How to interpret the result of validation.

How to interpret the result of validation.

13366 [element < 7 >] [3, 4 rings] [edge < 0 > < 3 > cycle] [edge < 0 > in the < 4 > round]

-ORA-13366: incorrect combination of inner outer rings
-Cause: In Oracle Spatial geometry, the inner and outer rings do not always serve.
-Action: Make sure that the interior rings corresponding to an outside ring follow the outer ring of the orderly table.

I think it means that the rings 3 and 4 in element 7 have inside outside questions vs, but element 7 has no rings 3 or 4; There no cycles 1 and 2.

I'm using Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

You can call sdo_geom.sdo_union on this geometry to fix.

It's

Update de_lec set c.lec_gcode = sdo_geom.sdo_union c (c.lec_gcode, c.lec_gcode,: tolerance)
where c.lec_gcode = '9417';

There is no fix for the problem of validation still on 11.2.0.2, so you have a file a bug for it if you need this patch.

Siva

Tags: Database

Similar Questions

Don't know how to read the results of netstat EI s list? If I received 860592506 bytes sent from 43421482 how to convert MB? And does this mean byte received?

Don't know how to read the results of netstat EI s list? If I received 860592506 bytes sent from 43421482 how to convert MB? And does this mean byte received?

Hello

This shows the total number of bytes transmitted and received via the Ethernet card. This is the total of the amount of use up to this day.

This includes all the Web sites you have visited and emails you sent, etc..

You can calculate using one of the following methods:

Method 1:

860592506 / 1048576 = 820,72 MB

Method 2:

Multiply 860592506 with 9.53674316 * 10 ^-7 that will give us the result in mega bytes.

860592506 bytes = 820 MB 9MB not, accept my apology for the miscalculation.
Similarly 43421482 acroos = 40MB

How to display the result of a java class in InputText?
Hi all
How can I get the result of the java classes to InputText or OutputText?
also everyone in the forum can road map me to deal with Java in oracle adf because I am a beginner in oracle adf
I saw a few samples in corner of oracle adf, but it is difficult for me.
I use JDeveloper Version 11.1.2.3, technology of the Adf.
My question is how to return the result of java Bean InputText or OutText
Thank you

see if you want to have show some .so beans instance variable value you can have a few bean .define managed a variable as
string abc = "abc";

create the getter set for her.

in the value property of inputText or OutPutText write an el as #{beanscope.managedbeanName.abc}

How to interpret the return value of $. colorPicker()

Hello
I have a questiion how to interpret the value returned by this function:
$. colorPicker()
It returns a number of strange how convert as usable values RGB.
Any help would be appeciated.

This should help:

function hexToColor (theHex) {}

var r = theHex > 16;

var g = (theHex & 0x00ff00) > 8;

var b = theHex & 0xff;

return [r/255, g/255, b/255,1];

}

hexColor var = $. colorPicker();

var newColor = hexToColor (hexColor);

Dan

How to display the result sqlplus in java?

I want to call sqlplus to run some commands sql in java, but how can I print the result of sqlplus?

In java code, I call sqlplus as:

Process of p;
Run the command
p = Runtime.getRuntime () .exec (commandString);
print the result of the command
InputStream inputStream = p.getInputStream ();

How to display the result of the execution?

Published by: Yi on February 26, 2012 23:41

You can use ProcessBuilder. Copy the following code starts sql * more and runs the script in the variable "filename". It displays the results in the console of NetBeans.

import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.File;
import java.util.Map;

public class test1 {

    public static void main (String args []) {

        test_script();
    }

    public static void test_script () {

        String fileName = "@test_table.sql";
        String sqlPath = "E:\\";

        String sqlCmd = "sqlplus";

