Minimized external program

Similar Questions

• All links to external programs open my homepage instead of the target URI

  All links to external programs has recently began to open my homepage rather than the target URI. This only happens when Firefox is my default browser, not when other browsers are set to be the default browser. I see this more often with links in e-mail messages in Thunderbird, but I also reproduced the problem by inserting a link in a document of LibreOffice Writer and clicking on it.

  Looks like a problem with the default browser where the command is missing %U parameter that caused the link not not to be send to Firefox.

• Satellite L550D R815 - engraver of DVD not recognized in external programs

  I have a problem, my dvd burner is not recognized by external programs such as Ace CD Burner or CdBurnerXP. I can burn DVDs and CDs in windows, but I want the added functionality of these external programs.

  I searched on the site of toshiba for updated drivers, but there are none, and Googling TSSTCORP CDDVDW Ts - l633P Ata Device (this is what is listed under my CD-ROM in Device Manager) gives no useful result.

  If it's any help the device type is listed as: Dvd/Cd Rom and manufacturer readers is (Standard CD-ROM drives)

  All do you know of any other driver that I can use to make accessible to other programs? You can provide any help would be greatly appreciated.

  Thank you

  Bob Fischl

  Edit: I found the program included Toshiba dvd burner and it recognizes.

  > I found the program included Toshiba dvd burner and it recognizes.
  Thanks for the comments!

• How to call external programs?

  I've seen people to call external programs through LabVIEW and was curious to know what functions you could use to do this.

  I'm sure that his works using one of the ActiveX or maybe 'open application reference .vi.

  Can someone tell me (or show me) a small example of how to open an external program (that is to say, excellent, Notepad, etc.) by programming

  HI Cory,.

  Take a look using the > examples > communicate with external Applications > ActiveX > Excel > Table write to XL.vi

  To take a step back and answer your Q in General.

  Required or possible methods to interact with external applications depends on of the external application and that she supported mechanisms.

  SysExec

  Used for tha programs can be called from a DOS command line.

  DCOM

  The app was to support this and that you are working with him to of peeks and pokes.

  ActiveX

  Only available on Windows, methods, and properties that depend on all of the app.

  .NET

  New version to interact with applications.

  Have fun!

  Ben

• How to run a 3d model in adobe reader to external program

  Is it possible to run a 3d model with adobe reader of external program?

  For example, by selecting a node of the 3d model spefic and and more pronounced in adobe reader.

  Thank you very much!

  No, you use the API of SDK Acrobat standard for plugins.   With this, you can create a plugin for Acrobat or Reader, or both. If you create a new player, you will need to get a license from Adobe.

• When the external program C and Java Class loaded in a schema

  Hi all
  I understand that both an external C program and a Java class are loaded after two of them are called in the PL/SQL environment, once they are published and loaded into shared libraries. Is this correct?
  
  Best regards
  Val

  An external procedure is never loaded into a schema. Oracle calls the external program.

  A Java class that is part of a Java stored procedure, however, is charged as a PL/SQL procedure is created - at compile time.

  Justin

• Scheduler external program string type does not manage the credential name

  Hello
  
  I have the following Setup: a basic string containing the type of program 'external '.
  
  11 g, for the launch of work on the 'external' program, we now use the new feature 'name of credentials' (no installation is necessary for the o/s file level as in 10 g).
  He was actually very good.
  
  But when I call it a string containing the external program, I got an error when setting credential_name parameters: ORA-27351: conflicting values of the attributes of CREDENTIAL_NAME and JOB_TYPE task.
  
  So I call the string without the name credentials and the external program is managed, but using 10 g 'old style' method based on the configuration of file db (external program is therefore launched whith user defined in externaljob.ora). You also lose the benefit of the credential to submit external stains on different users.
  
  It seems that the management of the credential_name is not handled in the CHAIN. It's a bug, dev missing or there is an option for this?
  
  Thanks for your help.

  Hello

  You probably want to do is step identification information.

