How to install the raid without floppy drive drivers

Similar Questions

• Qosmio G30: How to add the driver RAID without floppy drive?

  I'll put win xp tomorrow, as far as I can remember I will be asked to insert a floppy with additional RAID/SCSI drivers - I guess I need some drivers for XP see my RAID stripe.

  I was able to download 'raid-drv-qog20-xp - 1380.zip', but I'm afraid to look if my laptop has a floppy drive... How can I add the driver did not have a floppy drive?

  Hello

  Maybe a stupid comment, but if you can buy Qosmio G30 I presume that you can also get a used floppy disk. I did this a few times with Vista and Qosmio G30 and it works well.

  Check eBay. You will get the drive used for a few euros. Otherway tries to create CDs and if the RAID drive must travel to ODD, I didn't try because I have a FDD, but you can test it on your Qosmio.

• Equium L350 - 10L - how to install the latest Intel graphics driver

  Hello

  I noticed that my graphics drivers (display) are 2007.
  The Intel GMAX3100/GM965 site is 2008 drivers but it won't let me install these, it does not say for this production.

  Toshiba drivers are drivers of 2007 and I NEED the drivers of 2008.
  Toshiba ringtone I tried, but their systems have a "major update of the system" and they are not available today.

  I m frustrated :(looping

  Please help me! I need the latest drivers GMAX3100/GM965!

  Thank you
  Jonty.

  Hello

  You can install the graphics driver for the Intel page using an advanced installation.

  -First of all, you will need to access the Device Manager.
  -Select the graphics card and choose Update driver.
  -Then select Install from a list or specific location (Advanced)
  -Don t find. I will choose the driver to install.
  -Point the downloaded driver

  This should help you to install the Intel driver. But note; not all Toshiba drivers can be installed only at your own risk!

• How to install the creative cloud to drive non-system?

  My system disk is full and I need to install creative cloud or at least some of the Adobe applications on the other disk. The problem is when you install the creative cloud or other aplications he never asks where to install them.

  Adobe Creative cloud app will be installed by default in the c: drive, we cannot change.

  However, you can change the installation location for other applications such as Photoshop, Illustrator... CC etc.

  

  Download and install Adobe Creative Cloud apps

• How to install the Synaptics pointing device driver

  Hello

  I accidentally uninstalled my Synaptics pointing device driver. So now I can't use my touchpad like before. It won't scroll now for example. Could someone help me even download and get my touch pad will work as before.

  I have a hp laptop Pavilion that is running a 64-bit windows 8.1and operating system.

  Thanks in advance!

  Kind regards

  Sandrine

  Go here: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=3995705&h_page=hpcom&h_client=S-A-R163-1&cc=us&lang=en

  Select your product > select your model > Option 2: go directly to the result software and driver > driver-keyboard, mouse and input devices > Synaptics TouchPad Driver

  You should be able to download and reinstall the driver.

• Equium P300-19O - how to install the latest Intel graphics driver

  same problem as this guy (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=36626&tstart=0)

  never tried to display drivers from intel and other computers laptops, but none will install via the main executable file or Device Manager.

  If anyone knows of a driver more recent works then a link would be useful.

  Thank you

  The guy in the other thread (link in your message) solved this problem and managed to reinstall the Intel driver from the Intel page.
  If you do something wrong

• How to install the 'real' Microsoft Bluetooth Driver for Windows 7

  I'm a developer.  My system uses Bluetooth and is designed to use socket connections.  It works very well with the 'real' driver for Microsoft.  I distribute a USB radio that works with the real Microsoft drivers (work and tested on Windows 7 with the Microsoft drivers installed) I continue to turn in computers with OEM (non-Microsoft drivers) taking control of all Bluetooth devices.  In XP and Vista I could usually update the driver and choose the right pair.  I find computers on which Microsoft drivers seem to be missing and so I can't select them in Windows 7.  It may also be that Windows 7 is not allowing me to choose (tells them best driver already installed).  Is somewhere to download and a way to install native drivers Microsoft Bluetooth of Windows 7 on an OEM modified system that does not include these drivers?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public to Microsoft on MSDN Developer Network. Please ask your question in the forum of the development of Microsoft network .

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Install the software without optical drive

  I just bought a new Mac Book and I want to uninstall my CS4 on my old laptop and download on my new laptop. A problem, no optical drive. Y at - it somewhere online, I can enter my licens information and download it directly to my computer?

  Use this method:

  Direct download links for Adobe software

  Follow the isntructions exactly...

  Mylenium

• Configure the ASM without ORACLEASM drives

  
  Guys,

  I found that right for your perticular kernel asmlib is a PAIN. (I also came to know Oracle dsnt predict asmlib rhel 6)

  Finally, we can find those, but can any 1 share knowledge how to configure the asm without Asmlib drives?

  I mean I dnt want to use/usr/sbin/oracleasm createdisk/dev/sdb5 (like this)

  Now if you ask me what operating system, my OS is RHEL 6.3, but I would like to know for all versions of configuration asmlib.

  DB: 11.2.0

  Which records exactly? Local? NAS? SAN? Single path of I/O? Multiple I/O paths?

