HP Envy 4502: HP Envy 4502 - do not print all colors

Similar Questions

• Kodak esp 5250 does not print all colors

  I have a kodak esp 5250 all in one printer I put new cartridges in however and not print all colors.  I tried aligning the printhead and clean.  What else is the problem?

  I tried to print a test page and some colors are missing.  In addition, it lacks striations.   Yes, the band was remove new cartridges.

  Well, - if you printed the demonstration outside of Windows (directly from the printer) page and there is lack of colors - this is not a software problem - but a material one.  Contact Kodak or try different cartridges.

• HP Envy 4500 does not print all pages

  I just bought a HP Envy 4500 e-all-in-one printer and tried to print photos from my MacBook Pro (Mountain Lion OS X 10.9 (13 A 603)). For some reason any, that it will print the first photograph, then my Mac says it's printing the rest, but they do not print.

  Can I do to recitfy this? I have it installed correctly?

  Very confused.

  Hi jeandiarra1956,

  Thanks for the very quick response.

  I was talking with some of my colleagues and we would like you to try the following steps.  Once you have completed the steps please try again to print from iPhoto.

  (1) Please reset your printing system, I have included a document on how to do it. Please be aware that this reset deletes all print settings and pending print jobs from your Mac.

  (2) in the "printers and scanners' click on the '+' and select 'Add another printer or scanner' options

  

  (3) select your desire 4500 and at the bottom where it says "USE:" Please change to the Envy of HP Photosmart series.

  

• HP Envy 4520: Will not print in color

  I put upupmy printer and it scans and black prints correctly.

  I undertook the alignmnet and the cleaning cartridge, print tests of this have color but when I try to print color documents or photos they come out only with the black cartridge.  I have

  The Black & White check box, always only black white printed, disabled

  The cartridges are new and indicator bed almost complete, but as I said above they print the pages of ok color test

  Now, I have just installed a new cartridge color and re stillwill not aligned setting print photos or documents in color

  I'm going crazy

  What next please?

  Hello @MrT1, hope you are well!

  Thanks for joining the HP support forums. I'll be happy to help you

  Have you tried to make a color copy from your printer? Place a color document face down on the scanner bed and touch the copy option on the printer screen color.

  If the color copy comes out well, then the printer hardware is good and the issue would be with the print settings or drivers. Try the following steps to troubleshoot the same:

  • Click on the Apple menu icon and then click 'System Preferences '.
  • Click on "Printers and Scanner" / "print and scan" or "print and fax".
  • Right click on the empty space in the printer list and then click "reset printing system".
  • In the confirmation window, click "Reset".
  • Enter an administrator user name and password and then click on 'OK '.
  • Wait the printing system goes to zero and no show of devices in the list of printers
  • Click on the button "Add" (+).
  • Search for, and then select the name of your printer in the printer list and then click 'Add' to add your printer.
  • Click on "print using the...» "and then select the name of your printer (default"Airprint"would be selected)
  • Now, try to print and check. In addition, check the settings to print here: http://hp.care/2eiIZhE

  If the copy of color also comes out without color, then it might be a problem with the printer hardware. Try to solve the problem the steps detailed here: http://hp.care/2e5FwH5

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Envy 120 do not print

  My printer HP Envy 120 is not printed correctly.

  The printer accepts the job, pages come out of the printer, but the only thing that appears on the page's hyperlinks. I tried printing from three different computers and printed various documents Microsoft word but its all the same impression.

  Is there something you would suggest that I should try?

  Thank you

  I would try the doctor print and scan to see if it will detect and fix the problem automatically

  Try printing HP and Scan Doctor for Windows

• DesignJet T770: DesignJet T770 will not print in color

  After you move a DesignJet T770 44 inch queue from a Windows 2003 server to a Server Windows 2012 R2 the T770 will not print in color.

  The general tab on the properties T770 printer States ' color: No. '.  Yet once on the printer properties on the tab color color management is set to "Automatic (recommended)".

  The T770 printer driver has been downloaded from Windows Update I was unable to get a T770 driver from the HP website.

