How to interpret the orbit and Point of reference Timebaseplot

Similar Questions

• How to interpret the data cache setting and the current value of data cache?

  How to interpret the data cache setting and the current value of data cache? We found that even, we configure a larger data cache in Essbase 2 GB for example, the current value of the data cache is always much lower. Does that indicate an activities of data at very low recovery or something else?
  
  Thanks in advance!

  Hello

  When a block is requested, Essbase searches the data for the block cache. If Essbase is the block in the cache, it is immediately accessible. If the block is not found in the cache, Essbase in the index for the appropriate block number and then uses the index of the block entry to retrieve from the data on the disk file. Retrieve a block requested in the data cache is faster and therefore improves performance.

  So as you say that its current value is much lower then % is very low, that a requested block is in the cache of Essbase data.

  Hope that respond you to the.

  Atul K

• How to record the numbers and words in the same file

  Hello:

  I did a vi where I record the spectrum and its integration in different positions of a two-dimensional net. I save the information in two spreadsheet with the comand "write to file measure."

  Now, I am recording the parameters initial positions, end X X and space between measurement points. I want a file with two columns that looks like:

  Initial position X 1000

  final position X 2000

  space 100

  But idon't know how to save the words and numbers in the same file.

  As I have to perform several steps I want to automatically choose the name of the file (something like parameters_1, parameters_2...)

  Thank you for your attention

  Hi bitxor.

  You can use all the functions of the WriteTotext file to write strings to a file.

  Then you could set up WriteToMeasurementFile' to add new data to existing files (instead of overwrite or renaming)...

  BTW. It is not a good idea to mix lvm files containing arbitrary spreadsheet data!

• Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod.

  Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod. This has been brought to the attention of Adobe in December of 2014 by others. If you import a footage in Adobe Premiere elements 11 or 12, you can eliminate the black bars on the sides by setting predefined settings correctly and using properties and interpreting the film. Not the same with 13 elements. What has been done to correct the problem? How users can be compensated for the purchase of a program or upgrade to a program that has a fault serious?

  Please notify.

  fran3

  What you report a known problem with elements 13/13.1 first I wrote about back in December 2014, and whenever the subject came up in the Adobe Premiere elements Forum.

  First Elements ATR troubleshooting: EP: 13 serious problem with. MOD Widescreen files

  I have not seen Adobe personal or PRE_help this issue whenever it appears in one of the threads here. The frequency of appearance of personal Adobe or PRE_help is not defined. It's a call from Adobe on ignore or fix in the next version or other.

  This isn't Adobe. Instead a user. You need to contact Adobe to know the why of the situation and what his plans are to remedy the situation in order to allow the usual workaround if this is a solution that will make unnecessary workaround.

  You have a chance by converting the widescreen is a mod to another format that would recognize the flag of 16:9 wide screen of is a mod, if 16:9 is really there.

  RTA

  Add on... Consider

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• How to install the plugin and outside the filter in photoshop cs? and all the Special filters for special effects?

  How to install the plugin and outside the filter in photoshop cs? and all the Special filters for special effects?

  Please recommend me a better and such me step by step how I'll add more plugins n filter

  One I normally come with an installer or installation instructions. See the documentation for the plug-in you are trying to install.  It sounds like you don't know what plug-ins you want to install.  In this case, you don't need to install a.  At some point, you can read about a plug-in and what she can do and you feel you need it.  Then you will have a reason to install a plug-in that is not installed by default.  There may be a cost involved more useful plugins are not free.

  Adobe Plug_ins optional downloads are Plugins Adobe want from Photoshop and is no longer installed by default. Also at some point is no longer will install in the course Photoshop Adobe will remove the functionality or use of interfaces. For example CS5 optional plugins install in perpetual CS6 Windows version 13.0.1.3 but not in version 13.1.2 subscription or perpetual Mac version 13.0.6 fot its 64-bit only and CS5 Mac Optional Picture package plug-in is a plug-in of only 32-bit.

  You will need to keep older versions of Photoshop if Adobe remove features you use in newer versions of Photoshop.

• How to move the ball and chain together?

  I created a bunch of balloons 3D and applied the preset wiggle individually to each ball. The strings are also different with each of the others that I have related to the respective ball but cannot work out how to apply for balloon wiggle and channel "move together". At the point where the ball moves in a direction and strings in another even if they have the same settings.

  Could someone please advise how to do the ball and chain squirm together?

  Thanks in advance

  Tutorial a zillion years here on the kite. It might as well be a balloon. I don't know why the QT link is broken, but this is a update of project CS5.5 folder for you to watch.

  Here's the movie:

• How to interpret the result of validation.

  How to interpret the result of validation.
  