        String arg1   = "user/password@sid"; -- plug in your user, password and db name
        String arg2   = fileName;
        try {
            String line;
            ProcessBuilder pb = new ProcessBuilder(sqlCmd, arg1, arg2);
            Map env = pb.environment();
            env.put("VAR1", arg1);
            env.put("VAR2", arg2);
            pb.directory(new File(sqlPath));
            pb.redirectErrorStream(true);
            Process p = pb.start();
          BufferedReader bri = new BufferedReader
            (new InputStreamReader(p.getInputStream()));
          BufferedReader bre = new BufferedReader
            (new InputStreamReader(p.getErrorStream()));
          while ((line = bri.readLine()) != null) {
            System.out.println(line);
          }
          bri.close();
          while ((line = bre.readLine()) != null) {
            System.out.println(line);
          }
          bre.close();
          System.out.println("Done.");
        }
        catch (Exception err) {
          err.printStackTrace();
        }

    }

}

Here is the content of the script at E:\\test_table.sql

Prompt drop TABLE ANOTHER_TEST;
DROP TABLE ANOTHER_TEST CASCADE CONSTRAINTS
/

Prompt Table ANOTHER_TEST;
CREATE TABLE ANOTHER_TEST
(
  BATCH_SEQ             NUMBER,
  BATCH_GROUP_ID        NUMBER,
  STATUS_FLAG           VARCHAR2(30 BYTE),
  OBJ_BEING_PROCESSED   VARCHAR2(80 BYTE),
  BATCH_RUN_START_DTTM  DATE,
  BATCH_RUN_END_DTTM    DATE,
  CREATE_DTTM           DATE,
  CREATE_USER           VARCHAR2(30 BYTE),
  UPDATE_DTTM           DATE,
  UPDATE_USER           VARCHAR2(30 BYTE)
)
LOGGING
NOCOMPRESS
NOCACHE
PARALLEL ( DEGREE DEFAULT INSTANCES DEFAULT )
MONITORING
/

COMMENT ON TABLE ANOTHER_TEST IS 'This is a test table.'
/

EXIT
/

How to display the results in the order based on the value of research

Hi all

How to display the results in the slot order.

 

CREATE TABLE TEST( SONGID  NUMBER, TITLE   VARCHAR2(200))

INSERT INTO TEST(SONGID,TITLE) VALUES (10,'AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (11,'CICCONE, MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (12,'DALLIN, MADONNA LOUISE/STOCK');
INSERT INTO TEST(SONGID,TITLE) VALUES (13,'MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (14,'MADONNA (A)/ AHMADZAI, MIRWAIS (C)');
INSERT INTO TEST(SONGID,TITLE) VALUES (15,'MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (16,'MIRWAIS AHMADZAI, MADONNA');     
INSERT INTO TEST(SONGID,TITLE) VALUES (17,'MIRWAIS (CA)/ MADONNA (CA),AHMADZAI');
INSERT INTO TEST(SONGID,TITLE) VALUES (18,'MADONNA (CA),CICCONE');

SELECT *FROM  TEST WHERE INSTR (TITLE, 'MADONNA') > 0

output: 
SONGID     TITLE
10     AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)
11     CICCONE, MADONNA (CA)
12     DALLIN, MADONNA LOUISE/STOCK
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
16     MIRWAIS AHMADZAI, MADONNA
17     MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
18     MADONNA (CA),CICCONE

Expected output :
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
18     MADONNA (CA),CICCONE
..
..
..
..
...

If the user makes a search with "MADONNA", I view the results as title begins with "MADONNA" first then the rest of the records.
Please let me know is possible to show the results in this order.

Kind regards
Rajasekhar

This can be a little more specific:

SQL> SELECT *
  2  FROM   TEST
  3  WHERE  INSTR (TITLE, 'MADONNA') > 0
  4  ORDER  BY INSTR (TITLE, 'MADONNA')
  5           ,TITLE
  6  ;

              SONGID TITLE
-------------------- --------------------------------------
                  13 MADONNA
                  14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
                  15 MADONNA (CA)
                  18 MADONNA (CA),CICCONE
                  12 DALLIN, MADONNA LOUISE/STOCK
                  11 CICCONE, MADONNA (CA)
                  17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
                  16 MIRWAIS AHMADZAI, MADONNA
                  10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)

How to interpret the data cache setting and the current value of data cache?
How to interpret the data cache setting and the current value of data cache? We found that even, we configure a larger data cache in Essbase 2 GB for example, the current value of the data cache is always much lower. Does that indicate an activities of data at very low recovery or something else?

