How to install Visioneer Strobe XP 100 Scanner
How to install scanner on Windows 7
There are guides to the user, to drivers and other software for your scanner here:
http://support.visioneer.com/products/XP100/downloads_r3.asp .
Tags: Windows
Similar Questions
-
How to install a CanoSan Lide 100 scanner to my laptop with Windows XP?
HOW TO CONNECT THE SCANNER TO A LAPTOP MODEL HP?
How to connect a CanoSan Lide 100 to a hp laptop windows xp computer?Quick Start Guide: http://www.copiercatalog.com/catalogfiles/CanoScan_LiDE_100_service.pdf
Do not connect the scanner until you are instructed to do so.
J W Stuart: http://www.pagestart.com
-
How to install Adobe (purchased with a scanner) on another computer?
I bought Adobe XI with a Fujitsu scanner. I just had to get a new computer because my last one (where I installed initially Adobe) crashed. The news has no DVR/CD drive so I can't install it that way. And when I tried to download, the installer said that my serial number was not valid. I know that it is valid, however, because it is marked 'serial number' on the cover of the disc. Can anyone help?
Adobe is a company... what Adobe program that you say?
-http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-
How to install a driver for Visioneer 5800 Scanner
How to install a driver for Visioneer 5800 Scanner
[Moved from comments]
Hello
Go to http://support.visioneer.com/ to find the correct driver. Download and install it.
You have not provided your version of Windows, but it seems (in a nutshell) that the latest drivers for the 5800 were written for Windows XP/2000.
Don
-
How to: install the driver for scanner "visioneer onetouch 8920 usb" diskless
Original title: is there a way to get a "driver" for my scanner "visioneer onetouch 8920 usb", other than the dish that comes with it? (I have no disc drive for my netbook)
I recently got a netbook, the Acer aspireone running windows 7 starter edition, I have a scanner, visioneer onetouch 8920 usb. the netbook I have has no disk drive, I plug the scanner and windows cannot load the driver. I need help to find how to install the driver, so I can use this scanner.
Driver download page (but the latest drivers for XP - they will probably not work):
http://support.Visioneer.com/products/8900/downloads.aspTroubleshoot Compatibility
This can help with some (but not all the) programs/drivers:
(1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.
(2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.
(3) after he set up see if it works properly. Note: some programs are perhaps not able to run in windows 7.
More information on how to make older programs in this version of Windows:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
-
Cannot install the driver for my scanner Visioneer Patriot 680
Even with the Visioneer driver for my scanner Visioneer Patriot 680 download, Windows 7 Professional will partially install the drivers and then reject them. The computer sees the machine, but stated that there was no pilot. Scanner will not run. How can I get the program be accepted?
Original title: OneTouch
I pass by the site of Visioneer.
It turns out that the problem was a fragmented removal of the old drivers of Windows XP which can not be deleted automatically. Necessary to remove a manual sequence that a Visioneer technology has helped me through.I had spent hours and hours trying and trying. Even had change the registry.
Thanks for your reply.
-
I need someone to show me how to install the scanner
I need someone to show me how to install the scanner
Contact the manufacturer of the Scanner.
They should have a manual/Instructions online for you on how to install their product.
If they are not: Email/phone them.
See you soon. Mick Murphy - Microsoft partner
-
How to install a driver for a 1200 dpi USB Scanner?
Original title: the driver Installation
How to install a driver for a 1200 dpi USB Scanner?
When you plug the scanner via USB that you see the animation in the system tray at the right end of the taskbar? Click to watch.
If we install a basic driver and comes to Panel > display icon > devices and printers (right click on Start button go to the control panel), then you could get basic Windows Fax and Scan feature by right-clicking on the icon of the Scanner it.
If this isn't the case, install the full software package for the Scanner to its Support Downloads Web page. This should give you the scanner software to run the scan from a PC or a scanner.
Let us know how it goes, or any other help you need.
