How to install the Dell AIO 946 drivers in compatibility mode?

Similar Questions

• Satellite L - How to install the latest Intel graphics drivers?

  Tired of waiting for Toshiba releasing the latest Intel graphics drivers (have problem with Aero if want to install the latest drivers). Intel Installer recognizes that it is a Toshiba and bombs out telling me that I have to get the drivers of Toshiba.

  Guess it is to check a reg framework or also - anyone know how to make this work?

  Hey Buddy,

  Before discussing these things there, you should put your model correct portable operating system.
  In addition, you must send a description of the exact error on the problem or error message.

  But of course you can install the drivers to display Intel directly, that's no problem. It will work.
  I also installed new drivers Intel several times and don t have problems.

• Satellite A500-19N - how to install the original Nvidia display drivers?

  Hello

  I use a satellite A500-19n.
  Is it possible to install the original drivers (nvidia - mobile) on my laptop?
  When I try to install them I have always an error message "no driver found for your hardware"...
  There's a Geforce GT 230 M in my computer, so I wonder why this happens...

  I want to install the original drivers because they are generally better than the standartdrivers...
  Thanks ;)

  Hello

  I advise you to try to install the Nvidia drivers, you must use the pre-tested driver Toshiba as it has heat protection. But anyway if you want to install it, step this link

  http://www.laptopvideo2go.com/drivers/Win7x64/195.62/Disclaimer

  You will use you own risk.

  Welcome them

• How can I get a driver for a Dell AIO 946 Printer?

  Original title: pilot

  The Dell AIO 946 Printer is not a driver. How can I get a driver for this printer?

  From Dell.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=PRN_ALL_A946&OS=WLH&OSL=en&CATID=&impid=

• How to install Dell AIO 946 in Windows 8

  I have a Dell AIO 946 printer I am trying to install on Windows 8.  The driver is on my hard drive.  I don't know how or if I can continue from there.

  Hi Patsy,

  Do you use the 64-bit or 32-bit operating system?

  You can follow the suggestions mentioned below and check.

  Method 1: double-click on the Setup file and install the drivers.
  During installation it will ask you to connect to the printer, and then connect the printer, follow the instructions on the screen.

  Method 2: if the above fails, install the drivers in compatibility mode. Currently Windows 8 pilots are not available for your model.

  Dell all-in - One Printer 946, v.G9a A01
  

  http://www.Dell.com/support/drivers/us/en/04/driverdetails?DriverID=R145315

  Check out this link to install the drivers in compatibility mode:

  Make programs more compatible with this version of Windows.
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  
  

  You can also consult the following link:
  

  How to download and install drivers for Dell 946 all-in-one printer

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/kcsarticles/ArticleView?docid=266170

  Hope the above information is helpful.

• How to install the graphics card Nvidia Quadro 4000 in Dell R710

  Hi all

  I read a lot about the installation of the Nvidia Quadro PCIe x 16 card in a Dell R710.  I know what parts I need to order (Dell GP347 PCI-e left Riser), but I don't know how to install the power cable 6 pin required by the Nvidia card.  Where would connect it to the motherboard Dell R710?  Is there a place to connect?  If not, is there some type of power provides I can hang the 6-pin power Cable from Nvidia and power the server?  Any help would be appreciated.

  It's a bit old now, but thought I would answer that I had this work and very happy with the performance!

  In addition to editing card, that I needed, there is NO way to provide the power that the card must provide without a power SUPPLY.  There is a really small box listed on Newegg called "ePOWER EP - 450CD 450W ATX12V/EPS12V modular juice dedicated to the area of graphics card and CPU of power".  Buy and run the GPU power cable to an empty PCI slot at the back of the Dell server.

  I also bought some video cards NVidia Quadro 4000 2 GB GDDR5 PCIe for each of my 5.5 ESXi servers. Also, I left my active integrated video graphics card and it is always primary for my hypervisor.

  Download and install the NVidia ESXi drivers on their site and follow the directions to install.  Reset.

  I use sVGA with my Horizon offices and downloaded a trial version of Sketch-Up to test the 3D.  They have a community of users who post 3D renderings and you can download it directly from the Sketch-up program.  Cruise around and check the performance.

  As a side note, I noticed IE worked worse way by using the GPU when browsing the internet.  Go to settings, advanced in Internet Explorer and has the option at the top of the page "use rendering software instead of GPU".  This change makes IE works as expected.

• How to install the patch for the security hole last QT process running on a Dell with Windows 7 (Windows 10 upgrade) laptop? I got a message from my program called Belarc that the patch is missing on this device. Thank you

  How to install the patch for QuickTime Pro for Windows 7 on a Dell laptop... I got an alert through a program which I run from time to time (Belarc) and it says that there was a security breach detected by Apple (or one of its vendors, who manages the security of the operating system such as Cisco) during December 2015.

  Please notify.  Thanks in advance for your guidance pertaining to my question.

  Download QuickTime for Windows - Apple 7.7.9

  Apple ends development of QuickTime Player 7 for Mac and Windows operating system, so don't expect much more beyond this last version.

  The installation shows are supported for Windows 7 and lower, so I don't know what to expect on Windows 10.

• How to install the second hard drive in the Dell XPS 8900

  My new Dell XPS 8900 only has a single HH and I would install a second HH.  Probably 3.5 SATA internal a 2 T.  I need a repair of XPS 8900 so that I know how to install the second disk.  I just need a few simple instructions so that I know how attached a data cable SATA and do the go by car.  Direction will be appreciated.

  You will need the drive AND a data cable.  The manual is here:

  www.Dell.com/.../manuals

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&l=en&s=Gen&DN=TT1092882

• HOW TO INSTALL A DELL PRINTER

  HOW TO INSTALL A DELL PRINTER MACHINE 4443-1DW MODEL V313W

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Satellite L10-209 - how to install the display driver for Windows 7?

  I formatted my * Satellite L10-209 * and * Windows 7 *. All the drivers installed fine but the * video card *: xD

  How to install the display driver (graphics card)?
  Tools & Utilities CD does not work with Win7,

  Hello

  I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)

  Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
  http://www.Intel.com

  Check this box!

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• How to install the theme for Windows XP Professional

  How to install the theme for Windows XP Professional?

  Hi Shubham,

  The Microsoft Download Center a lot of themes, or you can use your favorite search engine to search the Web for more themes of third-party websites.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can consult the following articles:

  Make Windows XP as you wish

  Resources to configure desktop themes in Windows XP

  Create your own desktop theme

• How to: install the driver for scanner "visioneer onetouch 8920 usb" diskless

  Original title: is there a way to get a "driver" for my scanner "visioneer onetouch 8920 usb", other than the dish that comes with it? (I have no disc drive for my netbook)

  I recently got a netbook, the Acer aspireone running windows 7 starter edition, I have a scanner, visioneer onetouch 8920 usb. the netbook I have has no disk drive, I plug the scanner and windows cannot load the driver.  I need help to find how to install the driver, so I can use this scanner.

  Driver download page (but the latest drivers for XP - they will probably not work):
  http://support.Visioneer.com/products/8900/downloads.asp

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in windows 7.

  More information on how to make older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows