How to install windows 7 in dual boot on Satellite M840?

Similar Questions

• How to install windows XP in dual boot os in my laptop HP G42-351TX preloaded with Win 7

  My laptop has the configuration as follows:

  Intel corei3 processor

  2 GB OF DDR3 RAM,

  320 GB SATA HARD DRIVE,

  ATI Mobility Radeon HD5430

  When I tried to install XP in reducing the volume and create the new disk, collapsed with BSD saying material changed, check the drive for errors and viruses with error code (I forgot) etc after installing some drivers. It will stop only when "starting windows" like status bar message. I need to install XP only incase if we cannot install the dual boot OS. Pls tell me the step by step procedure to do this.

  Sorry, but your new HP G42-351TX is not supported by the old operating system to Windows XP.  If you want to install Windows XP, yopu need via Windows XP Mode.

  Install and use Windows XP Mode in Windows 7

  Windows Anytime Upgrade: Windows 7 Home Premium to professional

  Carey Frisch

• How to remove Windows 7 from dual boot XP and Windows 7?

  I have orig. had XP installed 7 and then uninstalled 7 back to XP. Made a mess. Just try to return to the single operating system. What are your suggestions?

  * original title - two versions of Windows XP & Windows 7 *.

  Hello

  Click on the link below.

  http://www.mydigitallife.info/2009/01/17/how-to-uninstall-and-remove-Windows-7-or-Vista-leaving-Windows-XP-on-dual-boot-system/

• Re: How to install Windows Xp on pre-Vista laptop Satellite A300?

  Hello

  I am now faced with a problem when I try to install windows xp on my pre-operating system Windows Vista laptop...
  A300 when I entered windows xp disk and boot from the cd/dvd... There is an error telling me that: you have viruses on your hard drive or scanner virus, or something like that, but I test the same OS disc in another pc and his work I also Gdata IS 2012, and I think that his restriction from toshiba or I don't know , but it is very important to install windows xp...

  I hope help you how to install windows xp on my laptop.

  Concerning
  John

  Hello John

  It is not easy to understand the whole situation, especially the part with the virus.
  In my opinion, Windows XP Home edition installation should not be problematic.

  What you need is Windows XP Home SP2 or SP3 and driver SATA edition disc. Without SATA driver disk HARD will be not visible to Windows XP Home edition.

  More info on what you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38

• How to install windows 8.1 using boot camp on sierra os

  Im trying to install windows 8.1 64 bit on my end 2011 MacBook Pro using boot camp.

  I downloaded the ISO from Microsoft file and saved it in the downloads.

  i boot boot camp and she has 2 activated options are: software DOWNLOAD to apple support and the other is latest windows install or remove windows 10 or later.

  I'm not sure why it says windows 10 as it is not compatible with my mac earlier. anyway I check the two options and then bootcamp download all drivers and records them in my pendrive of 32GB.

  He then asks me what hard drive partition and I choose but then it says: he cannot find the installation file. I tried opening the file so it is mounted, but nothing works. I thought it's supposed to tell you what to do?

  Thanks for any help

  A Mac 2011 needs a physical DVD to install Windows and need to use the optical drive (CD/DVD). You cannot use an external CD/DVD drive.

  Please burn the ISO on a DVD-R SL and then click the installation option only.

• Install Windows 7 without Dual Boot

  Is there a way I can install Win 7 on a separate drive XP without entering the bootloader Win?

  I would choose which system to start using the start menu in the bios (F12 on my Dell 4700).  The underlying need is to remove the need for my spouse to have to deal with the boot loader menu.

  BIOS on this system has an option to change the boot order of drives.  I have not tried to use it, so I can't be sure it will work, but the result is that I could could move the new SSD to the top of the order.  If this has been done before the installation of Win 7, it would be enough to win 7 auto loading on the SSD without the boot loader?

  Or is it necessary to turn off the player XP is running from?

  You will need the Boot Manager.

  What you can do is the default operating system that you would like him to start when she wants to use the computer and set the timer for 4 or 5 seconds. Then he starts immediately to his OS of choice.

  Otherwise, I would buy him a laptop.

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select an earlier version of Windows

  Change the time for the list of OS to 4 or 5 seconds.