-
How to install Scanner in Ubuntu 12.04
Hi all
I have a HP Deskjet 3520 e-ALL-IN-ONE. Was able to install the printer in Ubuntu 12.04. But do not know how to install the scanner. I checked this link http://hplipopensource.com/node/190. But who doesn't say how to add the scanner. No idea how to install a Scanner in Ubuntu 12.04.
Pcwizard thanks for the reply.
I thought about it myself. Just had to install the latest package of linux drivers and was then just update the package XSane. Once done, I was able to open XSane and scan documents. Works without any problem.
Also you can check which version of the driver is required for the printer from this link.
http://hplipopensource.com/hplip-Web/supported_devices/index.html
-
I have a Macbook Pro which is not a hard drive. How to install Adobe Photoshop elements 11 that came with the Epson scanner, I bought. I registered S/N, and I can't find the free download anywhere alone trials.
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
- Lightroom: 5.7.1. 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
How to install scanner without installation disc?
How to install Canon CanoScan N 656U for Win XP without the installation CD?
Download the driver and (possibly) the Canon CanoScan Toolbox--> http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_n656u#ServiceAndSupport
-
Re: How to install Windows Xp on pre-Vista laptop Satellite A300?
Hello
I am now faced with a problem when I try to install windows xp on my pre-operating system Windows Vista laptop...
A300 when I entered windows xp disk and boot from the cd/dvd... There is an error telling me that: you have viruses on your hard drive or scanner virus, or something like that, but I test the same OS disc in another pc and his work I also Gdata IS 2012, and I think that his restriction from toshiba or I don't know , but it is very important to install windows xp...I hope help you how to install windows xp on my laptop.
Concerning
JohnHello John
It is not easy to understand the whole situation, especially the part with the virus.
In my opinion, Windows XP Home edition installation should not be problematic.What you need is Windows XP Home SP2 or SP3 and driver SATA edition disc. Without SATA driver disk HARD will be not visible to Windows XP Home edition.
More info on what you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38
-
e-studio 202l & Copier 600 - how to install and use?
My Agency (I work for a State gov ' t) is one of these copiers. I want to use the USB interface on a local PC for scanning and printing. I've been unsuccessful with the installation. The TWAIN scanner driver asked me to point to a network device. The State Government cannot afford to install a scanner on the LAN unless it supports Kerberos.
How to install a driver TWAIN on a PC to use the USB scanner? How can I print using a USB port? Here's what I've done so far.
I found the file to download for copiers. I ran the self-extracting exe and then unzipped the file for the 202 l. I ran the webinstaller to the printer and the scanner. The printer acts like it prints, but nothing happens.
After you run the webinstaller to the TWAIN driver, I went in Word and went to insert an image from a scanner. The twain driver ran, but asked me to find a device on the network. I don't see a choice for a USB scanner.
What should I do to get the photocopiers of scanning and printing?
Thank you
AlDid you look at the user manual? Maybe it has instructions for installing the USB or the limitations of USB.
-
How to install driverupdate LAN for Qosmio G20?
In response to an alert from Toshiba, I downloaded an updated their site driver LAN driver. I can not find, however, any info on how to install it despite the statement on the website info would be on this site or in the downloaded file.
No icons probably looking in the file to produce anything. Any suggestions on how I might proceed? I have a Qosmio G20 (PQG21).
You'll have to do it the manual way:
(1) unpack the contents of the downloaded lan - xp - 80430.zip file to a temporary location as c:\landriver
(2) open the control panel and double-click the system icon
(3) in the brand-new "System Properties" box click on HARDWARE on the top bar
(4) now, click on 'Device Manager' and a new box will appear with several tiny icons.
5) click on the "Network adapters" icon and select your Lan card (.. .should say something like INTEL and 100)
(6) right click on the entry of Intel (r) and select "UPDATE DRIVER"
(7) now follow the instructions in the "Update Wizzard'...(x) No, not this time---> NEXT
(x) install from a list or a specific location---> NEXT
(x) do not search, I will choose the driver to install---> NEXT
(x) have Disk---> NEXT(8) where it is said: "copy the Builder files from" you must NAVIGATE to the folder you created in step 1 (c:\landriver)
(9) now choose 'E100b325.inf' If you are running Windows XP OR E100ant5.inf if you are running Windows 2000 [choose the option for Windows XP]
10) confirm with [ok] in the event that a box will appear telling you that the drivers are not certified by Windows, blah blah blah
(11) reboot if your computer askI don't think its necessary to update your LAN driver unless you had problems with your network adapter.
