Satellite L300-19F: how to install drivers?

Similar Questions

• Satellite A200-1MD: how to install drivers XP

  Hello! I recently bought a Satellite A200-1MD. He had installed Vista. Switched to XP, but there's a little mixup with the drivers.

  Can someone please make me a list of necessary drivers and their installation order?

  Have known this Modem drivers must be installed before the sound card... The same situation with other devices.

  WLAN - Intel, touchpad - Alps.

  Thanks in advance.

  Hello

  First, it must choose the correct drivers for the series on the right laptop.
  As I remember the A200-1MD is a part of the series PSAE0E.
  You must choose that number of the form of downloading drivers!

  I chose this laptop series and selected XP drivers and... surprise, surprise :)
  . I found the installation instructions which shows necessary driver installation order!

  Please check this document and follow the guide line!

  Best regards

• Re: Satellite L300-147 how to install DDR2 667 2 GB memory card?

  I have the right part number to install memory for my Satellite phone but don't know how to do it. all the tips and tricks on how/where to open up the laptop and insert the memory card?

  Thank you!

  Chris

  Memory locations are generally accessible from the Base of the laptop.

  Find a door with a screw, remove the screw and lift the door. You should see two memory slots (with a free location according to the model).

  But you must make sure that your laptop can take 2 GB modules. I think that if you have a Celeron processor, the system cannot take more than 1 + 1 GB

• Satellite L300-19F - need Vista drivers

  I really need your help...

  I reinstalled windows Vista on my laptop Toshiba Satellite L300-19F and I do not have the necessary drivers... So I need your help...

  Can you PLEASE send me a link or send me all the necessary drivers, I need so that I can use my laptop without any problems (drivers of graphics, wireless, ethernet (NIC), touchpad, sound card drivers etc...)

  PLEASE HELP ME!
  I've looked everywhere and I can not find them...
  You are my last hope... ANSWER AS SOON AS POSSIBLE...

  THANKS IN ADVANCE!

  Hey Buddy

  I wonder if you really searched these Vista drivers. I doubt it.

  Satellite L300-19F seems to be a PSLB8E series and all THE Vista drivers are published on the European driver Toshiba page.
  Visit the European driver Toshiba page and choose this series.
  Then, you will get all the necessary drivers!

  Good bye

• How to disable the touchpad on Satellite L300-19F with Windows XP Home edition?

  Toshiba Satellite L300-19F, who was with windows Vista
  I installed windows XP and everything works fine.

  Since I'm on USB mouse to run I want to disable the Touchpad, but when I press Fn + disable key for touch pad it does not work.

  Need help.
  One can tell me what the problem is?

  Hello.

  To disable the mouse pad, you can go to control panel-> mouse control and disable the mouse pad, or you can use FN + F9.

  Kind regards.

• Satellite L300-19F and WXP - audio device does not work

  Hello

  I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

  BTW: he used to work on Vista.
  What should I do?
  And thank you

  -Download driver audio Realtek HD Realtek page.
  -Go to the Device Manager
  -Remove the sound card.
  -Remove the High definition Audio Controller
  -Restart the laptop.
  -Reinstall the Realtek HD audio driver

• Can satellite L300-19F - I change the Vista of French to English?

  Hi all

  I brought a new laptop Toshiba Satellite L300-19F
  I want to change the OS language french English full is possible

  If this is not the case, do I have to buy a new cd englsih for the same thing or can I get assistance from toshiba for the french to English

  Salim

  It is not possible to change the language on an already preinstalled OS. What you need is new DVD installations on the English language. You'll have to buy one. Toshiba has nothing to do with it.

  The software is delivered on the hardware and you have paid for a license only.

• Re: What drivers Vista choose for Satellite L300-19F

  Hello

  First, I'm sorry for the bad English because I'm french.
  My laptop is L300 - 19F with Vista.

  I reinstalled Windows Vista and I downloaded the drivers, but there is a problem:
  on the site, on the page to download the drivers, there are a lot of drivers for a component.

  For example, Firmware Update (2 versions) or Modem Driver (3 versions) or Modem region Select utility (2 versions) or Wireless Lan Driver (2 versions), there are many version and I don't know that I have to take.

  In addition, what are the necessary drivers for proper use?

  Thank you very much!

  Hello!

  Did you install the laptop with the Toshiba Recovery disk? The disk from Toshiba are all the drivers and tools.

  If you need the driver from the Web from Toshiba site, choose always the most recent.

  Good bye

• Satellite A505-S6922 - how to install Windows 7 drivers?

  I have an A505-S6992 and I try to do a clean install of Windows 7 Ultimate. I created the recovery with drivers and applications disc. In what order should I install and how to install Windows 7 ultimate?

  I tried to install by going just to the bottom of the list of applications/drivers, but has encountered an error.

  I think that the order of the facilities must be similar or even the same as on Vista.
  After the clean install of Win7 continue with:
  Chipset
  Robson driver
  Display driver
  Audio driver
  LAN
  Touch Pad Driver
  Card reader
  TOSHIBA software modem
  Wireless LAN driver
  Chicony camera software
  Bluetooth stack
  Port driver
  TOSHIBA Value Added Package
  TOSHIBA hardware configuration utility
  TOSHIBA supervisor password
  TOSHIBA Flash Cards Support utility
  TOSHIBA SD Memory utilities
  AuthenTec fingerprint utility
  TOSHBA face recognition
  TOSHIBA ConfigFree
  TOSHIBA WPS library
  TOSHIBA Assist
  TOSHIBA Speech System
  CD/DVD Drive Acoustic Silencer
  TOSHIBA TRS driver
  HDMI Control Manager
  Of course, it is order facilities Vista and maybe you won't find listed some stuff on the page to download, but at least you can see how it should be installed.
  Next week, I'll get my new Satellite A500 and I'll test the Win7 installation.