  Click OK

  Then apply and OK

• Windows 7 is not genuine, after the installation of windows 8 in dual boot.

  When I want to upgrade to windows 8, Windows 7, I think I should try windows 8.

  So, I installed windows 8 with dual boot.

  But after the successful Windows installation 8, when I started my laptop with windows 7 OS, it shows that the copy of windows is not genuine.

  What should I do?

  How can I get my windows 7 back as it was?

  Please help me... :'(

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste the results in your answer.

  As a starting point, the first thing you should check is the section to three figures on the number of product ID, if it corresponds or is included in one or two digits of the examples below, you have probably a MSDN or TechNet product key. "These keys must not be sold for retail use.

  065 066 067, 068, 069 to Ultimate, box 220 for professional and 230, 231, 232 area for Home Premium,

  There are probably others, but they should be close to those that are displayed"
  (How to be certain - download the Microsoft Genuine Advantage Diagnostic Tool listed above).

  Note: Though that illegally sold MSDN/TechNet allow product key for activation of more than one
  (usually 5 or 10), so these keys can be sold "several times" before activation may fail.

  J W Stuart: http://www.pagestart.com

• Adding an SSD as a boot drive - how to install Windows Vista Start

  To speed up my new e9105z, I bought a new 80 GB Intel X - 25 M to reduce disk latency and complete the 640GO HARD drive came with my computer.

  Drive has been installed successfully, recognized by the PC and formatted with the Windows Vista Disk Manager tool.  When I use the BIOS tool to set the Intel SSD as my boot drive, it says that some files of startup is missing, and I come to on the HARD disk as the startup disk.

  Bottom line: how to install Windows Vista on the SSD and configure it to start?  Did I lose my classic HDD data in the process?

  Thank you

  millergd

  millergd wrote:

  Here is where I am/measures taken.  HP of course makes this difficult process:

  (1) used the CD Creator to make a backup.  (Note that the CD - R does not work with the e9105z software.  Do only DVD-R).  (I tried the system HARD disk recovery image.  He simply reinstalled itself on the HARD disk.)

  (2) the value of Vista installed on the SSD via backup DVDs.  System starts beautifully with SSD.  Hooray! I was about to declare mission accomplished, then...

  (3) Reconnected my HDD SATA cable, she failed to be the startup disk.

  (4) I used disk management to reformat the HARD drive to erase its boot sector.  It is always default to the HARD disk, which is more a Vista on it.  Now, I must go into the BIOS and choose the Intel SSD as boot drive whenever I turn on manually.

  Any idea on what needs to be done to configure the BIOS to finally settle the SSD as my boot drive?  The backup system image is still on the old hard drive.  Could that be throwing?

  The SSD speed is great, but the 6 + hours spent on Vista reinstall, reinstall and reinstall throughout this trial and error process made a royal PITA to do.  It seems that HP didn't consider that whether by adding a second drive that is bootable.

  Thank you

  millergd

  You should be able to select the startup disk in the BIOS.  Restoring image shouldn't be a factor.  If the BIOS settings do not work, I would swap the connectors between the readers.

  Good luck

• Removal of partition of Windows 7 from Dual Boot Windows 7/8

  I recently installed Windows 8 on PC from a parent, because it's the upgrade $ 14.99, uncertain about whether my parents would be as W8, I decided to double it start alongside W7.  However, my parent loved W8 and he now uses as its main operating system.  My problem is, how safely get rid of the partition of Windows 7? Try to remove it cause the laptop to be unable to boot because it seems that the boot files are still on the W7 partition.  Is there a way to make the W8 the 'boot' partition, perhaps by creating / copying the boot somehow files?

  Solved, here is how I fixed it in case someone else runs into a similar issue:

  1 installed and run EasyBCD on Windows 8

  2 open the BCD Backup/repair and C: set as default boot drive

  3 used Minitool Partition to delete the partition in which Windows 7 has been installed and extend Win 8 partition on unallocated space

  4 restarted, Dual Boot screen appeared, though there is only a single OS installed, so re-opened EasyBCD on Windows 8 and remove the entry from Windows 7 in Dual Boot menu

  Note that this is a VERY good idea to keep a Windows 8 installation disc/USB on hand at any time during this procedure, in case something goes wrong.