Thanks in advance!
Hello

When a block is requested, Essbase searches the data for the block cache. If Essbase is the block in the cache, it is immediately accessible. If the block is not found in the cache, Essbase in the index for the appropriate block number and then uses the index of the block entry to retrieve from the data on the disk file. Retrieve a block requested in the data cache is faster and therefore improves performance.

So as you say that its current value is much lower then % is very low, that a requested block is in the cache of Essbase data.

Hope that respond you to the.

Atul K

Can someone help me interpret the results of a log cbs.log file?

My laptop worked little strange - gel sometimes and only excessively slow. I ran chkdsk /f checks and / r. Both went well. I then ran sfc/scannow. The results of this analysis are displayed below. I'm not a pc expert, so I don't know if I'm all together or if there is something else, I have to do. Specifically, the last line of the cbs.log file says, "Verify and Repair Transaction completed. All of the files and registry keys listed in the framework of this operation were properly repaired".

Any help would be appreciated! Sorry for the text copy/pasted for a long time. I cut about 99% of the out and about 1% of the folder (due to a limit of 60 000 characters) just left. I couldn't find a way to attach a file.

Thank you!

POQ 64 ends.

2012-10-09 22:06:25, Info CSI 00000171 [SR] check complete

2012-10-09 22:06:26, info CSI 00000172 [SR] components check 100 (0 x 0000000000000064)

2012-10-09 22:06:26, transaction Info CSI 00000173 [SR] beginning verify and repair

2012-10-09 22:06:37, info CSI 00000174 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

2012-10-09 22:06:37, info CSI 00000175 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

2012-10-09 22:06:40, info CSI 00000176 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

2012-10-09 22:06:40, info CSI 00000177 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

2012-10-09 22:06:40, info CSI 00000178 [SR] this element is referenced by [l:162 {81}] "' Package_17_for_KB948465 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18005.948465 - 60_neutral_GDR" "

2012-10-09 22:06:41, Info CSI 00000179 repair results created:

POQ 65 begins:

2012-10-09 22:17:24, info CSI 00000301 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

2012-10-09 22:17:24, info CSI 00000302 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

2012-10-09 22:17:24, info CSI 00000303 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

2012-10-09 22:17:24, Info CSI 00000304 [SR] this element is referenced by [l:162 {81}] "' Package_17_for_KB948465 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18005.948465 - 60_neutral_GDR" "

2012-10-09 22:17:24, info CSI 00000305 hashes for Member file? \C:\Windows\PolicyDefinitions\inetres.ADMX are not real file [l:24 {12}] "inetres.admx": "

Found: {l:32 b:DjclSPQ + c3ju7E53XXW47eR94SH7ICruHSUKg8YAkO0 =} expected: {l:32 b:3 T / Xc + 0 k/wBxJ4k/vlPd86jLOYtWOjRsHrz0hHH9H8s =}

2012-10-09 22:13:42, CSI 0000027e Info [SR] repair corrupted file [ml:520 {260}, l:64 {32}] '------? \C:\windows\policydefinitions"\[l:24{12}]"Inetres.ADMX' of the store

2012-10-09 22:13:42, CSI Info 0000027f WARNING: file [l:24 {12}] "inetres.admx" in [l:64 {32}] '-? ' "" \C:\windows\policydefinitions' switching property

Old: Microsoft-Windows-InetRes-Adm, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

New: Microsoft-Windows-InetRes-Adm, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

2012-10-09 22:13:44, info CSI 00000280 hashes for Member file? \C:\Windows\PolicyDefinitions\en-US\InetRes.adml are not real file [l:24 {12}] "InetRes.adml": "

Found: {l:32 b:8uqfOni5TmKQ2 + wymJKX9uLDOmUV2H1RKpYV3gacaRw =} expected: {l:32 = b:f2Ca02GHu2Yr3ccXiLvfpdfLkfeeDX2UExmZb6pQm2U}

