How to install modem HUAWEI E220 HSDPA USB on Satellite L300-11 q?

Similar Questions

• How to install Windows 7 on my USB flash drive, just in case my computer crashes and I have to re - install?

  How to install windows 7 on my usb flash drive just incase my computer crashes and need to refurbish? can someone help me please?

  original title: help!

  Windows 7 does not support installation on external storage such as a USB Flash drive devices. You can back up your installation of Windows 7 on a hard drive external that you can restore in case your system becomes unstable. Please see the following for instructions on how to use the Image of the system:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  You have to an external hard drive.

• How to install Windows XP in the USB Flash drive?

  Greetings,

  I'm curious none knows how can I install Windows XP in a USB Flash drive?

  You do not, it is not a supported configuration.

• How to install drivers for "Dell adapter - USB 3.0-HDMI/VGA/Ethernet/USB 2.0"?

  I bought the Dell XPS 13, and I need an adapter to connect to Ethernet:

  Dell adapter - USB 2.0 3.0-HDMI/VGA/Ethernet/USB. -

  How to install this driver? -Will I install it on my "gold statue?

  I cannot join the domain because Windows Setup cannot find the required driver.

  Tried to install the driver as the latest installation command before the restart, but without success.

  No one knows how to fix?

  Hi Wooltown,

  ImageAssist does not support devices that are not included in the system.  If you want to integrate support for the driver, you can follow the instructions mentioned in the following post.

  http://en.community.Dell.com/TechCenter/enterprise-client/f/4916/t/19603435

  Thank you

  Tyler

• Re: How to install Windows Xp on pre-Vista laptop Satellite A300?

  Hello

  I am now faced with a problem when I try to install windows xp on my pre-operating system Windows Vista laptop...
  A300 when I entered windows xp disk and boot from the cd/dvd... There is an error telling me that: you have viruses on your hard drive or scanner virus, or something like that, but I test the same OS disc in another pc and his work I also Gdata IS 2012, and I think that his restriction from toshiba or I don't know , but it is very important to install windows xp...

  I hope help you how to install windows xp on my laptop.

  Concerning
  John

  Hello John

  It is not easy to understand the whole situation, especially the part with the virus.
  In my opinion, Windows XP Home edition installation should not be problematic.

  What you need is Windows XP Home SP2 or SP3 and driver SATA edition disc. Without SATA driver disk HARD will be not visible to Windows XP Home edition.

  More info on what you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38

• How to install Win 2000 form a USB CD on a protected 3440CT

  I have a 3440CT protected and are in need of repair/install Windows 2000 on a CD. I have the 4 game Win2k boot disk and can boot from USB FDD. The CD player is also a USB port that is connected via the port replicator, but he never saw also available.

  What I need to do to be able to see the CD drive for installation of windows?

  Any help much appreciated.

  Sam.

  Hello Sam

  I have never done this, but I assume that you need DOS driver for the external hard drive. You must start the unit by using the startup disk, install the correct driver, and after that, I think that you will be bale to use external player of ODD.

  Please check that a little this Portege category and you will find a lot, but really a lot of topics with the same theme and a lot of interesting observations and proposals how to proceed.

• Satellite A210-133: how to install Intel or via controller usb on windows 7

  Hello!

  I have a toshiba satellite a210-133 that I level to the 32-bit version of windows 7.
  All have been installed at the end, but I an intraoral machine that is connected by usb and it does not work properly.

  I questioned the manifacture of the machine and they said she wants an Intel controller or VIA USB to work properly.
  so I look at my computer\manage and I saw that
  I don't have this controller.

  Can you help me with this?

  Hi mate

  To be honest I m not very well what USB controller you mean exactly.
  The phone supports common USB 2.0 ports.
  Windows 7 provides own drivers USB of Microsoft, who controls this USB 2.0 ports.

  If the n t USB ports work correctly, then you should check if you need to install the chipset driver.
  Usually such driver chipset on the chipset manufacturer page.
  As far as I know the laptop uses the chipset AMD M690V (name of code RS690MC + SB600)
  So check that.

  In addition several devices needs a 3rd USB driver clean.
  I put t know if you intraoral machine needs these drivers, but I think that the manufacturer of this device must know this. So if you need this driver, please get in touch with the manufacturer of the intraoral machine to get this software.

• How to install windows 7 in dual boot on Satellite M840?

  Hello

  I've had this laptop M - 840 a week ago, pre-installed with windows 8. I can't replace the operating system with windows 7 as most of my Win 8 incompatible applications. I'm tired of clean install - does not work. I created a NTFS partition and tried to install win 7 on the new partition, but this isn't just beyond 'Windows startup screen. Any help in this regard will be highly appreciated.

  Kind regards
  C4I - OPS

  >. I'm tired of clean install - does not work

  To install Windows 7 on the laptop of Win8, you must change some settings in the BIOS.
  First of all, you have to disable startup secure in the BIOS.
  Second pass of the UEFI BIOS for the CSM and save the changes.

  Now you should be able to install Win 7

  But before doing this, I recommend that you create the recovery media (Flash disk to USB memory or recovery Toshiba

• How to install Win 7 on a SSD in Satellite U500?