  You can do it by using alter_chain on the particular stage with the attribute value credential_name.

  http://download.Oracle.com/docs/CD/B28359_01/AppDev.111/b28419/d_sched.htm#CHDIAICJ

  Hope this helps,
  Ravi.

• AIR-call external program

  Hello, I do an AIR application, and I want to run an external program as a result, or suppose I want to call a java program on the client machine, I don't want to do any server to do this, is possible to do?, please let me know

  Regarding

  Amar Singh deep

  AIR 2.0 beta includes this feature, but to be enabled AIR application must be delivered in a native installation package, not an internet normal AIR install.

  AIR 2.0 beta can be found here:

  http://labs.Adobe.com/technologies/air2/?TrackingID=FBPKJ

  Mark

• Problems with the external program

  I create programs programmer with a string. A job will be created to launch the channel. One of these programs Planner will have to call a file is under windows. Everything goes well with the exception of which translates an error indicating that the process cannot find the files referenced in the external program.
  
  Here is the error of the battery being captured in the job log.
  
  CHAIN_LOG_ID = "16735", STEP_NAME = "L90_ARCHLOGRMANBACKUP", ORA-27370: slave to the job could not launch EXECUTABLE type work
  ORA-27300: dependent operation of the OS: access enforcement officer failed with the State: 2
  ORA-27301: OS Error Message: the system cannot find the specified file.
  ORA-27302: an error occurred in: 6a sjsec
  ORA-27303: additional information: the system cannot find the specified file.
  
  This is the code I used to create the program:
  
  BEGIN
  SYS. DBMS_SCHEDULER. CREATE_PROGRAM
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , program_type = > 'EXECUTABLE '.
  , program_action = > ' C:\WINNT\system32\CMD. EXE'
  number_of_arguments = > 3
  activated = > FALSE
  , comments = > 'runs a RMAN backup compressed all archive logs generated by this process.
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 1
  , argument_type = > "VARCHAR2".
  , default_value = > "/ q"
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 2
  , argument_type = > "VARCHAR2".
  , default_value = > "/ c".
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 3
  , argument_type = > "VARCHAR2".
  , default_value = > 'C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat '.
  );
  
  SYS. DBMS_SCHEDULER. ENABLE
  (name = > ' RTDB.) ARCHLOGRMANBACKUP');
  END;
  /
  
  To verify that the files referenced in the above code and paths are correct, I spent to the DB host and run the following command from the beginning... Run:
  
  C:\WINNT\system32\CMD. EXE/q/c C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat
  
  It works very well.
  
  Someone at - it ideas?
  
  Thank you
  
  -Joe

  Hey Joe,

  What you run here are steps of external string, which are transformed into external work when they are executed (see steps chain) upwards in the view of all_scheduler_jobs so that they are running.

  All restrictions for outdoor work hold for the external chain so that you will always have to make sure that the agent Scheduler service is running as a user who has the logon as batch windows privilege and upward.

  A simple external task works for you? If this is not you should probably get that working first and then debug your chain example later.

  Hope this helps,
  Ravi.

• Virtual Blu Ray player or Blu Ray drives external programs... Which one? Myth or Muffin?

  Greetings one and all,

  Alrighty then let me are the sitch. When I bought my computer two years ago I got to worth the money, cash, dough or dollars to buy, so I had to skimp on what I wanted. The main thing I have the proverbial axe was the disk/drive Blu Ray, my PS3 could handle plqaying already so I was not too broken not to have one in the computer, after all, it was a short walk to the center of pop entertainment in the dics and press play.

  Well, it was then and this is now and I have become totally lazy and should rather not do the loooong now trek to the PS3 to play my Blu Ray DVD more and prefer to have this accomplished through my computer without the need to install another drive. So now I'm looking for ways to accomplish these tasks by getting either a Blu Ray drive/external drive, or use one of the many "virtual drive Blu - Ray reader/programs I've seen available for download on the net?

