loose cables, etc.

    As yu may refer to the article below and check, if you can boot into safe mode in Windows XP. Refer to the below section to start in safe mode.
    http://support.Microsoft.com/kb/315222

    Step 2:
    If you are able to start properly in safe mode, then you can perform a boot clean and check for exactly the problem.
    To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -
    http://support.Microsoft.com/kb/310353

    If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual and check:

    a. Click Start, type msconfig.exe in the start search box and press ENTER.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    b. on the general tab, click the Normal startup option and then click OK.

    c. When you are prompted to restart the computer, click on restart.

    I hope this helps.

  • How to install a driver after you turn off the auto-update

    I disabled auto-update Windows Update drivers by following the instructions in the following article:

    It was due to the update of Windows Installer drivers on top of my existing bluetooth drivers and prevent the unit to work. I had to reinstall Windows to solve this, UN-installing then the installation of the Dell printer drivers did not work.
    I just bought a Freecom 2 to drive that connects via eSATA. Unfortunately, the instructions say that I don't need to install drivers because Windows will do it automatically! Ugh.
    I am reluctant to turn to the auto-update as it will probably destroy bluetooth again. So the question is: How can I install Freecom drivers and the problem of bluetooth do not breed take the risk?
    Note: Looking at the dialog box "want you Windows to download the driver software? ' there is an option to" install the driver software from Windows Update if it does not appear on my computer.
    Well well... driver Dell bluetooth software is on my computer (the software to install, it is on my C: drive and it is also installed) so not preventing him to get the version of Windows Update? I am concerned about the confidence that, given that the driver has been installed also the last time he downloaded the MS driver (although the auto-update feature was turned on at that time here). I'm afraid to think that the Dell driver's oldest (who is) and so he gets crushed.
    Thanks in advance.

    "the fact that the manual says that he needs a driver to be"automatically installed by the operating system"suggests that... he needs Windows Update."

    (1) while I don't have an external HARD drive in a box I have a case of a slot for external e-SATA replaceable hot which is about the same as a commercial external HDD, but without the box.
    When I plug in a HARD drive into the slot in Windows automatically detects the drive.
    Windows should automatically install the drivers for basic/generic for most of the devices when it detects something new just to be attached/connected. Once Windows did, this 'device' must be posted from there on.
    This is not the same thing as let the Windows updates to install the drivers.

    So, when you plug in the external hard drive on e-SATA port, the first time Windows pops up a similar message to-"new device detected... the driver installation, you can check if the device is detected and drivers are installed by going to computer management > Device Manager to see if your external HARD drive is on the list of hard drives."
    If non - R / click on hard drives and click "search physical changes.
    There is also an option here to update the drivers.

    You are quite correct disable optional updates.
    It is not a recommended option, especially for the graphics drivers and chipset.
    Personally, if the mfg of the material provides drivers on their website always download and install the drivers manually.
    As a result of that it is prudent to updated Windows configuration only updates are available so you can choose which you want to install and choose to install it on your own time inform.
    This way you can close applications and browsers and better to avoid the possibility of corruption updated leaving the priority update. It is also
    more course with a clean install of Windows to start with sp1, and then do the other updates in small batches.

    2. when the HARD drive is connected and recognized in the Device Manager are moving
    for the computer management > disk management. This shows the good
    for HARD drive capacity?
    If the HARD drive has only a small partition and unallocated space that is perhaps why only a small capacity is shown elsewhere.  You can format the HARD drive and
    create a new Partition or Partitions here.

    "b if I uninstall/remove device, then as soon as I tried to install the driver from the manufacturer it seemed to install ok, but... still bluetooth didn't work." It simply detects all devices everything I tried. »

    Have you tried the fix .NET? .NET can be damaged and should be
    updated in all cases.
    It's been awhile, so I don't remember why (safety improvement?) but I uninstalled .NET and reinstalled with. NET4.
    DOWNLOAD: Microsoft .NET Framework 4 (Web Installer) - Microsoft Download Center - Download details

    .

  • How to install drivers that I downloaded? They are in zip format.

    installing drivers

    can someone tell me how to install the drivers I HAV downloaded on my hard drive in the form of zipped files.  just says Windows help double click on them, but it just takes you further into the folder structure.  also I cud not download all the drivers on the manufacturers website so can u just install some or do u hav to install at the same time. (updated from xp to vista original problem since with ac lead plugged into the locks of mouse/screen goes bright and dim)

    Thank you very much

    To extract the .zip file simply right click on file and select "extract".