  The Linux kernel will automatically enumerate all devices h/w - and udev to create entries of device for these devices. Then all devices scsi for devices SAN/NAS/local lands in tree in/dev automatically.

  However, the device names are not static (not even local devices as a new drive added to the server may have an impact of the names of existing devices). So in general, the names of devices directly deprecated. Same fstab/etc/fstab of the kernel utilisΘ string of identifier.

  If you have multiple path i/o devices, the multipath driver should be used.

  If you have devices path of single e/s (e.g. NAS/iscsi), then you can do the following.

  1. Identify devices using lsscsi
  2. Use fdisk to create one (for example partition 4) partition on the disk, and then assign him da (Non-FSdata) partition type. This allows you to identify via the number of partition storage devices (i.e. all 4 partition are storage). The partition type is a safeguard against accidental to mount the partition as a file system.
  3. Create a udev rule to call for partition devices 4:
     file #: /etc/udev/rules.d/99-oracle-asmdevices.rules
     KERNEL == "sd * 4", BUS == "scsi"PROGRAM="/etc/udev/scripts/localdev.sh %b", SYMBOLIC link += "asm / $result", OWNER = "grid", GROUP = "oinstall", MODE = "0660" "
  4. Create a udev script that will create a special link to device ASM to ASM to use, for example

  #!/bin/sh
  # file:         /etc/udev/scripts/localdev.sh
  # descr:        outputs logical device name for a local asm scsi target
  
  TAG="[scsi]"
  BUS=${1}
  DRIVE=`echo "$BUS" |  sed 's/://g'`
  
  targetname=disk-${DRIVE}
  
  logger -t $TAG -- "/etc/udev/scripts/localdev.sh bus=$* target=$targetname"
  
  echo "${targetname}"
  #eof
  

  So when a partition device 4 is detected, a device entry is created for in/dev/asm. I used a very simplistic device (drive-busid) naming scheme. You can get the WWID of the device and assign more readable names.

  You now discovery point ASM string drive in /dev/asm / *.

  Once you enter the basics above (it is not that the resort), you can get very creative with how you want to identify the devices for ASM usage - and how you create and name (symbolic link) of the names of devices for ASM.

• Portege M400: Installtion Windows - cannot install the RAID driver

  Hello world
  I installed my original form of the system DVD Toshiba (60 GB partition).
  So, I bought the second system with my notebook (Windows XP Pro OEM PL) and I want to install it on my second partition. When installing WinXP installer asked me about RAID driver on drive A: (I USB floppy drive, so it's no problem)... next step - partitioning - no problem. But when Windows starts to copy files (after select and format partition), ask again on RAID driver disk A: - and that is the problem, because my floppy drive is not present (maybe disable it windows after formatting the partition, I don't know)...
  There is also no results:
  -J' tried to install Windows on USB HDD, but there are blue screen after the first reboot,.
  -J' have tried to compile the RAID driver in driver.cab, this does not (or I did wrong).
  Someone has an idea how to install my second system? It is OEM, and I don't want to lose him.
  .. Sorry for my poor English :)...

  Hello

  After installing the driver RAID you should not make any partition or format the HARD drive.
  If you do this, the RAID driver is deleted and you will get an error.

  So do all the changes on the HARD disk before you install the RAID driver.

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• Satellite L655-1FO - how to install the audio driver?

  How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

  Hey,.

  Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

  Download & install SP3 and then you can start with the driver installation :)

• Satellite L10-209 - how to install the display driver for Windows 7?

  I formatted my * Satellite L10-209 * and * Windows 7 *. All the drivers installed fine but the * video card *: xD

  How to install the display driver (graphics card)?
  Tools & Utilities CD does not work with Win7,

  Hello

  I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)

  Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
  http://www.Intel.com

  Check this box!

• How do I create an ASR without floppy drive?

  is it possible to create an ASR without floppy drive, can I do the computer using a USB key instead?
  as you know all computers are more equipped with floppy drives.
  any help is appreciated.

  The answer to the original question is:

  You do not have.

  If you are using in relying on the built in NT backup to back up your system, it is the primitive technology (because he wants obviously - a floppy disk).  If you have a disaster (even minor), you'll have a big problem.

  If you want to make a backup, it is logical to use modern technology - and it is not integrated with XP.

  There are many popular options for XP Backup and imaging software (s) of third parties.

  A people a popular seem to love East of Acronis.

  With this (free 30 day trial) you save, make a bootable CD or USB bootable (which is modern, huh?) and use disaster.

  They used to have a completely free version - maybe no more - just the trial, then you must buy it, but it is highly respected.

  It is so much more robust than the XP Backup, it's laughable.

  Many other options if you do a little research on Google...

  Here are a few products that PML suggested could be appealing:

  Macrium Reflect
  Paragon backup and restore
  DriveImageXML

• How to install the second hard drive in the Dell XPS 8900

  My new Dell XPS 8900 only has a single HH and I would install a second HH.  Probably 3.5 SATA internal a 2 T.  I need a repair of XPS 8900 so that I know how to install the second disk.  I just need a few simple instructions so that I know how attached a data cable SATA and do the go by car.  Direction will be appreciated.

  You will need the drive AND a data cable.  The manual is here:

  www.Dell.com/.../manuals