2012-10-09 22:13:44, info CSI 00000281 [SR] repair file corrupted [ml:520 {260}, l:76 {38}] '------? \C:\Windows\PolicyDefinitions\en-us"\[l:24{12}]"InetRes.adml' of the store

2012-10-09 22:13:44, info CSI 00000282 WARNING: file [l:24 {12}] "InetRes.adml" in [l:76 {38}] '-? ' "" \C:\Windows\PolicyDefinitions\en-us' switching property

Old: Microsoft-Windows-InetRes - Adm.Resources, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

New: Microsoft-Windows-InetRes - Adm.Resources, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

2012-10-09 22:17:25, 00000306 CSI info [SR] repair corrupted file [ml:520 {260}, l:64 {32}] '------? \C:\windows\policydefinitions"\[l:24{12}]"Inetres.ADMX' of the store

2012-10-09 22:17:25, info CSI 00000307 WARNING: file [l:24 {12}] "inetres.admx" in [l:64 {32}] '-? ' "" \C:\windows\policydefinitions' switching property

Old: Microsoft-Windows-InetRes-Adm, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

New: Microsoft-Windows-InetRes-Adm, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

2012-10-09 22:17:25, info CSI 00000308 hashes for Member file? \C:\Windows\PolicyDefinitions\en-US\InetRes.adml are not real file [l:24 {12}] "InetRes.adml": "

Found: {l:32 b:8uqfOni5TmKQ2 + wymJKX9uLDOmUV2H1RKpYV3gacaRw =} expected: {l:32 = b:f2Ca02GHu2Yr3ccXiLvfpdfLkfeeDX2UExmZb6pQm2U}

2012-10-09 22:17:25, 00000309 CSI info [SR] repair corrupted file [ml:520 {260}, l:76 {38}] '------? \C:\Windows\PolicyDefinitions\en-us"\[l:24{12}]"InetRes.adml' of the store

2012-10-09 22:17:25, CSI Info 0000030a WARNING: file [l:24 {12}] "InetRes.adml" in [l:76 {38}] '-? ' "" \C:\Windows\PolicyDefinitions\en-us' switching property

Old: Microsoft-Windows-InetRes - Adm.Resources, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

New: Microsoft-Windows-InetRes - Adm.Resources, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

2012-10-09 22:17:25, created results CSI 0000030b repair Info:

POQ 127 ends.
2012-10-09 22:17:25, all repairs [SR] CSI Info 0000030 c
2012-10-09 22:17:25, CSI Info 0000030 d [SR] validation of transaction
2012-10-09 22:17:25, transaction CSI Info 0000030e Creating NT (seq 1), objectname [6] "(null) '"
2012-10-09 22:17:25, CSI Info 0000030f NT created transaction (seq 1) result 0x00000000, manage @0x14c4
2012-10-09 22:17:25, Info CSI 00000310@2012/10/10:02:17:25.662 CSI perf trace:
CSIPERF:TXCOMMIT; 143298
2012-10-09 22:17:25, Info CSI 00000311 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

Hello

As noted at the end of your message SFC/scannow points out that there is no rest
questions that he can fix.

More information on how to easily read the important information as SFC/scannow
adds to the cbs.log.

Many files that SFC cannot resolve are not important.

Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

put the command from below (copy and paste) in this box and her and then press ENTER.

findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

who creates the sfcdetails.txt file in the folder that you are in when you run it.

So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
in Windows Vista
http://support.Microsoft.com/kb/928228

This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
here. NOTE: there are probably duplicates so please only post once each section error.

You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
(You may need to search sfcdetails.txt if it is not created in the default folders.)

=======================================================

Troubleshooting:

Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.

---------------------------------------------------------------

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).

----------------------------------------------------

Follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

==========================================

After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

Vista and Windows 7 updated drivers love then here's how update the most important.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.

Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us

Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

RunState.ProcessModelClient. how to access the results of markets located in the loops?

Hello

In my sequence, I have to perform an analysis of the results before I have the MainSequence and return to the process template. Basically, I need to check made some steps has passed.