  Please let me know if you will be able to install it with success.

  Good luck!

• Satellite L300 - 03C - how downgrade from Vista to XP?

  I get blue screen after Installation finished.

  How do I get help please

  Hello

  What BSOD you get exactly?

  Satellite L300, you need SATA drivers to install Windows on a drive of Microsoft because it s equipped to a SATA HDD. The driver you need you can find in the Intel Storage Manager package on the Toshiba site.

  If you don t have an external floppy drive you can use nLIte to create your own with these drivers installation disk.
  [www.nliteos.com]

  In addition, I can recommend hundreds of discussions on this question here in the forum.

  Good bye

• Satellite L300-1BB - I need some drivers and I can use AHCI?

  I installed Win XP (Service Pack 3) and then downloaded the driver AHCI Toshiba Web site storage, but I can't install it because of the demands of the driver.

  File "Readme" for the driver package indicates that it works only with higher processors (e.g. dual-core).
  My Satellite L300 has Celeron M520.
  Can I use the AHCI mode in this case? If I use AHCI (SATA HDD) with Celeron which driver for XP I need?

  And I don't know what touchpad, modem and WiFi drivers I need to install.
  I don't know the exact specification of this model (which is exactly inside).

  Stand by. Let's since the beginning and clarify everything step by step.

  How you installed the Windows XP SP3 home edition? Have you installed using compatibility mode?

• Re: Satellite L300-1AP BSOD when installing Windows XP

  I have a new L300-1AP and would like to intall XP Pro but when I try it I get the stop message 0x0000007b.

  Made a new installation disc integrated with all updated sata drivers, I still get the message. I'm not sure about how I would install drivers of third party on the F6 function because it has not a diskette and cany to find how to do the same thing in a CD anywere.

  I appreciate that we should all try to use the vista OS that came with it, but it is a problem of compatibility with older software that I use.

  Can anyone help please?

  In the Microsoft Knowledge Base is an article about it:
  http://support.Microsoft.com/?scid=kb%3ben-us%3B324103&x=17&y=8

  I think that there is something wrong with the SATA drivers. My Satellite L300 works with XP without problems or BSOD when installing.

  The SATA drivers are in this package, and the Intel Storage Manager you can download on the Toshiba site.
  You can create your own installation with nLite (http://www.nliteos.com/) disc.
  If I have integrated the SATA drivers, you do not have to press F6. The HARD drive will be automatically recognized.

• Satellite L300-15V - how to restore BIOS & DMI?

  Hello!

  Please help restore the default settings of the BIOS and its content very.
  DMI is necessary to restore the data, and the value of SN, UUID and others, this utility is not found.
  Laptop: Toshiba Satellite L300-15V
  Model: PSLBCE-00L008RU

  Does not work:
  -The touchpad during installation of Windows XP (after installation and install the drivers everything works), used to work;
  -Adjust the volume using the wheel;
  -Some Fn keys.

  It would be ideal if someone sent the utility and / or a full dump of the BIOS (probably taken by the programmer).
  Thank you!
  Change the load through the service center to offer please don't be too cheap and unreasonable.

  Post edited by: ADMIN
  English language only.

  Hello

  I put t whether someone here will be able to help you with this, but who can help you with this if you n t even write what model of laptop you have.

  I guess you know that the BIOS is mobile specific and if you want to help volume you must put the exact model name and model number.

• Satellite L300 - 17K - how to create a recovery CD?

  Hello!

  Forgot to make a "restore CD" on the first departure to the top, is possible to do it later?

  I really want to reinstall Windows Vista on my Satellite L300 - 17K, and I don't have any system´s CD when I bought the laptop. I asked the retailer a CD system, but he said I should get a message to the first boot, saying I should do a "restore CD". But I remember well, that message never came to the top.

  So, how can I do now when I want to reinstall the system without having to purchase a new license?

  Thanks in advance!

  Sincearley!

  MANUELA

  Hey Buddy,

  What OS you have installed now? If the operating system preinstalled by Toshiba is still installed, you can create a Toshiba Recovery disk if you start the Toshiba recovery disc creator. This tool is preinstalled on your computer in the start menu > all programs > Toshiba.

  If you n t have no more the original OS, you can directly order a Toshiba Recovery disk:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite L300/BCI: How to get the Microsoft Office 2007, Google earth, etc.

  Today, I bought one of these laptops Satellite L300/BCI
  When I turned it on it took about 5 minutes, make an installation after a while I accidentally pressed ESC while piking he then restarted the computer
  as soon as switched on, it worked but it was missing:

  -Microsoft Office 2007
  -google earth
  -Google Toolbar
  -Google Desktop
  -Google Picasa

  Is their anyway for me to get these programs back?

  Any help would be appreciated!

  Hi mate

  Just a question; are you sure that this application must be installed on your laptop computer at 100%?
  It's really hard to imagine that you have removed or deleted from the disk only by pressing the ESC key

  But if these applications have been pre-installed, so you should be able to get back the system restore to factory settings.
  I mean by installing the image of Toshiba.

  It seems that it is an Australian model of laptop. Is this good?

  Well, I'm not quite sure how it works on Australian laptops, but I think the procedure should be explained in the manual of user m! Check it!

  But in a few discussions such procedure has been explained and some have said that you must press the 0 key immediately after switching on laptop.

  However, manual control of the user, then you would be 100% sure how it works!