  Hello

  I had good results with SSDS in my desktop PC (both Win XP) has decided to ride one in my laptop U500 who has Win 7/64. The original HARD drive still works very well so I saved an image on a big USB and burned a DVD of recovery.

  With the SSD installed and connected USB key, the image is on the USB drive. I get prompted to recreate the image and select 'Yes', then I get the message "the restore system image failed. No disk that can be used for the recovery of the system disk can be found. ». From here, it's downhill that, at the next prompt, the computer restarts.

  If I come back to the process and consult the list excluded disks, the SSD is shown here, but is not checked (thus not excluded).

  Only problem I could think of is the new SSD is 240 GB and the orginal HDD is 320GB but it is far from complete.

  Any ideas I can try?

  Stuart

  Stand by.
  You can install recovery using recovery DVDs image? I assume that you have created in the past.

  A few years ago I U500 and AFAIK it has optical disc drive that can be used for the installation of OS image or regular recovery. You have the Microsoft installation disc? When you start OS install has access to set-up for the SSD?

• How to configure the BIOS to boot USB on Satellite A50-110?

  Hello.
  I own a Toshiba Satellite A50-110 and I have a USB bootable Flash drive, but I don't know how to boot from the USB key.
  I guess I need to access and configure the BIOS. How can I do? Where can I get information on this subject? What are the steps to perform this task?

  TIA

  Hello

  As far as I know in the BIOS cannot be configured anything. As much as I now on this old notebook you can use just USB floppy for boot drive (U key at startup), but not the USB flash drive.

  Enter BIOS settings with the ESC key at first upward and check that all listed bootable devices.

• How to install Bluetooth on Windows 8 - S50 - A Satellite - 10 p drivers

  I bought a Toshiba Satellite S50 - A - 10 p, PSKJQE part number.

  I installed Windows 8 x 64 and everything works fine except for the Bluetooth adapter.
  I found that it is a combo of Atheros adapter, but I can't seem to make it work.

  Can you guide me please on the resolution of this problem?

  Thank you very much!

  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]

  If a new installation of Windows 8 was made, the Bluetooth is not present and does not work on your laptop. It is necessary to install two driver components manually to enable the Bluetooth feature.
  -Driver Toshiba system
  -If your laptop is equipped with a card Atheros or Realtek WLAN with Bluetooth, you must download the Atheros or Realtek Bluetooth driver filter
  -If your laptop is equipped with an INTEL WLAN with Bluetooth card, you need not download any driver filter

• How to install the driver for Intel HD on Satellite C660-22V

  Hello

  I couldn't answered below so here's my question.
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68240

  As * I don't know if you work for toshiba but what else am I supposed to do if the driver is installed on a new laptop does not allow me to use my software?

  The software is ArcGIS and would be widely used.

  Looks like it's been 2 years since the driver was updated by Toshiba so what is that?
  I expect the laptop to work out of the box, given that the specifications meet the system requirements for the software.

  Will there be an update in the future?

  Hello

  This seems to be a user to user forum so don't expect to get answers from Toshiba here

  > Looks like it's been 2 years since the driver was updated by Toshiba then what is that?
  > I would expect the laptop to work out of the box, given that the specifications meet the system requirements for the software.

  Where a problem? Satellite C660-22V supports Intel graphics cards.
  Visit the Intel page to get the latest graphics driver.

  If you would not be able to install this using the install.exe, go to the Device Manager and install/update the driver via Device Manager graphics card
  Use the option of advanced installation so that it points toward the driver's record that contains the latest driver files that s

• How to install the second hard drive in the Satellite A200-1 of body weight?

  I see my new Satellite A200-1 of body weight has two hard drive bays, the research in the second span, I don't see how a second drive can be mounted as the plug into the Jack seems to be missing.

  What parts do I have to mount to place a second drive that they are held in stock by out of the local computer and are quite cheap, can someone advise me on part numbers etc of the bits I need.
  Thank you
  Steve

  Hello

  I know that this empty place for second HARD drive is a bit confusing, but the same situation is with my A200-1CR. The fact is that some A200 models come with 2 hard drives and laptop case design this place must be prepared for this second HDD.

  But this does not mean that each A200 can be improved for the second HARD drive.

• How to make an update of the BIOS on Satellite L300-19F

  Hi, here and a Happy New Year.

  I want to help me, how can I update the BIOS of my laptop? any ideas? Thanks again

  Thanks in advance.
  PS: my laptop part number is pslb8e-01200CDU case is useful.

  Post edited by: mike80gr

  Hello!

  You can download the new versions of BIOS on the Toshiba site. Find your model and select BIOS update
  http://EU.computers.Toshiba-Europe.com

  Download the right file and follow these instructions:

  Extract the zip file containing the BIOS upgrade to a temporary folder.
  Ensure that all open files are saved and all applications are closed.
  Run the *.exe extracted to the temporary folder. Follow the instructions on the screen.
  The BIOS update will be done automatically.
  After a few minutes, the computer will restart automatically.

  Good bye

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?