  13366 [element < 7 >] [3, 4 rings] [edge < 0 > < 3 > cycle] [edge < 0 > in the < 4 > round]
  
  -ORA-13366: incorrect combination of inner outer rings
  -Cause: In Oracle Spatial geometry, the inner and outer rings do not always serve.
  -Action: Make sure that the interior rings corresponding to an outside ring follow the outer ring of the orderly table.
  
  I think it means that the rings 3 and 4 in element 7 have inside outside questions vs, but element 7 has no rings 3 or 4; There no cycles 1 and 2.
  
  I'm using Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  You can call sdo_geom.sdo_union on this geometry to fix.

  It's

  Update de_lec set c.lec_gcode = sdo_geom.sdo_union c (c.lec_gcode, c.lec_gcode,: tolerance)
  where c.lec_gcode = '9417';

  There is no fix for the problem of validation still on 11.2.0.2, so you have a file a bug for it if you need this patch.

  Siva

• How to calculate the second and minisecond for audio landmark

  I'm doing a sound synchronization for the clip audio and video in Flash. I found a tutorial on the web, and it seems to work. However, I do not know how to calculate the second and the mini (deuxieme from mp3 file. The first frame has the following lines to set the duration for each animation:
  Import class
  Import net.quip.sound.SoundSync;
  
  Stop the main timeline
  Stop();
  
  Create an instance of SoundSync
  var ss:SoundSync = new SoundSync();
  
  ss.addCuePoint ("IT", 20100);
  ss.addCuePoint ("admin", 20000);
  ss.addCuePoint ("maintenance", 19800);
  ss.addCuePoint ("treatment", 16479);
  ss.addCuePoint ("engineering", 14598);
  as.addCuePoint ("logo_epa_npdes", 12356);
  ss.addCuePoint ("construction", 8967);
  ss.addCuePoint ("370 mg/j", 7896);
  ss.addCuePoint ("mc_650, 000 ', 5439);
  ss.addCuePoint ("130 mg/j", 3254);
  ss.addCuePoint ("1938", 2439);
  ss.addCuePoint ("vintage_mc", 0);
  
  Use the instance of loading external MP3
  ss.loadSound ("Scn04 - 05.mp3", true);
  
  Create a listener object for the
  cuePoint and onSoundComplete events
  var listener: Object = new Object();
  listener.cuePoint = function (): Void {}
  Play();
  }
  listener.onSoundComplete = function (): Void {}
  Play();
  }
  ss.addEventListener ("cuePoint", listener);
  ss.addEventListener ("onSoundComplete", listener);
  
  and the soundsync.as file as follows:
  Import mx.events.EventDispatcher;
  Import mx.utils.Delegate;
  class net.quip.sound.SoundSync extends its {}
  PROPERTIES
  private var _cuePoints:Array;
  private var _currentCuePoint:Number;
  private var _interval:Number;
  private var _intervalDuration:Number;
  private var _secondOffset:Number;
  Event dispatcher
  public var dispatchEvent:Function;
  public var addEventListener:Function;
  private var removeEventListener:Function;
  CONSTRUCTOR
  public void SoundSync(target:MovieClip) {}
  Super (target);
  init();
  }
  METHODS
  private function init (): Void {}
  Initialize properties
  _cuePoints = new Array();
  _currentCuePoint = 0;
  _intervalDuration = 200;
  _secondOffset = 0;
  Initialize the instance of the class as the valid event broadcaster
  EventDispatcher.initialize (this);
  }
  Add Cue Point
  public void addCuePoint(cuePointName:String,_cuePointTime:Number):Void {}
  () _cuePoints.push
  {
  type: "cuePoint",.
  name: cuePointName,.
  time: cuePointTime,.
  target: this
  }
  );
  _cuePoints.sortOn ("time", Array.NUMERIC);
  }
  Get cue point
  public void getCuePoint(nameOrTime:Object):Object {}
  var counter: Number = 0;
  While (counter < _cuePoints.length) {}
  If (typeof (nameOrTime) == 'string') {}
  If (_cuePoints [meter] .name == nameOrTime) {}
  return _cuePoints [counter];
  }
  } Else if (typeof (nameOrTime) == 'number') {}
  If (_cuePoints [meter] .time == nameOrTime) {}
  return _cuePoints [counter];
  }
  }
  counter ++;
  }
  Returns a null value.
  }
  Get the Index of the current Cue Point
  private void getCurrentCuePointIndex(cuePoint:Object):Number {}
  var counter: Number = 0;
  While (counter < _cuePoints.length) {}
  If (_cuePoints [meter] .name == cuePoint.name) {}
  return the meter;
  }
  counter ++;
  }
  Returns a null value.
  }
  Get the next Cue Point index
  private void getNextCuePointIndex(seconds:Number):Number {}
  seconds (seconds) =? seconds: 0;
  var counter: Number = 0;
  While (counter < _cuePoints.length) {}
  If (_cuePoints [meter] .time > = seconds * 1000) {}
  return the meter;
  }
  counter ++;
  }
  Returns a null value.
  }
  Benchmark deleted
  public void removeCuePoint(cuePoint:Object):Void {}
  _cuePoints.splice (getCurrentCuePointIndex (cuePoint), 1);
  }
  Remove all Cue Points
  public function removeAll_cuePoints (): Void {}
  _cuePoints = new Array();
  }
  Beginning
  public void start(secondOffset:Number,_loops:Number):Void {}
  Super.Start (secondOffset, loops);
  dispatchEvent ({type: "onStart", target: this});
  Reset benchmark
  _secondOffset = secondOffset;
  _currentCuePoint = getNextCuePointIndex (secondOffset);
  Poll for cue points
  clearInterval (_interval);
  _interval = setInterval (Delegate.create (this, pollCuePoints), _intervalDuration);
  }
  Load sound
  public void loadSound(url:String,_isStreaming:Boolean):Void {}
  super.loadSound (url, isStreaming);
  clearInterval (_interval);
  _interval = setInterval (Delegate.create (this, pollCuePoints), _intervalDuration);
  }
  Stop
  public void stop(linkageID:String):Void {}
  If {(linkageID)
  Super.Stop (linkageID);
  } else {}
  Super.Stop ();
  }
  dispatchEvent ({type: "onStop", target: this});
  Kill the ballot
  clearInterval (_interval);
  }
  Survey benchmarks
  private function pollCuePoints (): Void {}
  If the current position is close to the cue point.
  var time: Number = _cuePoints [_currentCuePoint] .time;
  var span: Number = (_cuePoints [_currentCuePoint + 1] .time)? _cuePoints [_currentCuePoint + 1] .time: time + _intervalDuration * 2;
  If (position > = time & & position < = span) {}
  Send event
  dispatchEvent (_cuePoints [_currentCuePoint]);
  Advance to the next landmark...
  If (_currentCuePoint < _cuePoints.length) {}
  _currentCuePoint ++;
  } else {}
  _currentCuePoint = getNextCuePointIndex (_secondOffset);
  }
  }
  }
  EVENT HANDLERS
  onSoundComplete
  public function onSoundComplete (): Void {}
  Kill the ballot
  clearInterval (_interval);
  Reset benchmark
  _currentCuePoint = 0;
  Send event
  dispatchEvent ({type: "onSoundComplete", target: this});
  }
  }
  