  The T770 product no is CH539A / CN375A. Strangely, none of these product numbers have been recognized by the search for product number for th HP Web site.

  My question is how do the T770 to print color again?

  Any help would be appreciated.

  I would say that you definitely have a driver problem if you has not changed the settings in the built-in web server printer at the time wherever you spent since Windows Server to the other server in Windows.
  
  I check all the settings on each tab in the driver to see if it is possible that somewhere in there color is disabled.
  
  I also go back to HP.com and look for driver for that machine again.
  
  I am also looking for a print utility for this machine, which should not be confused with a printer utility, even if they might be named roughly the same.
  
  I recall there are two utilities is to monitor the status of your printer, and the other is to print and work around the driver.
  
  When you have found the right print utility you save your print format JPEG or PDF file and then open it in the print utility and send it to the printer without ever open drivers.
  
  Another experiment, you can try it if you have a practical PDF just open a web browser and access the built-in web server printer and then try to print the PDF file directly by using the option for printing on the web server.
  
  The purpose of some of these things is number one determine if the printer has developed a problem that it prevents printing color and print JPEG or PDF from the built-in Web server where all you do is send the file directly to the printer would let you know that the printer is always able to color.
  
  So if you can get the print work utility where you can open the PDF on a PC and then send it to the printer you have to least a workaround while you solve the driver problem.
  
  If my post solves your problem, please click on the accepted solution button under the post. Thank a technician for their efforts in the creation of these posts please to give them a little nudge upwards, just click this icon under the post and give them a few congratulations.

• Officejet 6310 does not print in color but Mac prints a color scan

  Officejet 6310 does not print in color but Mac prints a color scan

  Awesome!

  Thank you very much.

• Officeject Pro 8600 Plus: Officejet Pro 8600 will copy in color but not print in color

  I have an Officejet Pro 8600 Plus able to make copies of color, but it will not print in color of my office.  My printer uses the version of the firmware CLP1CN1416AR.  When I go to print a document in color, I go to the properties of the printer and then advanced and set print in grayscale on Off, but I get still only prints in grayscale.

  Thanks for your suggestions Zac.

  1. we have tried using several different programs (paint, Microsoft Word, Adobe Acrobat, a test of the printer properties page, etc.), but all printed only in grayscale.

  2. it's connected via Ethernet cable to our Wi - Fi wireless router and then to our laptop.

  3. the ink levels are all above 40%.

  I had already tried electric bike on the printer several times as well as the computer, which did not help.  I tried to change the printer settings default to print in gray and then changed them back to the color, but that did not help either.  I tried resetting the printer, mentioned in another thread (unplug the power cord at the back of the printer, while he was conducting, then unplug the power transformer in the decision-making, hold button power printer for 60 seconds, then reconnect the), but which did not help either.  Finally, I uninstalled the Windows printer and reinstalled a couple of times, and finally, it started working properly again, so, apparently, there was a problem with the driver who eventually got cleared up by reinstalling the printer/software/drivers.

  Josh

• HP 4650: Why is my HP 4650 not print in color

  My HP 4650 inkjet is connected according to the instructions, but would not print in color. I try to print a shhhet of propagation in color. I got was black printing ink.

  Hello, @koolDUDE - greetings!

  Welcome to the HP Forums, I'd love to help you with your Officejet printer problems.

  Try to make a copy on your printer. Place a document face down on the scanner glass, and then press the color copy option to make a color copy. If the copy works fine, so that the issue might be with the printer drivers. Try the following steps:

  • If present, disconnect the USB cable between the printer and the computer.
  • Go to control panel of configuration-programs and feature - select all of the HP Officejet printer entries and uninstall them.
  • Restart your computer.
  • Now, click http://ftp.hp.com/pub/softlib/software13/COL61232/mp-147818-1/OJ4650_Basicx64_72.exe and install the printer drivers.
  • If you are prompted, connect the USB cable.

