Install Windows 7 without Dual Boot

Similar Questions

• How to install windows XP in dual boot os in my laptop HP G42-351TX preloaded with Win 7

  My laptop has the configuration as follows:

  Intel corei3 processor

  2 GB OF DDR3 RAM,

  320 GB SATA HARD DRIVE,

  ATI Mobility Radeon HD5430

  When I tried to install XP in reducing the volume and create the new disk, collapsed with BSD saying material changed, check the drive for errors and viruses with error code (I forgot) etc after installing some drivers. It will stop only when "starting windows" like status bar message. I need to install XP only incase if we cannot install the dual boot OS. Pls tell me the step by step procedure to do this.

  Sorry, but your new HP G42-351TX is not supported by the old operating system to Windows XP.  If you want to install Windows XP, yopu need via Windows XP Mode.

  Install and use Windows XP Mode in Windows 7

  Windows Anytime Upgrade: Windows 7 Home Premium to professional

  Carey Frisch

• How to install windows 7 in dual boot on Satellite M840?

  Hello

  I've had this laptop M - 840 a week ago, pre-installed with windows 8. I can't replace the operating system with windows 7 as most of my Win 8 incompatible applications. I'm tired of clean install - does not work. I created a NTFS partition and tried to install win 7 on the new partition, but this isn't just beyond 'Windows startup screen. Any help in this regard will be highly appreciated.

  Kind regards
  C4I - OPS

  >. I'm tired of clean install - does not work

  To install Windows 7 on the laptop of Win8, you must change some settings in the BIOS.
  First of all, you have to disable startup secure in the BIOS.
  Second pass of the UEFI BIOS for the CSM and save the changes.

  Now you should be able to install Win 7

  But before doing this, I recommend that you create the recovery media (Flash disk to USB memory or recovery Toshiba

• Windows 7 is not genuine, after the installation of windows 8 in dual boot.

  When I want to upgrade to windows 8, Windows 7, I think I should try windows 8.

  So, I installed windows 8 with dual boot.

  But after the successful Windows installation 8, when I started my laptop with windows 7 OS, it shows that the copy of windows is not genuine.

  What should I do?

  How can I get my windows 7 back as it was?

  Please help me... :'(

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste the results in your answer.

  As a starting point, the first thing you should check is the section to three figures on the number of product ID, if it corresponds or is included in one or two digits of the examples below, you have probably a MSDN or TechNet product key. "These keys must not be sold for retail use.

  065 066 067, 068, 069 to Ultimate, box 220 for professional and 230, 231, 232 area for Home Premium,

  There are probably others, but they should be close to those that are displayed"
  (How to be certain - download the Microsoft Genuine Advantage Diagnostic Tool listed above).

  Note: Though that illegally sold MSDN/TechNet allow product key for activation of more than one
  (usually 5 or 10), so these keys can be sold "several times" before activation may fail.

  J W Stuart: http://www.pagestart.com

• How to remove Windows 7 from dual boot XP and Windows 7?

  I have orig. had XP installed 7 and then uninstalled 7 back to XP. Made a mess. Just try to return to the single operating system. What are your suggestions?

  * original title - two versions of Windows XP & Windows 7 *.

  Hello

  Click on the link below.

  http://www.mydigitallife.info/2009/01/17/how-to-uninstall-and-remove-Windows-7-or-Vista-leaving-Windows-XP-on-dual-boot-system/

• Removal of partition of Windows 7 from Dual Boot Windows 7/8

  I recently installed Windows 8 on PC from a parent, because it's the upgrade $ 14.99, uncertain about whether my parents would be as W8, I decided to double it start alongside W7.  However, my parent loved W8 and he now uses as its main operating system.  My problem is, how safely get rid of the partition of Windows 7? Try to remove it cause the laptop to be unable to boot because it seems that the boot files are still on the W7 partition.  Is there a way to make the W8 the 'boot' partition, perhaps by creating / copying the boot somehow files?

  Solved, here is how I fixed it in case someone else runs into a similar issue:

  1 installed and run EasyBCD on Windows 8

  2 open the BCD Backup/repair and C: set as default boot drive

  3 used Minitool Partition to delete the partition in which Windows 7 has been installed and extend Win 8 partition on unallocated space

  4 restarted, Dual Boot screen appeared, though there is only a single OS installed, so re-opened EasyBCD on Windows 8 and remove the entry from Windows 7 in Dual Boot menu

  Note that this is a VERY good idea to keep a Windows 8 installation disc/USB on hand at any time during this procedure, in case something goes wrong.