    Or download WinRAR http://www.rarlab.com/download.htm, install it and do a right-click on your file and select "extract here".

    And solve your original problem go to your production website and download the latest drivers from your PC (network card, graphics, sound, etc)

    Kind regards

  • Will someone please tell me how to install drivers for Portege M100

    I have installed the toshiba M100_XP_common files

    1. I can't load the graphics drivers because they say that I do not have some files

    2. I can't load the audio drivers because they say that I need MS bus drivers

    Help please, what to do?

    I am running xp sp3, I would more XP KB

    Hey Buddy

    I guess you got the Win XP drivers for Portege M100 on the European driver Toshiba page.
    You will also find the installation instructions that shows you the right installation order!

    Yes, you must install drivers in the correct order.
    In addition, you will find the Intel and Intel Chip Set Utility display driver. These are the drivers required in your message!

  • How to install drivers for computers connected to a network?

    Original title: install the printer driver for a network

    I am trying to download the drivers customized laptops, connected to a xerox business center.  My question is what I have to install them directly on laptops, or could I use a centralized machine and just let laptops are access pilots it or do I need to install drivers on each individual computer?

    The central machine is XP, laptops are all machines in W7.

    Hello

    The computer is connected to a domain network?

    You must install individual drivers for computers connected to the Xerox business center.

    If it's on a domain network, I suggest you to contact the TechNet Forums for any other help.

  • How to install drivers for "Dell adapter - USB 3.0-HDMI/VGA/Ethernet/USB 2.0"?

    I bought the Dell XPS 13, and I need an adapter to connect to Ethernet:

    Dell adapter - USB 2.0 3.0-HDMI/VGA/Ethernet/USB. -

    How to install this driver? -Will I install it on my "gold statue?

    I cannot join the domain because Windows Setup cannot find the required driver.

    Tried to install the driver as the latest installation command before the restart, but without success.

    No one knows how to fix?

    Hi Wooltown,

    ImageAssist does not support devices that are not included in the system.  If you want to integrate support for the driver, you can follow the instructions mentioned in the following post.

    http://en.community.Dell.com/TechCenter/enterprise-client/f/4916/t/19603435

    Thank you

    Tyler

  • How to install drivers for epson Stylus 520

    I tried several times to install drivers for the all-in-one on my desk. I use windows 7 64-bit OS. Whenever I try, a message indicates that there is no driver. Part of the download is installed but not all. Any suggestions?

    You try to download the driver on the site of Support of Epson for the workforce 520?  If not, the following link is to this site: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=152503&prodoid=63087903&infoType=Downloads&detected=yes&platform=OSF_W_7-64

  • How to install lightroom 5 after link has expired

    Hi, can someone please tell me how to install Lightroom 5, once my link has expired.

    Thank you very much

    Tracey

    You can also install the update directly, 5.7.1.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • How to install drivers for Mac under vmware?

    Hello the VMWare community! I would like to ask, if there is a way I can use my mac on Vmware drivers? My CPU is good in Vmware, but I would use my AMD Radeon rather than Vmware SVGA graphics. Is anyway to do this? I heard that you can use your Mac OS x disk to install the drivers in Vmware.

    You can not install the drivers for the host GPU in the guest operating system as the guest operating system does not directly see it.  So if the operating system does not see the device then install drivers for a device in the operating system can't see would be a waste of time and in some cases the drivers wouldn't install when even if it can detect the device!  So, we're stuck with the supplied VMware graphics adapter.  Now other things like the iSight camera that a different story and you can use the iSight Boot Camp driver in a Virtual Machine.

  • Qosmio G20 - how to install with a single drive HARD and without RAID?

    I would like to implement G20 Qosimo new with Windows XP 32.
    I bought a new hard drive and put it on the slot 1. I would like to run without any RAID (slot 2 is so empty)

    XP installation CD not found HD
    I went into the BIOS to see if the HD was there - HD is considered normal
    then I thought that I have to change RAID JBOD (page 3 of the BIOS), but it did not work
    I have confirmed with the button of 1234 - but nothing happened.

    In another task, they said to install the RAID-(pressant F6,... tout en commencer l'installation de XP) drivers
    I put the drivers on a USB - but the system will not detect it (and there is no floppy drive)

    I don't know how to install XP on this laptop.
    Any tips?

    Chris

    Can you get the external floppy drive (floppy drive) and load the RAID drivers using this disc which should be connected using the USB port?

    This floppy drive, you can buy on eBay for a few euros.

Maybe you are looking for