  Please let me know if it works for you. Thank you!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Color Laserjet 3550 Printer not print true colors

  I have a hp g72 laptop I received last year. It's a little.  I have a printer hp color laserjet 3550 which is about 5 or 6 years.  I think that I have just updated the drivers to accept 64 bit (not sure). However. My impression went crazy.  It does not print true colors.  I have three new cartridges and waiting for the fourth one to tell me it needs to be charged.  I don't know how to calibrate, but I can't seem to find a way to make the colors print correctly.  Thank you.

  Hello AnnetteShort,

  I suggest you get the latest drivers for your HP Laserjet 3550 from the following HP location:
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=411173&TaskID=135&prodTypeId=18972&prodSeriesId=411171&lang=en&cc=us

  Be sure to enter the proper operating system and whether 32-bit or 64 - bit.
  You don't specify your operating system so I can't take you to the correct driver.

  There is not a driver listed for Windows 7, so if you have Windows 7 then download driver Windows Vista and right click to install in compatibility mode.

  If this does not help, I suggest you post in the forums of HP support for your Laserjet Printer.
  Click on the link below:
  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

  I hope this helps.

  Marilyn

• WANT TO 4500 DOES NOT PRINT ALL OF THE GRID

  WANT TO 4500 ALL IN ONE PRNTER DOES NOT PRINT ALL OF THE GRID

  My problem seems to have resolved itself.

  Thanks for responding.

• HP C5280 All in one printer does not print all of the beginning of the page or end of page

  HP C5280 All in one

  Does not print all of the beginning of the page or end of page

  Hi david skelton.

  I would like that you start by checking that you have the latest drivers for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3204464&

  I hope this helps!

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• Color Laserjet CP1518 will not print in color

  XP SP3 usb connected.

  I found other troubleshooting solutions. Namely, that where the solution is to uncheck "print in grayscale".  I don't see this option on one of the property tabs.

  The 1518 has been in service for months, maybe more than a year.  Had some problems with it not behave like a printer and would remove and reinstall through control-> printers/Fax Panel.

  Tried again with this instance, nothing helps.   Color toner supplies are all over 80% - and print supply page in the menu of the printer _does_ color print.  Fact page of toners 'Colorsphere.

  Any jobs sent to the printer, with elements of color, prints in grayscale.  The printer is shared through the connected usb XP machine.  network printing also does not print in color

  A search of this forum did not turn anything for this situation.  If anyone can provide a link to the query (solved) of another user or perhaps an explanation for changing the appropriate printer property to start printing in color once again I certainly appreciate it.

  Thank you.

  A solution of sorts.  I'll post here so when it happens again in a year and my addled brain can't remember, maybe that I'll find myself here.

  At HP, I downloaded the printer driver.  These are apparently "universal."  Deleted the XP printer and it - he added point to the level of the 8-12 different folder with .inf files that I had just downloaded.  No idea which one to use.  And apparently not so universal that HP would have you believe.  I presume that one I chose (proabably the first alphabetically) only allows gray - or is gray universal for printers.

  Well, rather than waiting on the long tail of wisdom on this forum I tried a reset hot of the printer (pull the plug while its on and wait 15 seconds).

  did.  tried to print (in excel the view print used to always display in color and he wasn't yet). There not also to print in color.  However in the meantime that the print job, I noticed that my "equipment was ready for use.

  Checked the printer and found a new listed HP cp1518ni.  has chosen to print in excel and the preview showed in color and voila! print color too.

  I've never cared for lack of HP of discrimination re: printer drivers 'universal '.  At least, they should give more guidance on which .inf to use _if_, you're going to be looking forward and install it yourself.

  However, I am impressed XP and HP got the correct auto-install.

• Printer does not print in color

  I have a HP Officejet 6500 has more all in one wireless printer which stopped printing in color.  I changed all three colour cartridges and have uninstalled/reinstalled the printer.  Grayscale is off, but the printer still does not print in color.  Does anyone have an idea of what I can try?

  It is possible, Yes. However, I would recommend calling support since the printer is only 6 months (and should be under warranty).