• HP Envy 17: Clean install Windows 10 without upgrade.

  Hello

  First of all, I am very happy with my new HP laptop first, it's amazing!

  Now my problem. The laptop came with 8.1 Windows preinstalled with a free upgrade to Windows 10, however, I want to do a clean install Windows 10 without going through the process of upgrading (or would defy a 'clean' install), without additional software (I have already downloaded all the drivers and software from HP Web site) and I wanted to make the installation of the driver/software myself.

  Now, I had the key OEM with software, however...

  I read several threads related to this problem, the recommended steps were required to use the creator of media, but that won't install it Windows 8.1? I know that I coud after upgrade, but I wanted to avoid this step

  In any case to create support for Windows 10? If I clean install 10 Windows with a retail key, I'll lose the built in recovery?

  Thank you very much for your kind attention,

  Best regards

  Francisco

  To answer your questions:

  (1) MS media creation tool: Activation in Windows 10 - Windows help offers several options: to upgrade this PC now, create installation media (download the ISO file), create an installation (DVD or USB) media.  Choose the option that suits you - understand that upgrading PC, this option does NOT create an ISO file or installation media.

  (2) lose the built-in recovery.  IF you ask on the resumption of Win8x HP - then Yes.  That no longer works after upgrade Win10.

  (3) retail vs upgrade and recovery: Version does not matter, you will lose HP Win8x recovery without worrying.

  (4) retail key - you get ONLY a touch of detail if you buy a copy at Win10 retail.  The version proposed for the free update does not product keys for activation.  You MUST install a version upgrade on top of an existing installation of Win7/8/8.1 so that it will activate.  If you install directly from media Win10 Upgrade, starting from the media and did an install clean, not only will win 10 then NOT activate, right now, it will NEVER activate.  MS talking about providing an option IN THE FUTURE, to allow people to enter a Win7/8/8.1 existing product key - but this feature is not present today.

• Can I switch from Windows XP to Windows 7 by installing Windows 7 without uninstalling XP?

  Original title: improvement of the operating system.

  Can I switch from Windows XP to Windows 7 by installing Windows 7 without uninstalling XP?

  Yes, and in fact you must do in order to qualify for the upgrade price.  You must realize, however, this update of XP to 7 involves a "custom installation" - that is, you must save your data first (on external support) and to reinstall all your applications after that Win 7 is running.

  Under certain circumstances, installing Windows 7 might create a windows.old file, but it's not clear to me what is stored in memory in the transition from XP to 7. you will certainly be able to run one of your older applications without having to reinstall them.  See, for example, http://www.chron.com/business/silverman/article/Going-from-Windows-XP-to-Windows-7-It-s-not-1609463.php

• I can install Windows 7 without initially providing the product key?

  Peut I install Windows 7 without initially provide the product key during installation?  I'd rather go once the installation is finished, I just have to copy and paste it in the email like that.

  Hello

  Yes, you can try a free key of Windows 7 Installation. But be sure that you enter the product key to activate Windows wihtin 30 days grace period. Once the 30 days grace period end your system will go in any safe and you may need to reinstall the copy again.

  Unlike Windows Vista, if you si vous achetez buy Windows 7 DVD you get specified edition disk and installation you will not get an option to select the edition. Almost to the last step of the Installation, you will get the opportunity to enter the product key that you can jump and try to enter the product at the time of the Activation key.

  http://social.technet.Microsoft.com/forums/en-CA/w7itproinstall/thread/7d72d093-Eee7-40F4-9550-cbda71b2fcdd

  Thank you
  Hamidou ndiaye

• Windows Vista Ultimate: SP1 CD can not install for me to Dual-Boot 7 and Vista

  Hi I'm new here.

  I have Windows 7 Ultimate on my computer. I have 3 drives, F: reserved system, C: (where Windows 7 is on) and blank D: 20 GB Partition.

  I am trying to install Windows Vista, so I can dual-boot, but I get an error code saying that there is not enough disk space on my F: reserved system, but I try not to install it since their, I try to install from the D: drive.

  So I tried another way, I Booted from the CD, and Setup continues. But, when I clicked on my D: drive it says it cannot copy files when going from 3%.