• How to install Windows 10 on mac not supported

  Hi all

  I have a MacBook Pro 15 inch 2011 lag and I try to install Windows 10. I've tried 3 different methods. I can provide more information if necessary.

  I had running Windows for 10 minutes (2 reboots) until he got stuck on the screen to start due to an unknown error (probably error compatibility)

  I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

  If any of you guys have any suggestions please tell me this is greatly appreciated!

  I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

  I don't think that you can install Windows 7 with Boot Camp on El Capitan:

  • A Microsoft Windows installation media or disc image (ISO) containing a 64-bit version of Microsoft Windows 8 or later *.

  From: How to install Windows using Boot Camp - Apple Support.

  Windows 10 is simply too new for your Mac, and Windows 7 is too old. It is quite a difficult situation. If you really need Windows, you would need to get a copy of Windows 8, or put to level to an earlier version of Mac OS X with a version of Boot Camp that works in Windows 7.

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?

• NB100 - how to install Windows 7 without CD player

  Hello. I was wondering if anyone knows how to install Windows 7 Pentecost on a CD player.

  I have an external HARD drive.
  Is - this posibel to make an image on this one to boot from?

  Hmm, I think that's not possible.
  I know that it was possible to install Win XP without the disc.
  You simply copied the folder integer i386 to the HARD disk and executed to the Winnt. EXE

  I have no experience with Win 7 but I also didn t find details that something like that would not be possible so I guess that's not possible

• How to install windows 8 in freedos?

  Hey, I bought a HP 15 g009ax of flipkart with FREE DOS as the operating system, I do not know how to use freedos and install windows 8. Its just sitting there without being used. How to install windows? Please advice or help the guy?

  I have a copy of win8 on USB, when I try to boot from USB, It tradingtextile.com displays a message like: "error in the operating system.

• How to install windows 7 in windows pre-installed 8 hp Clubhouse 15-B001EE

  How to install windows 7 in windows pre-installed 8 hp Clubhouse 15-B001EE

  She asked first on a pilot

  So I removed the harddesk and installed windows 8 on the other PC. When I returned the harddest computer and just when to start loading windows it gives me a blue screen

  Don't know what to do because I removed the recovery partation

  Hello:

  See if it works for you...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully, W7 should install.

• How to install windows 7 on vista 64-bit with USB key or usb hard drive

  I use windows vista 64 bit on HP Pavilion dv9925nr. HL-DT-ST DVDRAM GSA-T40L ATA Devicedisappeared 'my computer' and 'Device Manager' list a few days ago. There is no upper and lower filter. Device is that in the "boot order" Start menu device sometimes comes for everything and disappears again. ROM has the power. Opening of the shutter. Device works beacause I copied a cd when it was clear. I think that this problem is related to the software. When the device appeared I also uninstalled from Device Manager and looked for a device change so she is back, but after some time again say aapeared. I want to try once by complete control of formatting and install the new copy of windows 7 and let see if the appliance becomes stable. I can't install with cd rom then how to install using a drive hard usb (WD 200 GB).
  Please suggest.

  Remember that HP does not list Windows 7 device drivers, that's why your computer is not compatible Windows 7.  HP Driver support: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3740568&lc=en&cc=us&dlc=en&lang=en&cc=us

  ==================================================================

  Windows 7 USB/DVD download tool:
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key:
  1) http://www.maximumpc.com/article/howtos/how_to_install_windows_7_beta_a_usb_key:
  ( http://www.windowsvalley.com/blog/install-windows-vista-and-windows-7-using-bootable-usb-storage-device/ 2)
  ( http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/ 3)
  4) http://technet.microsoft.com/en-us/magazine/dd535816.aspx

  How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box:
  http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

  Also: A quick way to get your Windows 7 into a bootable DVD:
  (This guide is for people using the upgraded version of the students, composed of)
  Setup1.box, Setup2.box and Win7-P-Retail-en-us-x64)
  http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

  How to install Windows 7 from a USB stick without DVD ISO of Windows 7:
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  Use a USB key to install Windows 7 - even on a Netbook:
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  Cannot install Windows 7 error USB "Setup could not create a new partition system:
  http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

  J W Stuart: http://www.pagestart.com