How to load a "remote desktop"?

Similar Questions

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How do you uninstall Remote Desktop connection?

  Can help me please to no how do I uninstall the (Remote Desktop connection), I would be very graetfull for any help

  Remove / uninstall Microsoft Remote Desktop Connection 6.0 (KB925876)

  Go to Add/Remove Programs - uninstall KB925876

  If for some reason he's not here...

  You can go to C:\WINDOWS\$NtUninstallKB925876$\spuninst and run spuninst.exe directly from there.

• How can I use Remote Desktop connection to connect to my work computer?

  original title: Remote Desktop

  I have a computer with XP and Vista Home edition to the Home Office. From time to time, I would like to connect to my system to the home from work. Vista allows me to check a place to 'allow remote desktop', but don't tell me how to connect actually. Any thoughts?

  Unable to connect to a computer running Vista Home with remote desktop connection.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  You will need to use a third-party program such as LogMeIn.

• How to configure the remote desktop connection

  Original title: home remote desktop connection

  trying to desktop connection remote set-up on a spare home computer how I would go all this? my main computer is wired ethernet my spare part is wireless

  Hey Shawn,.

  Follow the steps in the link to set up a desktop connection remotely on computers.

  http://Windows.Microsoft.com/en-in/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  In addition, through the FAQ for remote desktop connection of

  http://Windows.Microsoft.com/en-in/Windows7/Remote-Desktop-connection-frequently-asked-questions

  For any questions, have a look on

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-using-Remote-Desktop-connection

• How can I use remote desktop to control my PC at home from my Surface?

  I tried searching for an answer, but all the "tutorials" are non-specific in the one area that I do not understand.

  I want to do is be able to use my tablet of Microsoft Surface of anywhere I have internet and use it to control my PC in Windows 8. Which doesn't seem to be the object of the Remote Desktop application, correct? Now, I have enabled Remote Desktop connections in Control Panel and have the application installed on my surface and they both use the same Live ID, but the next step listed is just 'type the name or IP address of the computer"and none of these tutorials explain how to know exactly what one of these things is. I tried to get the name I gave the computer, which also appeared on the window that I learned to remote connection settings, but nothing happened, and to be honest I don't know why he would do. There are a large number of computers on the internet and I don't see anything that would prevent me to a share with a different device name. On the other hand, rather too many results the app can't find.

  I thought then that I would try an IP address, but for some reason whatismyip.com said he did not know. It's probably something on the router and maybe the reason why the previous attempt failed, but I don't have control of the router, so if that's the case then I need an alternative.

  I'll also accept other software that would make it easier, let's just connect from these two devices and selecting from a list, but I have to be able to be controlled from a device Windows RT (I don't need to go the other way, and I do not think that that is supported anyway). Feel free to just suggest something even if you don't know it will work around the problem, it is not necessarily reproducible on your system, so the only way to know is to try it.

  Have you seen this page?

  http://Windows.Microsoft.com/en-us/Windows-8/Remote-Desktop-connection-frequently-asked-questions

  There are solutions for remote desktop connection problems. You do not want to enter the computer name or IP address.

  To find the IP address of your PC - open the charm of search and type cmd. Tap the command-line results of research. At the command prompt, type ipconfig and press ENTER. Find your network connection and note the default gateway address.

  Hope this helps,

  Kate

• How to prevent the Remote Desktop connections to change the refresh rate of premises?

  When remote users connect and that their system has a rate of refreshment, not supported by the local monitor, the display shows "this resolution/regeneration rate is not supported by the monitor." How can I prevent remote systems to change the settings of resolution/regeneration on the local PC?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  I hope this helps.

• How to set up Remote Desktop

  original title: how to connect to the xp computer

  I have a Windows 7 and a xp pro Office (which I would like to act as a server).  I would like to be able to access the files remotely.  I wanted to see if I'm able to do this with desktop connection remote.  I noticed it worked for local connections, but what if you're not on the same network?

  Hi droidus,

  You can find the troubleshooting steps in this document useful when you set up a remote connection between your Windows 7 and Windows XP computers.

  Let us know if that helps.

• How to establish a remote desktop connection?

  my place opperating

  
  

  To whom it may concern, I recently had problems with my computer, I went to the HP website for more help. I was talking to the engineer on the phone or the person, I was helping me. After asking a few questions we could not solve my problem however, he asked me over the phone for my permission to enter my computer from his computer that he was home and solve the problem itself. He was able to take control of my computer to fix my problem.

  Anyway, my father is an old man who only lives with me I live a couple 100 miles away from him. He had obtained a computer two years ago. I have myself worked on a computer on mine for 10 years I'm trying to help him when he called me on the phone better than I can, but it is very easily confused and has some good things down. My situation is that I can't drive because I am parapeliegic and I can't drive to his house. Therefore, it is very difficult for me to get down there to help.

