How to load drivers hard drive for a repair?

Similar Questions

• How to partition a hard drive for a B50-70 for Linux? No problem with that?

  Hello

  How to partition a hard drive for a B50-70?

  I want to install Linux and keep Windows 8.1 also.

  This will affect the software factory example: back up hard drive function, OKR?

  Problems partitioning B50 of the 1970s?

  Is it acquisitions have 8.1 Windows on a laptop Lenovo-B50-7?

  What will happen if I got rid of Windows 8.1 operating system?

  Thanks in advance.

  Information on the machine:

  B50-70

  Model name: 20384

  Windows 8.1

  I've not seen / heard of successful use of the flash drive for recovery purposes. The default software using optical disk, when I used it on my G580.

  If your laptop does not have a CD / DVD burner, you may need to contact them directly to discuss this option.

  As to where he is? It is a hidden partition on the hard drive, is usually not accessible.

  Cloning the hard drive can not return to that partition hidden - it would be a little bit the clone of the drive to work.

  I recommend to download your manual of maintenance on the Support site and learn more about the 100% specific for your laptop recovery process.

  CB

• How to clear the HARD drive for confidential data before attaching to the third party?

  My HARD drive needs to be fixed and would like to know how to erase confidential data in the HARD drive before giving it to third parties.

  Reformatted would it be sufficient?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  The best way in my opinion is using AutoNuke in Dban. Make sure you have the desired data off the drive hard until you execute Dban. Once you run it, it's over.

• How to initialize a hard drive for the first time?

  I just got a new hardisk. What should I do before using it? Can someone give me instructions step by step?
  IM using Windows Xp

  In this case, shut down the PC, unplug the power cord, take anti-static precautions and install the disk drive. Turn on the PC and use disk management to partition/format-it as wish you...

  http://support.Microsoft.com/kb/309000

  ... NTFS file system is the best.

  To store your data, I recommend to move the My Documents folder...

  http://support.Microsoft.com/kb/310147

  ... but you don't have to do if you want to keep some data on C: and the rest on a partition on the new disk.

  You could also start to install some programs (games or other) on the disk by making custom installations and change the drive letter.

  Tricky

• MacBook Pro OS 10.8 retina no DVD drive, how to load drivers for HP PhotoSmart Premium C310 please

  MacBook Pro OS 10.8 retina no DVD drive, how to load drivers for HP PhotoSmart Premium C310 please?

  We do not have the software 10.8 HP for your printer posted on hp.com and yet, once that happens, you can just download and install. You don't need to do it though, in order to get your printer running on your new Mac.  Simply connect your printer, on the sur le meme same wireless network or via a USB cable, add in printing and fax and let the operating system find and install the software from the Apple software update.  You will be able to the printer and scanning will however be of Image Capture.

• How to add a 2nd hard drive for HP Pavilion DV7!

  How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

  (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

  Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

  (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

  Readers - Windows 7 PDF

  (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

  (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

  Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

  My solution.

• How to get personal files on a backup external hard drive for windows 7

  How to get files from a backup external hard drive for windows 7 pro. ? I DON'T WANT TO RESTORE WINDOWS 7, JUST MY PHOTOS & DOCUMENTS.    TO THANK THE TAXI 53 DRIVER

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  You can restore backed up files lost, damaged, or accidentally modified versions. You also to restore files individual, groups of files, or all files that you have saved.

  If you are restoring files from a backup that was made on another computer, the files are restored in a folder under the user name that was used to create the backup. If the user names are different, you must navigate to the folder where the files are restored.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  Using the Dell recovery disks to reinstall?

  The origonal drive failed?

  If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

• Upgrade hard drive for computer laptop dv6626us

  I searched for the hard drive on my laptop dv6626us upgrades. When I read the comments they seem to all be positive with regard to the replacement of my current (factory loaded hard drive). One of the concerns is that the computer has been delivered to the factory with Windows XP loaded. I don't see the comments of those who have Windows 8.

  Upgrading the hard drive for the dv6626us with windows xp installed at the factory would be compatible with the hard disk depending on whether I have found as being compatible for windows 8.

  recommended update: Seagate portable, SSHD hydrides disk HARD 1 TB Sata-600 n/p.

  The hard drive I have on the computer named above is: WD Scorpio WD1600B EVS - training 60RST0 settings: LBA 312581808.  This hard drive has been charged at the factory.

  Hello mikee1960,

  HP does not have hardware support for Windows 8 on any system purchased before October 1, 2011.  Most of the Windows 7 drivers work in Windows 8.

  Check out this page to see if your computer has been tested by HP with Windows 8.