I access the results using RunState.ProcessModelClient. Using what I have access to the list of results. I would like to write that I have access to each result but I can't because I spotted the results of steps which are curly are not accessible (they are not there); However, they are on the report.

How is it possible? How do I access results in a loop? Where are they?

K.

Hello

not too painful:

the loop results in the usual place online, it's just the layout that will look like a little confusing:

You use some revisions of my TestStand (you are in 3.1)

The Runstate.ProcessModelClient is actually a copy of the space of time edit, not space running - it's the SequenceFile type, which means that even if you can see the layout of the result containers that belong to each step, they are there permanently, and not filled in this place from the moment of execution.

At the level of the mainsequence, you're still in your client, then you can go to Locals.ResultList directly.

In there, you have the singular element that is the result of the first and the only stage of your Mainsequence of your.

Inside there is the. TS. SequenceCall container. It is effectivey the resultlist gait that calls (always Mainsequence) seq1 so inside that, there is an another ResultList.

It's the ResultList for sequence "Seq1".

Which has a single item since this sequence has only one step inside of type SequenceCall.

[0]. TS. SequenceCall.ResultList.

From there you can see a lot of results even if you have only 4 effective steps in this sequence.

12 results covers:

3 iterations of ('for' 'Test2' 'end').

and then the last 3 items are "Test1" loop 2 times more.

When you set a stage of the loop and include you the results of each iteration, you get these results (2 in your case) more a global success-failure based on the criteria (your care ot 100% must pass in order to study the step successful when all iterations are complete.)

Note in your pre Expression where you change the name of the step on the fly, your labeled Test2 incremental changes the name from 'Test1' + Str (Locals.LI), and the Test1 marked step uses the same expression for this will look slightly confused that you cross your results.

Hope that helps.

Thank you

Sacha

Rotating table with 6 test stations. How to track the results data at each station to a machine of rotating table with 6 test stations?

I would like to know if someone has worked with table Rotary testsystems and want to share an idea of how he dealt with follow-up of the results of each test result data in all the test station is in the table of rotation, so at the end of the cycle the results of good data by each DUT. There's a kind of technique used in arrays or clusters?

Any comments would be grateful.

Hi shada

There are many ways that you can store your results, such as Matthew commented that you can use an array of Clusters. I would recommend this table of cluster storage in a Global Variable that is functional to make data transfer safer and easier to climb. There are many examples on how to use them on the community.

There are a few tools in advance that you can also use to store your results as Of present value Tables (CVT).

TestStand parallel model with the "Result of processing" option enabled stores automatically all the results of your Tests.

Hope this information is useful.

How to disable the warning of validation on the calculation (read-only) field in the table

Is it possible to add a line in a calculation script (JavaScript) that prevents a dialog box of a calculation field validation?
Scenario:
- Working with fields in a table inserted.
- In each line, I have a couple of fields that the user has entered. These fields have a Validation model has allowed that the user must enter the data correctly.
- There is a calculated field based on the data entered by the users. It is this field that throws a warning dialog box "the value entered for Total_Row1 is not valid. "To ignore the validations for Total_Row1, click on ignore.
Even if I turn off the Model Validation on fields used for the calculation of the warning dialog box always appears. So, it seems to be isolated in the field of computing.
The calculation area displays the time and I got it originally set as a Date/time field, but also tried to use a text field (as the calculation should appear as 0:45 for 45 minutes in this area).
I have a suspicion that the warning appears only because I used an array for formatting fields, as I used similar validation profiles and other calculation fields and see not the message when the fields do not appear inside the table.
I think of easier workaround would be to disable validation for this particular calculation field, but I have no idea how the script that. Any help appreciated lot.
CARI

I discovered the problem. In a word: it was a mistake by naming the fields.
- I have fields named with line numbers in the field name (for example FieldName_Row1).
- and fields calls with FieldName_Row1.formattedVallue must have triggered some confusion.
As soon as I removed the word 'Row' of file names, the question of the warning dialog validation mystery Adobe Acrobat for the calculation field have disappeared.