  So I ask, is possible that I can get into his computer to my site so that I can fix it for him.

  Thank you for any suggestions you may have. Sincerely, Chris W.

  his opperating system is windows xp.  and mine is vista.

  This process is known as Remote Assistance.

  Here are the guides on how to use it:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Windows-remote-assistance

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-get-or-give-a-helping-hand-using-remote-assistance

  http://support.Microsoft.com/kb/305608

  http://video.about.com/Windows/Windows-XP-remote-assistance.htm

• Remote Desktop connection: How can I remove this program?

  How can I remove Remote Desktop Connection program?  I don't want to install a new version.  I just want to remove the program completely so cannot remote access another calculation and nobody can't computer mine of remote access for security reasons.

  Thank you

  To prevent the Office remote access to your computer (Windows Vista Business or Ultimate):

  1. Click the Start button.
  2. Right click on computer .
  3. Click on Properties .
  4. Click remote settings .
  5. Click do not allow connections to this computer .
  6. Click OK .

  I don't know how to uninstall the remote desktop connection program.  To manually remove the file that runs:

  1. Press the Windows key + R .
  2. Type %systemroot%\system32 in the box, and then click OK .
  3. Delete the file named mstsc.exe .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Using win xp remote desktop

  I created the XP model to connect remotely, but when I try to connect it keeps asking me a password, but it used to recognize my password.

  Hello Terry,

  There seems to be a problem with the remote desktop connection.

  Click on the link below and see if it helps.

  How to turn on Remote Desktop automatic login in Windows XP

  Good day!

• Remote Desktop password problem

  Help, please. I have 2 computers in my office connected via an ROC, I was connecting with success for more than 3 years. All of a sudden, I can't as says "system cannot log. Make sure your user name and the domain is correct. Passwords are case sensitive,"I have NO idea what that means and how to fix it. Business at the stop... I use windows XP.  The username and password are always exactly the same thing I restarted the two machines, still no luck

  Hi JaneNewton,

  1. did you of recent changes on the computer?

  2. is the computer connected to any domain environment?

  See the Microsoft articles below and check if it helps.

  You cannot log on after you remove the computer from the domain

  http://support.Microsoft.com/kb/317049

  How to turn on Remote Desktop automatic login in Windows XP

  http://support.Microsoft.com/kb/281262

• Remote Desktop connection requires the password when I did not

  I use Remote Desktop Connection to connect to my Windows 7 PC to computers with Windows XP employees. To do this, I need to put the credentials of the computer XP (name of login and password). It is a problem because the computers do not have a password. They are implemented in order to bypass the login step. How would I go about the use of DRC to connect to a computer without password?

  See if this article solves your problem:

  "How to turn on Remote Desktop automatic connection in Windows XP"
    <>http://support.Microsoft.com/kb/281262 >

  HTH,
  JW

• Remote Office - error message: version 6 Remote Desktop Connection Client or later is not installed

  Hello

  I am running windows vista home edition at home and I want to connect to my computer at work when I try it I get a message saying that the later version or version 6 Remote Desktop Connection client is not installed, it is not available in vista home? If not what is the best solution for this

  Thank you

  It is based on the operating systems on both ends of the connection.

  Here are some limitations you should consider where they apply: http://windows.microsoft.com/en-US/windows-vista/Connect-to-another-computer-using-Remote-Desktop-Connection.

  Here's how to enable Remote Desktop Connection in Vista: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

  Here another article on how to enable the remote desktop connection: http://www.mydigitallife.info/2007/01/26/turn-on-or-enable-remote-desktop-on-windows-vista/comment-page-1/.

  Here's how to work with the desktop client remote: http://www.onecomputerguy.com/networking/vista_remote_desktop_client.htm

  Here's how to add DRC to Home Basic using 3rd party software (if necessary): http://www.pctipsbox.com/add-remote-desktop-access-to-windows-vista-home-editions/.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• about Remote Desktop connection

  What is remote desktop connection? How can we create remote desktop connection? How can we date or file in the network computer in the domain name server, we have created? If the connection is wired how can reconnect interrupted sudden on desktop connection remote connection? what the network discovery & network location? What is command prompt, how can it helps us to get information on the connection of the computer on the network?

  Hi Berhanu,

  Thanks for posting your query in Microsoft Community.

  Remote Desktop connection is a technology that allows you to sit in front of a computer (sometimes called the client computer) and connect to a remote computer (called the host computer) in a different location. For example, you can connect your computer to work from your home computer and have access to all of your programs, files, and network resources as if you were in front of your computer at work. You can leave programs running at work and then, when you get back, you can see the desktop of your computer work displayed on your computer at home, with the same programs running.

  I would refer to the article below for more helpful information and Setup.

  Remote Desktop connection: frequently asked questions

  Connect to another computer using Remote Desktop connection

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.