  You can run the Upgrade Wizard, which will scan your PC and report on what is currently installed on your PC is compatible with Windows 8.  This guide was updated for Windows 8 provides lots of information which is needed for all those planning the upgrade.

• I can install Windows 7 on a new hard drive for HP Envy m6 1205dx

  My HP Envy m6-1205dx son is a notebook of 2013. The screen was broken and I replaced one. Now he says that there is not a BONE, I tried to install a full version of Windows 7 Professional, and he said that he there was not a boot device. I've reconfigured the BIOS to boot with the CD/DVD ROM and it started installing. When he arrives at the point of asking where to put the installation there is no option. I checked the connection to the hard drive and it is not a problem here. I think to buy a new hard drive to install the Windows 7 operating system, I am afraid that it will not work or he will say that I need to install the drivers. This laptop originally supplied with Windows 8. Can I install this version of Windows on this laptop? If I need to install the drivers how can I get them? It cannot be a website to download the drivers on your computer. I can't do without the computer having an operating system. I downloaded some drivers from a link, I saw on You Tube and put it on a flash drive, but none was consistent, one of them did read on a different/more older computer I tried to install this OS on and it says that the driver was out of date. It seems to me that a (FULL VERSION) drivers and everything else you might need. I'm not computer savvy, so I do not know! I'm just trying to save my investment of $600 on this computer without spending $300. I can get a new hard drive for $80 and it was on that I would go; However, I will buy a new Windows 8 operating system if it is the only option.

  There is no device driver Windows 7 for your model, only Windows 8:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5359748&cc=us&DLC=en&LC=en

  If there is no driver, your PC may not work correctly (No. LAN or WiFi, Audio, USB, etc.) after the installation of Windows 7.

  Check your hard drive, if the laptop has been abandoned the drive may be defective and must be replaced.

  You can order a support of HP recovery:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07143&cc=us&DLC=en&LC=en&product=5359748

  J W Stuart: http://www.pagestart.com

• New hard drive for HP6930 - BSOD when installing the OS

  I recently bought a new hard drive for my HP6930 so I can switch between my work and home demands (they cannot reside on the same hardware).

  Both drives are Fujitsu SATA 160 GB.

  After swapping the drives and boot from CD to install the operating system - I get a BSOD, hardware failure - "the system was arrested to prevent damage...". "with a comment about the check of the hard drive.

  Can anyone provide insight into what I'm doing wrong?

  Thank you

  Dave

  You can integrate the drivers Sata (ICH9M-E/M SATA AHCI) and burn a new cd XP with nLite .

   

  Here is a guide showing how to integrate and here drivers Sata. 7-ZIP or Universal Extractor are good at unpacking the installer.

• How to clear the hard drive on my old iMac of 2008?

  I have a 2008 iMac I want to recycle. How to clear the hard drive?

  (What is PPC?)

  PPC stands for Power PC. Is the name used to refer to the old Macs that uses a Motorola processor instead of Intel chips used today. To clear your old Mac follow the advice in this document from Apple... What to do before you sell or give away your Mac - Apple Support

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

  This model encrypted?

  If this is not the case, how to destroy the hard drive? Where is the hard drive?

  Hi @Diane47,

  Thanks for joining the Forums of HP Support with your request to printer.

  I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

  HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

  You can clear the memory by restyoring the printer back to the default values.

  1. on the printer Panel, select Setup.

  2. from the Configuration menu, select Tools.

  3. on the Tools menu, select Restore Factory Defaults.

  HP offers to recycle their products for you. If you want to know more about it, please click here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Adding 3rd hard drive for HP Pavilion Elite m9250f

  I have a Pavilion Elite m9250f running Windows Vista Home 64 bit. The computer currently has two 500 GB hard drives for a total capacity of 1 TB. I would like to add a third drive to increase storage capacity.  I have a SATA to 2 to and cables. When I tried to install the new drive above the two existing disks, he did not slide smoothly. When I removed the already highest reader, I could slide the new drive into but the screws are not line up properly with the new drive. This leads me to believe that I can not install a third drive in the Bay. Is this a correct assumption?

  I have an available expansion Bay below the optical drive but am not sure that it is usable for a hard drive. If the use of the expansion Bay is possible, do I have to buy a hook or how to mount the drive in this space?

  If necessary, I can copy the data from the secondary drive on an external drive and replace it with the new drive. However, I need confirmation that the secondary is the player in the foreground of both in the hard disc enclosure.

  Thank you for your help.

  If the task under the existing optical Bay is open, just use an adapter to fill the space and to mount the drive in there.  Make sure of course that there is a power cord and a SATA port.

  Here is an example: http://www.newegg.com/Product/Product.aspx?Item=N82E16816119027