Ago about 3-4 hours of my life that I won't be back... ha - ha but if someone else has the problem, I thought I better share my discoveries

How to refresh the result iterator to uncommitted changes

Hello
JDev 11.1.2.4
I have a VO with a VC. In my AM I exposed 2 VO:
VO1 = VO without the VC
VO2 = VO with the VC
I have in my user interface:
VO1-based array in which I can add, update, or delete rows.
a button that shows a popup that contains a table based on VO2
Scenario: update
I make a modification on an existing line. The change is made on automatic transmission of true - field.
I click on the button
The table on the shortcut menu shows the changed value
Ok
Scenario 1: create
I have create a new line. Fields to create the new line are all send auto = true
I click on the button
The table on the shortcut menu does not show the new line. It shows only the last State (original + changed lines lines)
KO
Scenario 1: remove
I delete an existing line.
I click on the button
The table on the shortcut menu does not show the deleted row. It shows only the last State (original + changed lines lines)
KO
Q: what can I do, for the table on the shortcut menu shows the current status (non-validated data). I tried to refresh the iterator after a creation or deletion, but I still get the old data?
DCIteratorBinding myIterator = ADFUtils.findIterator (iterator);
myIterator.executeQuery ();
myIterator.refresh (DCIteratorBinding.RANGESIZE_UNLIMITED);
Thank you

It depends on the vo and the Victoria Cross. The two vo must rest on the same area of occurrence. The Victoria Cross should have mode query so (memory and db) and the Victoria Cross on the second vo should be in a way that the new line would be part of the result set if given th could be read from db.

Timo

How to get the result of the query?

I'm looking to get output something like this...
If a profile exists on the Pb, I need Exists in the colum
PROFILE_A EXISTS
PROFILE_B DOES NOT EXIST
PROFILE_C EXISTS
Select distinct profile
decode (profile, "PASSWORD_PROFILE", "EXISTS", 'THERE is NO') 'STATUS '.
of dba_profiles;
How to get the above result? Anyone?

In the first query, you can add any profile you want to check, and then try the below

WITH qry1 AS (SELECT profile 'PROFILE_A' FROM dual

UNION ALL

SELECT "PROFILE_B" FROM double

UNION ALL

SELECT 'DEFAULT' double)

SELECT the profile

CASE WHEN EXISTS (SELECT 1 FROM dba_profiles dp

WHERE dp.profile = q1.profile)

THEN "EXISTS."

OTHERWISE "NOT EXIST".

The END as status

OF qry1 q1;

OUTPUT:-

-------------

SQL > WITH qry1 AS (SELECT profile 'PROFILE_A' FROM dual

2. ANY TRADE UNION

3. SELECT 'PROFILE_B' FROM dual

4 UNION ALL

5. SELECT 'DEFAULT' double)

6. SELECT profile,

7 CASE WHEN EXISTS (SELECT 1 FROM dba_profiles dp

8 WHERE dp.profile = q1.profile)

9 THEN 'EXISTS '.

10. OTHERWISE "NOT EXIST".

11 FINISSENT AS status

Qry1 q1 12;

PROFILE STATUS

--------- ----------

PROFILE_A DOES NOT EXIST

PROFILE_B DOES NOT EXIST

DEFAULT VALUE IS

How to produce the result of the PowerCLI command in an email?