  any help will be greatly appreciated.

  Wuzhishan,

  > Hi Dave, your tutorial is very cute and it is very useful.

  Thank you! My daughter is cute. She inherited all of
  me, so I have not left. ;)

  > I'm sorry that I don't have my question clearly.

  No worries. :)

  > I have listen mp3 in Windows Media Player and try to
  > get both for the tail, I found it on the bottom of the
  > player time indicates 00:26.

  I'm with you.

  > How can I writer this number in the code? Is it 0026 or 26?

  The code expects milliseconds, then 26 seconds would be written as
  this:

  26000

  If he said 01:22 (one minute and 22 seconds), you must write it like this:

  82000

  ... which is 60 seconds for now, 22 seconds
  side, then multiplied by 1,000 to get milliseconds.

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How do you the bookmarks and history buttrons open boxes in Firefox 33?

  How I make the bookmarks and history buttons open their respective boxes instead of having to use the submenu stupid button on the sidebar?

  Apparently, the Restorer of classic theme worked for Firefox 29, but it does not work for 33:
  https://support.Mozilla.org/en-us/questions/991080

  There are two sets of buttons of toolbar tools for history and bookmarks in the palette to customize with the CTR extension installed. You need those without drop marker to open the sidebar.

• How I change the fonts and colors of default return?

  I changed the font and the color of the text through the Tools button and the button options and the tab content. I can't find anything tell me how to change the fonts and colors to the colors and fonts by default. Can you advise me? I use Windows 7 Home Premium OS. Thank you.

  Hi Brenda19605,

  You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a & s = do & r = 0 & s = as

  The default settings for the police are in this article:
  https://support.Mozilla.org/en-us/KB/some%20text%20shows%20up%20bold%20after%20upgrade

  Unfortunately for the default color has no good reference. For the text, but it is black (most lower-left), the background is white (color above left). Unvisited links is blue (column 8, line 5) and the visited link is purple (column 9, line 5).

  Let me know if you need help more!

  Lordfreak

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

• How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  I recently had to format my hard drive and reinstall iTunes 12.3.2.35 on my Win7 PC. As part of the re - install iTunes, I clicked on the button scan for music.  This has created duplicates several of my songs.  I deleted then the duplicate songs from iTunes, but when I went to play a few songs a pop-up said "the song would not be because the original could not be found.  You want to locate? "When I tried to locate the song it is not found, but when I pulled the songs out of the trash they could be found.

  How can I keep the original and remove any duplicate songs in iTunes on PC Win7 which took place after iTunes to scan for music during a re - install?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2