  Question:

  1. I did a wiped fresh clean installed Windows 7 Ultimate, and it created a partition of 100 MB. What's causing Windows Vista to install correctly?

  2. If Question 1 was the problem, do you think I should wipe my entire C: drive and erase the entire disk for Windows Vista to fix itself?

  Thank you

  New Member.

  I found the problem:

  System reserved (f) had to be removed... (:

• Install Windows 7.0 Upgrade worm on a 8.1 of Windows as a dual boot?

  I use Windows 8.1 on my new out of the box PC and would like to have a dual boot with Windows 7.0 that I'm having a lot of problems with the Windows 8.1 and the recording software and hardware, that I am running.

  I had Windows 7.0 no (or very little) problems with my software registration or hardware.

  Is it possible for me to have Windows 7.0 and Windows 8.1 as a dual boot with my Windows 7.0 upgrade DVD, without blowing the OS Windows 8.1?

  Thank you

  Tony

  Hello

  Please contact Microsoft Community.

  I suggest you refer to the suggestion given by Andre Da Costa in the mentioned thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/dual-boot-Windows-8-Pro-and-Windows-7/0c2887f8-fbe8-489a-BA20-b8ba2dfb0eab

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps.

• How can I install Windows 10 on my laptop Windows 7 in dual boot?

  I want to install Windows 10 when it is available, but don't want to lose my current Windows 7 system.

  I hope that I can set up as a dual boot.

  What is the best way to do it?

  Yes, it would be valid for both architectures. Make sure that the key is not yet installed on any system.

• Install Windows 7 Professional 32 bit - on a 64-bit of Windows 8 for dual boot computer

  Is this possible?

  When I get to the part where the installation is asking me to select a partition, it indicates that the drive must be in NTFS format. Windows 8 says that they are formatted in NTFS.

  No idea why I get this error?

  Help for this type of installation would be useful, including assistance to the implementation of a dual boot.

  Thank you

  The Windows 7 installation disc is maybe damaged. Download Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  Windows 7 Professional 32 bit: http://MSFT.digitalrivercontent.NET/win/X17-59183.ISO
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available. Make a small group of updates at the same time (max 10)

  Reboot if you are prompted, save updates .NET Framework to the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Acer Travelmate 7750 G freezes completely using Windows or Linux (dual boot). Need help please.

  The problem is that the machine freezes completely without apparent reason, on all operating systems, I tried.  "Freezes", I mean there is no reaction to the mouse movements, keyboard presses and start button / stop pressed off the coast.  The gel seems to be at a random time and may occur even when the system is idle.

  The Acer Travelmate 7750 G laptop came pre-installed with Windows 7 and it kept freezing.  The machine has been updated level of Windows 8, 8.1, 10, then dual boot with Linux Mint 17.3.  The machine froze on all operating systems.  I have tested software hard drive, memory, CPU, GPU and they all managed very well.  Is it someone who has knowledge about how to resolve or others troubleshoot this please?

  RESOLVED - I installed a HDD replacement in December 2015 and the laptop Travelmate 7750 G works perfectly since.  Cost me almost nothing compared to the price of the laptop.  No freezing, crashing or anything else!

  Thank you very much for your help.

• Using Windows Xp and Windows 7 in dual boot

  Hi all

  I'm new here because I like your forum for quick answers.

  Yesterday, I installed windows 7 on my laptop and Windows Xp added today.
  I want to have a dual operating system, so I can choose where I want to work.

  The problem is that Windows 7 is not available but only windows xp.
  I read it beter to install xp before 7.

  How can I manage now?
  Should I do a fresh install for Win 7?

  First of all it of Nice to hear that you like this forum, I love him too ;)

  Back to your question;
  You can use Win 7 and Win XP together!

  First of all, you need to install Win XP.
  You then create a second partition for Win XP.
  Then, you need to install Win XP on the second partition.
  But it could damage the Win 7 Startup Manager and you will be able to choose only to Win XP.

  This can be repaired. You take a disc of Windows 7 (not recovery disc! Win 7 disc should be) and have to boot from that disk it will repair Windows 7 boot disk

  Now, you might start in Win 7.
  Here you need to install a tool called EasyBCD. It s a Boot Manager tool that helps you to the entrance of Win XP to Windows 7 Boot Manager

  After that two BONES; Win 7 and Win XP will appear in the Boot Manager.

  Welcome them