  Now the first choice is to say... the external hard drive is pretty easy to install, just pop something cord USB into the USB port and tah dah Uncle Bob, you have a Blue Ray disc/player! The second path, that the program Virtual Drive/drive Blu Ray, becomes a much more confusing question, a question I am now in touch with you very smart people. Okay here's my stupid question...  These programs will work through my factory installed Combo drive CD/DVD Drive to play my Blu Ray DVD on my calculation? Or do I really have to buy something else to achieve?

  "Help me Obiwan you're my only hope!" Tiffany Snow

  Hi Tiffany Snow,

   
  Welcome to the Microsoft Community, thanks for posting your question in the Microsoft Community. You will need a physical bluray player to read physical disks. A virtual disk appears only on the computer disk images.
   
  If you need any other help, please let know us, we will be happy to help you!

• Read the text of an external program

  I'm sure it will be a Windows Library thing, but any help would be great.

  Here's what I need.

  In a software project, I will carry out an FTP (WSFTP) so the device that I connect can download start-up files.

  For now, operators must allow unit to complete its startup process. They know its finished reading the text of WSFTP

  text window. I want to make is that my program enter this text of WSFTP text buffer.

  I'm guessing this will require window and control HWND. I never had much of a Windows programmer.

  Any ideas?

  Looks like a winning approach.

  WayneS1324 wrote:

  Or maybe I could set up a simple FTP server in LV?

• Running Powershell since an external program and rename files

  Hello

  I'm new to powershell, I want to run a script powershell from another program. The program is 12d (this is a civil engineering program). It executes files .cmd and .bat as shell command files (I did successfully already). I am sure that you can also write powershell commands.

  Can I create .ps1 files. As a previous post, I want to rename the files (insert text in the middle of the file name - number of files not defined). Use the following statement? Also what other statements should I insert in the powerscript file.

  Get-Item. \ *. * | ForEach-Object {Rename-Item $_ ($_.)} (Nom: remplacer "copie de", "")}

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/cmd-insert-text-into-the-middle-of-the-file-name/63b25adc-C257-4064-b71a-3aac2c8cf11c

  Thank you for your help

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• The cutting tool and Google Analytics or any external program

  Could you please help?  Use of the tool cutting in Google Analytics.  I have it on my bottom toolbar but when I click on it it takes me to another program.  I need to cut a card.  How can I have it so that in Google Analytics. Thank you.

  Alternate: have you tried to hold the Windows key and press the PrtSc key? When you do this, the screen goes black for a few seconds and you can find the image in the images folder, in a folder called screenshots. It is saved automatically.

• My design dreamweaver css code is not correctly copy on my external program to send emails.

  I use a template and put the code in the program that I actually send the email through. I used a template, dreamweaver and css code is not all come through. When I receive the test e-mail in my Inbox, some parts are correct, but others are just completely false. I tried to figure out how to solve this problem, but I'm still new to dreamweaver and coding in general.

  Chances are that you try to process an html email as if it were a normal html page and left some of your css in thesection is stripped out of your e-mail client.

  It is difficult to say without seeing the code that you are handling well.

  HTML emails have a different set of rules than the normal html pages. Message from Nancy O here, explains a good part of it: HTML email & Newsletter blasts - http://alt-web.com/

• Download files without PHP or other external programming

  Hello

  I have a question it's leaving me every night.

  How to download a file without using PHP or other programming language, using CS5.5 Flash and ActionScript 3.

  Is it possible?

  Fernando Oliveira

  Programming AS3.

  If I have the right of you, you want all these desktops (170?) to be able to download files specified in an XML file.

  To use the local file system (for example, to save a file), you will need to make an executable. A user to load a SWF file in their browser will never have access to download and save a file to the user's computer. Flash is designed in this way, if you don't mind that a Web site stores files on your computer (beyond the innocent witnesses).

  You can use Adobe AIR, which can save files or use an Extender of projector SWF like MDM Zinc or scenes mProjector. They can also do well and sometimes much more than AIR. I use all 3 and I download files in apps (AIR) and office (MDM, Zinc). All 3 executables can be made for Windows, OSX and Linux.

  An executable is acceptable?