I have described the procedure of a manual update which is exactly the same for each device. I can't
confirm if these drivers work on your computer, even if they should according to INTEL.
If you face problems to use your LAN card after the upgrade of drivers, do not hesitate to roll back to your previous settings... but for the moment let's hope we don't need to explain how to do this. ;)Good luck
chain
-
How to install Vista from the recovery disk without defining partitions?
Hello
I have my recovery disk and I have installed a new 320 gb HHD.
When I installed the recovery disc, it re done the 160 GB partitions in each (2 partitions more the 1 recovery partition)...But I want to dual boot with XP pro because of software problems and I prefer it sometimes...
I redid my scores, 1 - 51 GB for XP pro(32bit), 2nd - 51 GB for vista (32 gb) and the 3rd - 210 gb is for storageHow to install with Toshiba vista o/s and stuff that comes with it on the recovery disc, immediately to the 2nd partition without affecting how I configure the hard drive...
I have about 100 GB of photos, music, and cam vids on storage, with nowhere to put them, so I can't risk, because some are copy only (so it might be a good idea to let me know how I save this s on my storage spread in the DVD please)
If I can t, then can some1 please tell me how to get my Toshiba OEM vista off this recovery disk or a link for me?
Hope all this makes sense lol... Thank you
ShaneIf you have so much important material best save is to buy an external HARD drive and copy all this stuff here. I recommend buying the small 2.5 external HDD and when necessary, you can take with you and connect to any computer, if you want to view or copy this file. External hard discs connected to other computers with a supplied USB cable.
Return to your partitions.
When you use the original Toshiba DVD facilities, you will have 3 partitions.
WinRE - partition and it belongs to the Vista operating system. This partition is not visible, and this isn't some sort of Toshiba recovery partition
-C for Vista partition
Or-d/E to the DATA in the partition. This partition is recorded recovery image in the folder called HDDRecovery
I don't know what model of laptop you have, but this configuration is on all new Toshiba laptops shipped WITHOUT recovery media.Using Toshiba recovery media, you will be able to get exactly mentioned structure of the partitions. Support to recovery facilities using you WILL NOT be able to install Vista on the second partition.
So if you want to have the dual boot with Windows XP Home edition, you can do following:
-At first, you are going to install Vista with support of recovery and on the second partition, you are going to install your version of Windows XP Home edition
-At first you will be installing WXP and then you can install Vista on the second partition, but you must use the Microsoft facilities drive. Recovery media can not be used.That's all I can say from my experience with such things.
Maybe you are looking for
-
AssistiveTouch and screenshots
I'm in iOS 9 on my iPod Touch 6 and the iPhone 5. When I take a screenshot, AssistiveTouch button is not hidden, as if it was on the previous version of the iOS. I'm still on iOS 7 on my mini iPad 2 and I don't have this problem. is this a bug in iOS
-
I have Firefox on three systems using sync to keep them in line. All have been updated to 35.0.1, however, only a new sync watch, the other two show the synchronization of the former. The new synchronization version runs on Win7, the other two move o
-
I get an error message when you try to install the game... http://img693.imageshack.us/img693/512/27252568.jpg my account is the admin... Help, please
-
How to enable wireless communication between two clients?
I've got a WRT54GL with the latest firmware. I have two computers that are both connected to the router with the IP via DHCP addresses. Nor has a firewall running. I can't communicate with them - even ping does not work. I can ping the router its
-
Recently, my laptop crashed and would ONLY start for "Recovery Manager" with 3 options for "need help immediately!": 1 the Microsoft System Restore (which did NOT work for ANY of the listed restore points), 2. System recovery (or something to that ef