Hello world
Can someone give me help with this example. I started working with PowerCLI and I struggle out of my result in an e-mail message.
How can I store my result in the array and import the data in HTML in an email?
In the example below, I don't see any results in the email of the powercli command "Get - VM |" Select-Object Name, NumCPU, MemoryMB, ProvisionedSpaceGB.
I have to create a loop to retrieve the result?
# - CHANGE THESE VALUES.
$SMTPServer = "SMTP.toto.com".
$vCenterServerName1 = "vsphere1.toto.com".
$ToAddress = [email protected]
#-----------------------------------------------------------------------------
$Title = "connection settings for vCenter.
$Author = "lady".
$Header = "connection settings".
$Login = [email protected]# for domain WHICH
$Password = "xxxxxxxxxx #
Add-pssnapin VMware.VimAutomation.Core
$HTMLHeader = "< HTML > < report VMware TITLE > < /title >"
$HTMLFooter = 'Made with the Script POWERSHELL 2.0 - Version of the script' + $ScriptVersion + ' < / HTML > ".
$ScriptVersion = "v1.0".
$Subject = 'VMware - VM inventory report'
$FromAddress = "VMware" + "@ foo.com.
$ColorArray = 'Red', 'Orange', 'Purple', 'Blue', 'Olive', 'SlateGrey', 'Orange', 'Purple', 'Blue', 'Olive '.
$ColorArrayIndex = 0
$HTMLHeader = "< HTML > < TITLE > VMware Report for ' + $vCenterServerName1 ' < / TITLE >.
$HTMLFooter = "Made with POWERCLI Script 5.0" - + $Author + ".." ".
$HTMLFooter += ' NOTE: $Date < / HTML > ".

$HTMLBody = "< BODY >".
$vCenter_inventory = @(get-VM |) Name Select-Object, NumCPU, MemoryMB, ProvisionedSpaceGB)
################################### OUTPUT #######################################
# HEADER
$HTMLBody += CreateHeader ("REPORT for vCENTER" + $vCenterServerName1 + ' < / police > "" ")
# INTRO TEXT
$HTMLBody += ' > <.
$HTMLBody += $vCenter_inventory

# SEND THE REPORT BY E-MAIL.
$HTMLBody += ' < / BODY > "# close HTML body
$HTMLPage = $HTMLHeader + $HTMLBody + $HTMLFooter
Send-Mailmessage-to $FromAddress - to $ToAddress - subject $Subject - BodyAsHTML-body $HTMLPage - normal priority - SmtpServer $SMTPServer
Write-Host "report was sent by E-mail to '$ToAddress' to ' $FromAddress
################################### CLEANUP #######################################
$HTMLHeader = «»
$HTMLBody = «»
$HTMLFooter = «»
$HTMLPage = «»
$vCenter1_Inventory = «»
$vCenterServerName1 = «»

-Very well, cutting some of your code, it works for me in any case:

# This sets the format of the HTML table

"$Header = @".

TITLE

"@

# The data collection

$vCenter_inventory = get - VM | Select-Object Name, NumCPU, MemoryMB, ProvisionedSpaceGB

# Convert to HTML format

$HTML = $vCenter_inventory | ConvertTo-HTML-Fragment

# Prepare Mail Message

$Message = "from the random text."

"$Body = $Header +""+ $Message +"

"+ $HTML +""

$smtpServer = "smtpserver".

$HostName = $env: ComputerName

$From = $HostName + "@littlenickey.se."

$To = "[email protected]".

# Send Message

Send-MailMessage - SmtpServer $smtpServer - $From - to $To - subject $Subject - body $Body - BodyAsHtml

This should give you a little nicer output in the form of a table.

How to sort the result
The pk of a table type is varchar2. It is composed of the number and the string, for example GD_345, GD_1123, GD_567.
If I use the order of term, the result is as follows:
GD_1123
GD_345
GD_567

However, I need to get the result as follows
GD_345
GD_567
GD_1123

How wirte SQL script?
Thank you very much!
Hey YOU,.

As it is the Varchar2 column Type and it is composed of Alpha - numeric characters. Try to extract the numerical value of the string.

Try this.
```
SELECT   *
    FROM TEMP_VAR
ORDER BY TO_NUMBER (SUBSTR (VAR, INSTR (VAR, '_') + 1)) ASC;
```
If you are not sure of previous characters '_', you can also use this query.

Thank you
Shankar

Published by: Viji Shankar on May 30, 2012 21:10

	DCIteratorBinding myIterator = ADFUtils.findIterator (iterator);
	myIterator.executeQuery ();
	myIterator.refresh (DCIteratorBinding.RANGESIZE_UNLIMITED);

How to interpret the result of validation.

Similar Questions

TITLE

Maybe you are looking for